SILRES® resins - Brenntag Specialties, Inc.
SILRES® resins - Brenntag Specialties, Inc.
SILRES® resins - Brenntag Specialties, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION III.<br />
S I L R E S ®<br />
R E S I N S
SILRES ® RESINS<br />
FOR THE COATINGS INDUSTRY<br />
Silicones are versatile chemicals that are used in many diverse<br />
formulations and applications. Because of this versatility,<br />
SILRES ® <strong>resins</strong> cover a wide range of products and provide a<br />
complete source of solutions for the coatings industry. These<br />
include silicone <strong>resins</strong> for the OEM, Architectural and Special<br />
Purpose Coatings markets. The product platform includes<br />
formulating technologies ranging from Powder Coatings, Solvent<br />
Borne and Water Borne Coatings to High Solids Coatings.<br />
Formulating Chemists can choose from these <strong>resins</strong> to address<br />
a vast array of performance requirements. These include<br />
properties such as water repellency, long term UV durability,<br />
high performance corrosion protection and resistance to<br />
thermal extremes.<br />
WACKER SILICONES: Your Source<br />
for Quality, Innovation and Service<br />
WACKER SILICONES, with more than 40 years of silicone<br />
manufacturing experience, is widely known around the world<br />
as a leader in silicone technology. It has a reputation for<br />
quality manufacturing, products that perform, and customer<br />
responsiveness. With a focus on building close collaborative<br />
partnerships with its customers, WACKER brings innovation, service<br />
and creative solutions to your manufacturing challenges.<br />
S I L R E S ® R E S I N S<br />
As a customer of WACKER SILICONES you benefit from the<br />
service offered by WACKER, one of the largest global chemical<br />
manufacturers. With a host of complementary chemicals and<br />
technologies, WACKER supplies a “total solutions concept” to your<br />
chemical needs.<br />
Partners in Progress<br />
To distribute many of its silicone products in the Americas,<br />
WACKER SILICONES has an exclusive distributor partnership with<br />
BRENNTAG, INC., known for their knowledgeable and technically<br />
trained sales force, and industry experience.<br />
SILRES ® Resins for Longer-Lasting Coatings<br />
SILRES ® <strong>resins</strong> provide improved performance for a wide range of<br />
coatings. With SILRES ® intermediates, formulators can optimize<br />
a coating’s property spectrum to increase resistance to high<br />
temperatures, UV radiation, and moisture. SILRES ® intermediates<br />
will not interfere with coating hardness, baking rate, mechanical<br />
resistance, pigment compatibility, or adhesion. They offer impressive<br />
weathering results and impart resistance to high temperatures.<br />
SILRES ® <strong>resins</strong> are used an a wide variety of applications and are<br />
available in many formulations.<br />
1
POWDER COATINGS<br />
MARKETS<br />
OEM<br />
General Industrial<br />
Coatings<br />
Silicone Resins for<br />
Powder Coatings<br />
Heat Resistant Powder<br />
Coatings for<br />
Barbecue Grills<br />
Fireplace Inserts<br />
Smoke Stacks<br />
Engine Block<br />
Mufflers<br />
Appliance Coatings<br />
Miscellaneous OEM<br />
Auto Metal Parts<br />
General Industrial<br />
Metal Finishes<br />
Fumed Silica Additives<br />
In Powder Coatings for<br />
Ease of Fluidization<br />
Ease of Grinding<br />
Anti-Caking<br />
