MAINTENANCE MANUAL - Meritor
MAINTENANCE MANUAL - Meritor
MAINTENANCE MANUAL - Meritor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lubrification and maintenance<br />
Lubricant Specifications<br />
Figure 10 Table w / Highway and Urban Delivery (Applicable in FF and FD including FD-931, FD-933 and FD-<br />
961)<br />
Part greasing interval grease 2 <strong>Meritor</strong><br />
Specification<br />
• King pins<br />
• Kin pin bush<br />
• Pivots direction arms<br />
• Pivots connection arms<br />
• Direction bar1 Once a year or<br />
whiever comes first<br />
Multi purpose<br />
grease 2<br />
0-617-A 1<br />
0-617-B 2<br />
1 Applies to pivots on Easy Steer shafts and Conventional. Inspect pivots every 160,000 km (100,000 miles) for wear and damage.<br />
Perform maintenance as necessary.<br />
2 <strong>Meritor</strong> recognizes that the industry continually seeks to improve the selection and use of synthetic grease in vehicle maintenance.<br />
However, as we know, some sealants expand into contact with synthetic grease. See <strong>Meritor</strong> references about the application of<br />
synthetic grease before using it in vehicle maintenance.<br />
Figure 11 Table of Specification and greasing intervals for non-tractive Front Axle<br />
Part greasing interval grease<br />
• King pins<br />
• Kin pin bush<br />
• Pivots direction arms<br />
• Pivots connection arms<br />
• Direction bar1 Cube Unit Sealed for Trucks<br />
Once a year or<br />
whiever comes first<br />
Cube doesn’t require<br />
lubrication<br />
Multi purpose<br />
grease<br />
<strong>Meritor</strong><br />
Specification<br />
0-617-A<br />
ou<br />
0-6187B<br />
1 Applies to pivots on Easy Steer shafts and Conventional. Inspect pivots every 160,000 km (100,000 miles) for wear and damage.<br />
Perform maintenance as necessary.<br />
Figure 12 Specification Table and Wheel Hub Oil Change Intervals<br />
Oper. on Road/<br />
Intervals<br />
Check<br />
oil level<br />
1.600 km<br />
(1.000<br />
miles)<br />
Cambiar<br />
oil<br />
O que<br />
ocorrer<br />
primeiro:<br />
Troca de<br />
vedadores.Realinhamento<br />
de<br />
Freios.<br />
160.000<br />
km<br />
(100.000<br />
miles)<br />
Uma vez<br />
ao ano<br />
Intervals for off-road<br />
operation<br />
Check<br />
oil level<br />
1.600 km<br />
(1.000<br />
miles)<br />
Cambiar<br />
oil<br />
O que ocorrer<br />
primeiro:<br />
Troca de vedadores.Realinhamento<br />
de<br />
Freios.<br />
160.000 km<br />
(100.000<br />
miles)<br />
Uma vez ao<br />
ano<br />
NLgI<br />
graduation<br />
NLgI<br />
graduation<br />
1 Acceptable Designations. Motor Oils Multi Weights are acceptable if SAE values end in 40 or 50.<br />
2 Acceptable Designations. Motor Oils Multi Weights are acceptable if SAE values end in 0.<br />
Note: The conditions stated in the User’s Vehicle Manufacturer override the conditions contained in this manual<br />
Grase classification<br />
6% Lítio<br />
12-Hidroxyl Stearato<br />
8% Lítio<br />
12-Hidroxyl Stearato<br />
grase classification<br />
Temperatura<br />
externa<br />
16 <strong>MAINTENANCE</strong> <strong>MANUAL</strong><br />
1<br />
ou<br />
2<br />
Sealed unit None No<br />
<strong>Meritor</strong><br />
Specif.<br />
0-76A<br />
Oil Gear<br />
0-76D<br />
Oil Gear<br />
0-76E<br />
Oil Gear<br />
0-76J<br />
Oil Gear<br />
Óleo Motor<br />
Carga Pesada<br />
Óleo Motor<br />
Carga Pesada<br />
Militar<br />
Specif.<br />
MIL-L-2105-D<br />
MIL-L-2105-D<br />
MIL-L-2105-D<br />
MIL-L-2105-D<br />
MIL-L-2104-B<br />
-C, -D ou E<br />
MIL-L-2104-B<br />
-C, -D ou E<br />
Oil<br />
description<br />
GL-5 SAE<br />
85W/140<br />
GL-5SAE<br />
80W/90<br />
GL-5SAE<br />
85W/140<br />
GL-5SAE<br />
75W<br />
6% Lithium<br />
12-Hidroxystearato<br />
or lithium<br />
complex<br />
API-CD,<br />
-CE-SF ou<br />
-SGSAE 40<br />
ou 50<br />
API-CD,<br />
-CE-SF ou<br />
-SGSAE 30<br />
See the grease<br />
manufacturer’s<br />
specifications<br />
regarding working<br />
temperature limit.<br />
External temperature<br />
C° F°<br />
Min Max. Min. Max.<br />
12 No 10 No<br />
-26 No -15 No<br />
-40 No -40 No<br />
-40 2 -40 36<br />
12 No 10 No<br />
-26 No No
Change language