diris a40/a41 rs485 â profibusÂ® dp - SOCOMEC Group

More documents

Recommendations

Info

DIRIs 699 A GB DIRIS A40/A41 - RS485 - PROFIBUS ® DP PRElimiNaRy OPERatiONs For personnel and product safety please read the contents of these operating instructions carefully before connecting. Check the following points as soon as you receive the Diris A40/A41 package: • the packing is in good condition, • the product has not been damaged during transit, GENERal iNfORmatiON Functions This optional module must be connected to the DIRIS A40/A41 (ref. 4825 0A40, 4825 0A41, 4825 1A40, 4825 1A41). It provides an Rs485 serial link (2 or 3 wires) with pROFIBUs ® Dp protocol for the use of DIRIS A40/A41 from a PC or PLC. Recommendations: You should use a garantieed cable PROFIBUS. 4 DIRIS A20 - Réf. : 536 182 A GB • the product reference number conforms to your order, • the package contains the product, • a CD-Rom. General points In a standard configuration, an RS485 link allows 1 to 32 DIRIS A40/A41 to be linked to 1 to 32 pieces of equipment using the PROFIBUS ® -DP protocol. The maximum communication speed is 1.5 Mbauds over 200 m. This distance can be increased if the speed is reduced (standards: EN50170). NB : An active termination must be fitted at both ends of the connection, which can be found either on the RS485 module (attached by moving the 2 switches to ON), or directly on the PROFIBUS-DP connector (D-Sub 9-pin). 876_786_A_gb.indd 4 3/04/09 10:50:47
DIRIS A40/A41 - RS485 - PROFIBUS ® DP iNstallatiON cONNEctiON The option modules are installed on the rear panel of the DIRIS A40/A41 in one of the four positions provided. DIRIs 342 A DIRIs 469 B The DIRIS A40/A41 must be switched off Note : Correspondence with a HAN BRID connector + = B (red) - = A (green) DIRIs 469 B DIRIs 343 A Fix the option modules next to each other Follow indications when connecting the terminal switch on voltage supply Sub D-9 DIRIS A20 - Réf. : 536 182 A GB 876_786_A_gb.indd 5 3/04/09 10:50:51 5 GB
Page 1 and 2: SOCOMEC GROUP switchiNG PROtEctiON
Page 3: GB contents PRELIMINARY OPERATIONS
Page 7 and 8: cOmmuNicatiON addREss > Example : C
Page 9 and 10: activatiON Of thE PROGRammE via thE
Page 11 and 12: DIRIS A40/A41 - RS485 - PROFIBUS ®
Page 17 and 18: mOdulE 1: MAIN MEASUREMENTS Output
Page 19 and 20: Calculation of the values allocated
Page 21 and 22: Calculation of the values allocated
Page 23 and 24: mOdulE 4: SWELL/TREND VOLTAGES/IN M
Page 25 and 26: mOdulE 6: PHASE TO PHASE VOLTAGE HA
Page 27 and 28: mOdulE 8: MIN / MAX INSTANTS This m
Page 29 and 30: mOdulE 9: SPECIAL FRAME Input frame
Page 31 and 32: mOdulE 9: SPECIAL FRAME List of val
Page 33 and 34: mOdulE 9: SPECIAL FRAME List of val
Page 35 and 36: mOdulE 9: SPECIAL FRAME DIRIS A40/A
Page 41 and 42: 876_786_A_gb.indd 41 3/04/09 10:51:

diris a40/a41 rs485 â profibusÂ® dp - SOCOMEC Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

diris a40/a41 rs485 â profibusÂ® dp - SOCOMEC Group