Improved Spray Application<br />
Uniform Film Application<br />
FEATURES AND USES<br />
Phenyl silicone resin<br />
Designed for blending<br />
with other <strong>resins</strong><br />
Methyl phenyl silicone resin<br />
Dual purpose: sole film<br />
forming resin and<br />
blending resin<br />
Silane treated hydrophobic<br />
fumed silica<br />
PRODUCT<br />
SILICONE RESINS FOR GENERAL INDUSTRIAL OEM POWDER COATINGS<br />
SILRES ® 603<br />
SILRES ® 604<br />
ADDITIVES FOR POWDER COATING TO ENHANCE FLUIDIZATION & APPLICATION<br />
Enhances fluidization of<br />
powder coatings,<br />
imparting hydrophobicity<br />
Use levels: 0.1–0.3%<br />
Untreated hydrophilic<br />
fumed silica<br />
All purpose hydrophilic<br />
fumed silica<br />
Use levels: 0.1–0.3%<br />
Specially treated<br />
hydrophobic fumed silica<br />
Enhances fluidization of<br />
powder coatings, imparting<br />
high hydrophobicity<br />
Use levels: 0.1–0.3%<br />
HDK ® H15<br />
HDK ® N20<br />
HDK ® H30RX<br />
KEY ADVANTAGES<br />
Imparts and enhances UV<br />
and heat resistance upon<br />
blending with film formers<br />
Excellent compatibility<br />
with a wide range of other<br />
organic film forming <strong>resins</strong><br />
Heat resistance to 500 o C<br />
Excellent heat resistance<br />
Good adhesion<br />
characteristics over lightly<br />
sand blasted metal surfaces<br />
Excellent resin for clean light<br />
color films: resists yellowing<br />
at exposure up to 250 o C<br />
Heat stability to 550 o C<br />
Color stable to 250 o C<br />
Provides excellent<br />
combination for<br />
hydrophobicity<br />
and fluidization<br />
Versatile fumed silica<br />
provides excellent<br />
fluidizing properties<br />
Provides optimal cost to<br />
performance benefits<br />
Very effective in<br />
clear coatings<br />
Provides excellent<br />
combination for high<br />
hydrophobicity<br />
and fluidization<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
Clear, solid flakes<br />
Sp. Gr.: 1.34–1.35<br />
Softening point above 60 o C<br />
Hydroxyl content: 3–5 %<br />
Clear, solid flakes<br />
Sp. Gr.: 1.31–1.32<br />
Softening point above 55 o C<br />
Hydroxyl content: 4–7 %<br />
Hydrophobic<br />
Silane treated<br />
100–140 m 2 /g<br />
Hydrophilic<br />
Untreated<br />
170–230 m 2 /g<br />
Hydrophobic<br />
Specially treated<br />
270–330 m 2 /g<br />
2
SOLVENT BORNE COATINGS<br />
MARKETS<br />
OEM<br />
General Industrial<br />
Coatings<br />
Silicone Resins in Solvent<br />
Borne High Solids Coatings<br />
for General Industrial Metal<br />
Finishes Where UV and Heat<br />
Resistance Are Required<br />
Heat Resistant Coatings for<br />
Chimneys, Furnaces,<br />
Gas Boilers, Heat<br />
Exchangers, Light Bulbs,<br />
Barbecue Grills,<br />
Fireplace Inserts, Mufflers<br />
Smoke Stacks, Engine Block<br />
Appliance Coatings<br />
Miscellaneous OEM<br />
Auto Metal Parts<br />
Rheology Control Additives<br />
Sag Control for High<br />
Solids Coatings<br />
Anti-settling<br />
Thickening to Paint<br />
and Coatings<br />
Improved Suspension<br />
FEATURES AND USES<br />
Methyl phenyl silicone resin<br />
Medium hard silicone resin<br />
Use in medium solids and<br />
medium hard coatings<br />
Low viscosity and high solids<br />
make it resin of choice for<br />
blending with other binders<br />
Methyl phenyl silicone resin<br />
Dual purpose: sole film<br />
forming resin and blending<br />
resin with other<br />
organic binders<br />
