MAINTENANCE MANUAL - Meritor

Lubrification and maintenance
Lubrification and Maintenance
Figure 19 Lubrication, inspection and maintenance table
Service Intervals
Component
(See page 15)
48
hours
8.000
km/
100
hours
Primeros
10.000 km
operación
16.100
km
32.200
km
58.000
km
64.000
km
80.500
km
160.000
km
5.000 6.000 10.000 20.000 36.000 40.000 50.000 100.000
Tie bar end
miles miles miles miles miles miles miles miles
Group 1 Application I L*
Group 2 Application I L*
Group 3 Application I, L*
Group 4 Application I, L*
Group 5 Application
Inspect the tie bar assembly
I, L*
Group 1 Application I
Group 2 Application I L
Group 3 Application I
Group 4 Application I
Group 5 Application I I L
Inspect tie bar I L
Steering arm pivot I L
Easy Steer® axle pivot I L
Sealed pivot I L
Steering arm I L
King pins, bushings I L
Sttering arm bolt I L
Axle bearings
Inspect vertical play in
I L
Group 1 Application I
Group 2 Application I L
Group 3 Application I
Group 4 Application I
Group 5 Application
Desgaste bujes superiores
y inferiores de los
pernos maestro
I
Group 1 Application I
Group 2 Application I
Group 3 Application I
Group 4 Application I
Group 5 Application
Key nuts
I
New vehicle T
Vehicle in use T
Inspection sealed hub unit I
20 MAINTENANCE MANUAL
320.000
km
200.000
miles
I = Inspect
L = Lubricate
T = Tighten with the specified torque
*If your vehicle is washed with a pressure washer, the lubrication intervals must be more frequent. For the models MF 06 (5301), FMS 07, FMS 07 RA,
lubrication must be performed every 20.000 km.