Methyl/methoxy<br />
siloxane polymer<br />
Virtually solvent free<br />
Cures at<br />
ambient temperature<br />
Use in heat resistant,<br />
hydrophobic and/or<br />
non-stick coatings<br />
Silane treated hydrophobic<br />
fumed silica<br />
Use when moderate level<br />
of thixotropy coupled with<br />
hydrophobicity is desired<br />
Untreated hydrophilic<br />
fumed silica<br />
All purpose hydrophillic<br />
fumed silica<br />
Provides thixotropic<br />
properties to coatings<br />
PRODUCT<br />
KEY ADVANTAGES<br />
SILICONE RESINS FOR GENERAL INDUSTRIAL OEM SOLVENT BORNE COATINGS<br />
SILRES ® SY 409<br />
SILRES ® REN 80<br />
SILRES ® MSE 100<br />
Good hydrophobicity<br />
Superb heat resistance<br />
Air-drying in combination<br />
with suitable organic <strong>resins</strong><br />
Excellent compatibility with<br />
other organic <strong>resins</strong><br />
and film formers<br />
Low VOC<br />
High solids<br />
Imparts hydrophobicity<br />
Provides excellent heat<br />
resistant coatings to 500 o C<br />
Aluminum pigmented<br />
coatings resist temperature<br />
up to 650 o C<br />
Curable at room temperature<br />
Low smoke generation —<br />
yields low smoke heat<br />
resistant coatings<br />
Cured films offer<br />
excellent hydrophobicity<br />
Imparts excellent nonstick<br />
characteristics<br />
Coatings resist<br />
temperatures to 650°C<br />
FUMED SILICA AS RHEOLOGY MODIFIERS FOR SOLVENT BORNE COATINGS<br />
HDK ® H15<br />
HDK ® N20<br />
Rheology control<br />
Anti-sagging<br />
Thickening<br />
Thixotropy<br />
Anti-settling<br />
Improved suspension<br />
Rheology control<br />
Anti-sagging<br />
Thickening<br />
Thixotropy<br />
Anti-settling<br />
Improved suspension<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
Clear solution<br />
75% solids in Xylene<br />
Low viscosity<br />
Density @ 25 o C:<br />
1.11 g/ml<br />
Clear, colorless to<br />
slightly yellow solution<br />
80% solids in Xylene<br />
Low viscosity<br />
Density @25 o C:<br />
1.15 g/ml<br />
Clear, colorless liquid<br />
98% solids<br />
Less than 2%<br />
residual solvent<br />
Very low viscosity<br />
Hydrophobic<br />
Silane treated<br />
100–140 m 2 /g<br />
Hydrophilic<br />
Untreated<br />
170–230 m 2 /g<br />
3
SOLVENT BORNE COATINGS<br />
MARKETS<br />
Special Purpose Coatings<br />
Industrial Maintenance,<br />
Architectural<br />
and Marine Coatings<br />
High Performance Corrosion<br />
Resistant Coatings<br />
Corrosion Resistant Coatings<br />
Oil Drilling Platforms<br />
Ships; Boats; Barges;<br />
Platforms; Bridges<br />
Exterior of Water and<br />
Chemical Storage Tanks<br />
Petrochemical and Chemical<br />
Plants; Power Plants<br />
Secondary Containment<br />
Floors; Locomotives;<br />
Rail Cars<br />
Rheology Control Additives<br />
Sag Control for<br />
High Solids Coatings<br />
Anti-settling<br />
Thickening to Paint<br />
and Coatings<br />
Improved Suspension<br />
FEATURES AND USES<br />
Unique glycidoxy functional<br />
silicone polymer — high<br />
epoxy functionality<br />
Binder to improve UV and<br />
corrosion resistance<br />
of two component<br />
coating formulations<br />
High solids coatings<br />
Solvent-free exterior<br />
durable coatings<br />
Binder for zinc-rich ethyl<br />
silicate paints<br />
Binder for refractory fillers<br />
Properly formulated<br />
systems provide:<br />
• Corrosion resistance —<br />
condensation conditions<br />
of 38°C for 2000 hours<br />
(ASTM D 2247)<br />
• Salt spray resistance —<br />
2000 hours (ASTM B 117)<br />
Ideal for high humidity,<br />
low temperature or<br />
very high temperature<br />
application conditions<br />
Silane treated hydrophobic<br />
fumed silica<br />
Use when moderate level<br />
of thixotropy coupled with<br />
hydrophobicity is desired<br />
Untreated hydrophilic<br />
fumed silica<br />
All purpose hydrophilic<br />
fumed silica<br />
Provides thixotropic<br />
properties to coatings<br />
PRODUCT<br />
SILICONE RESINS INDUSTRIAL MAINTENANCE & MARINE COATINGS<br />
SILRES ® HP 1000<br />
KEY ADVANTAGES<br />
Room temperature curable<br />
Low film shrinkage<br />
Excellent chemical<br />
resistance<br />
Provides resistance<br />
to hydrolysis<br />
Formulating flexibility<br />
Excellent UV and<br />
corrosion resistance<br />
ETHYL SILICATE FOR ZINC RICH PAINTS<br />
Ethyl Silicate<br />
TES 40<br />
Fast curing under extreme<br />
conditions (-15 to +50°C<br />
with 25–100% relative<br />
humidity)<br />
Long-term resistance<br />
up to 420°C<br />
Excellent protection against<br />
rust migration plus a<br />
self-sealing effect<br />
Easy to weld<br />
Very good adhesion to<br />
clean substrates<br />
Resistant to nearly<br />
all chemicals<br />
Overpaintable with all normal<br />
paints — alkali-free films<br />
Shock resistant under<br />
variable temperatures<br />
FUMED SILICA AS RHEOLOGY MODIFIERS FOR SOLVENT BORNE COATINGS<br />
HDK ® H15<br />
HDK ® N20<br />
Rheology control<br />
Anti-sagging<br />
Thickening<br />
Thixotropy<br />
Anti-settling<br />
Improved suspension<br />
Rheology control<br />
Anti-sagging<br />
Thickening<br />
Thixotropy<br />
Anti-settling<br />
Improved suspension<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
Clear, light amber liquid<br />
100% active<br />
Viscosity @ 25°C:<br />
25–40 cS<br />
Density at 25°C:<br />
1.13 g/ml<br />
Flash point<br />
ASTM D-56:<br />
131°F<br />
Weight per epoxy<br />
equivalents: 330-350 g<br />
Clear liquid<br />
(APHA color number<br />
below 30)<br />
Density at 25°C:<br />
1.055–1.065 g/ml<br />
SiO 2 content<br />
41–42% w/w<br />
Refractive index @ 25°C:<br />
1.396–1.398<br />
Acid content (as HCI):<br />
below 10 ppm<br />
Flash point (DIN 51755):<br />
greater than 41°C<br />
Hydrophobic<br />
Silane treated<br />
100–140 m 2 /g<br />
Hydrophilic<br />
Untreated<br />
170–230 m 2 /g<br />
4
WATER BORNE COATINGS<br />
MARKETS<br />
OEM<br />
General Industrial<br />
Coatings<br />
Heat Resistant Water Borne<br />
Coatings and Paints<br />
Barbecue Grills<br />
Fireplace Inserts<br />
Mufflers<br />
Smoke Stacks<br />
Engine Block<br />
Appliances<br />
General Metal Finishes<br />
Appliance Coatings<br />
Miscellaneous OEM<br />
Auto Metal Parts<br />
MARKETS<br />
Reactive Silicone for<br />
Production of<br />
Silicone Modified Polyester,<br />
Acrylic or Epoxy Systems<br />
FEATURES AND USES<br />
Methyl phenyl<br />
silicone resin emulsion<br />
Dual purpose: sole binder<br />
and blending with<br />
other organic binders<br />
Use in medium hard coatings<br />
Methyl silicone resin<br />
emulsion<br />
Dual purpose: sole binder<br />
and blending with<br />
other organic binders<br />
Use in medium hard coatings<br />
SILICONE INTERMEDIATES FOR RESIN SYNTHESIS<br />
FEATURES AND USES<br />
Reactive phenyl silicone<br />
resin intermediate —<br />
hydroxyl functionality<br />
Production of silicone<br />
modified polymers for<br />
coil coatings, exterior<br />
building products,<br />
general metal finishes<br />
and appliance coatings<br />
Hydroxyl functional<br />
resin compatible<br />
Reactive methyl phenyl<br />
silicone resin intermediate<br />
— methoxy functionality<br />
Production of silicone<br />
modified saturated polyster<br />
having 25 to 50%<br />
silicone content<br />
Hydroxyl functional<br />
resin compatible<br />
PRODUCT<br />
PRODUCT<br />
KEY ADVANTAGES<br />
SILICONE INTERMEDIATES FOR CO-POLYMERIZATION WITH OTHER RESINS<br />
SILRES ® IC 836<br />
SILRES ® SY 231<br />
Contributes to superb<br />
exterior weathering, heat<br />
resistance, soil resistance<br />
(i.e. solid pick-up) and<br />
hardness properties to<br />
silicone modified systems<br />
Provides film flexibility<br />
Easy handling<br />
Contributes to excellent<br />
gloss retention, superb<br />
chalk resistance and<br />
resistance to thermal<br />
stresses<br />
Narrow molecular weight<br />
distribution combined<br />
with low average<br />
molecular weight allow<br />
for copolymers virtually<br />
free of unreacted silicone<br />
S I L R E S ® R E S I N S<br />
SILICONE RESINS EMULSIONS FOR GENERAL INDUSTRIAL OEM WATER BORNE COATINGS<br />
SILRES ® MP 42 E<br />
SILRES ® M 50 E<br />
KEY ADVANTAGES<br />
Air-drying in blends<br />
Resists temperatures<br />
to 650°C<br />
Excellent compatibility<br />
Air-drying in blends<br />
Resists temperatures<br />
to 600°C<br />
Excellent compatibility<br />
Useful in VOC<br />
compliant coatings<br />
PROPERTIES<br />
Non ionic emulsion<br />
42% solids<br />
7% xylene<br />
Density @ 25°C:<br />
1.07 g/ml<br />
Non ionic emulsion<br />
52% solids<br />
Virtually solvent free —<br />
less than 1% solvent<br />
Density @ 25°C:<br />
1.04 g/ml<br />
PROPERTIES<br />
Clear, solid flakes<br />
Hydroxyl content:<br />
3.0–4.5 %<br />
Thermal decomposition:<br />
Greater than 250°C<br />
Softening point:<br />
65–85°C<br />
Average molecular weight:<br />
1700<br />
Clear, light<br />
straw-colored liquid<br />
Solvent free<br />
Viscosity @ 25°C:<br />
100–150 cS<br />
Density @ 25°C:<br />
1.14 g/ml<br />
Refractive index at 25°C:<br />
1.500–1.505<br />
Volatiles: 2% by weight<br />
Weight per alkoxy<br />
equivalents: 222 g<br />
5
CONSTRUCTION CHEMICALS AND BUILDING PRODUCTS<br />
MARKETS<br />
In-Plant Application<br />
Brick; Stucco; Concrete;<br />
Aerated Concrete;<br />
Fiber/Cement Board<br />
Low-fired Clay Materials:<br />
Roof Tiles, Facing Bricks,<br />
Floor Tiles, Flower Pots<br />
Immediately<br />
After Production<br />
Gypsum and<br />
Gypsum-based<br />
Plasterboards<br />
Light Fillers: Perlite,<br />
Vermiculite and Aerated<br />
Concrete Granules and<br />
Insulating Materials<br />
In Plant Application<br />
Lightweight Aggregates,<br />
Clay Building Materials,<br />
Aerated Concrete, Brick,<br />
Fibrous Cement and<br />
Mineral Fibers<br />
Professional and<br />
“Do-It-Yourself”<br />
Application Above Grade<br />
Absorbent Minerals, Alkaline<br />
Substrates, Natural Stone,<br />
Brick, Concrete, Mineral<br />
Paints and Stucco<br />
“Do-It-Yourself”<br />
Application Above Grade<br />
Mineral Materials,<br />
Architectural Concrete;<br />
Concrete Block; Exposed<br />
Aggregate Concrete;<br />
Split Face Block; Pavers;<br />
Stucco; Porous and Dense<br />
Brick; Clay Tile<br />
FEATURES AND USES<br />
Potassium methyl<br />
siliconate concentrate<br />
Imparts water repellency to<br />
mineral-based<br />
construction materials<br />
Reduces water absorption<br />
Water vapor permeable<br />
Provides good<br />
material penetration<br />
Protects mortar and grout<br />
Not recommended for dark<br />
dense substrates, polished<br />
or glazed materials or<br />
exterior walls of a building<br />
Self emulsifying silane/silicone<br />
microemulsion concentrate<br />
Imparts water repellency<br />
Water vapor permeable<br />
Provides excellent material<br />
penetration — microemulsion<br />
Provides excellent<br />
beading characteristics<br />
Excellent high alkaline<br />
material stability<br />
leading to long term<br />
coating-on-material durability<br />
Primer for architectural<br />
coatings such as WACKER<br />
SREP ® systems and Exterior<br />
Insulation Finish Systems (EIFS)<br />
Silane/silicone<br />
emulsion concentrate<br />
Imparts excellent<br />
water repellency<br />
Water vapor permeable<br />
Reduces water absorption<br />
Provides good material<br />
penetration<br />
Provides excellent<br />
beading characteristics<br />
Excellent stability on<br />
highly alkaline materials<br />
leading to long term<br />
coating-on-material durabliity<br />
Particularly suited for<br />
“Do-It-Yourself” above grade<br />
PRODUCT<br />
KEY ADVANTAGES<br />
WATER DILUTABLE SILICONE WATER REPELLENTS FOR MASONRY<br />
SILRES ® BS 16<br />
SILRES ® BS 1311<br />
SILRES ® BS 1001A<br />
Zero VOC<br />
Non-flammable<br />
No solvent odor<br />
Dilutable w/ tap water<br />
Application by airless<br />
spraying, brushing or dipping<br />
Spontaneously emulsifies<br />
to microemulsion upon<br />
water addition<br />
Dilution stable<br />
Low VOC on curing<br />
Minimizes material<br />
darkening<br />
Application by airless<br />
spraying, brushing or dipping<br />
Easily water dilutable<br />
to processing solids<br />
recommendations<br />
Superior long term dilution<br />
and storage stability — all<br />
features retained<br />
Application by airless<br />
spraying, brushing or dipping<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
Clear to hazy,<br />
colorless dispersion<br />
54% solids in water<br />
34% active<br />
Density @ 25°C:<br />
1.4 g/ml<br />
pH: 13<br />
Reddish to yellowish liquid<br />
100% active<br />
Density @ 25°C:<br />
0.95 g/ml<br />
White, opaque water<br />
based emulsion<br />
50% active<br />
VOC: 303 g/liter<br />
Density @ 25°C:<br />
0.95 g/ml<br />
pH: 8<br />
6
CONSTRUCTION CHEMICALS AND BUILDING PRODUCTS<br />
MARKETS<br />
Professional Application<br />
Above Grade<br />
Mineral Materials:<br />
Architectural Concrete;<br />
Concrete Block; Exposed<br />
Aggregate Concrete; Split<br />
Face Block; Pavers; Stucco;<br />
Clay Tile; Porous and<br />
Dense Brick<br />
Facade Treatment<br />
Exterior Insulation Finish<br />
Systems (EIFS); Stucco<br />
Professional Application<br />
Above Grade<br />
Mineral Substrates<br />
Natural Stone<br />
In-Plant Application<br />
Roofing Granules<br />
Professional and<br />
“Do-It-Yourself”<br />
Applications Above Grade<br />
Brickwork<br />
Mineral-based Natural and<br />
Artificial Stone<br />
Aerated Concrete<br />
Sand-lime Brickwork<br />
Cement Fiberboards<br />
Mineral Paints<br />
Various Types of Concrete<br />
Mineral Plasters<br />
Professional Application<br />
Above Grade<br />
Applicable to a Wide Variety<br />
of Concrete, Architectural<br />
Concrete, and<br />
Reinforced Concrete<br />
Department of<br />
Transportation (DOT)<br />
Above Grade<br />
Parking/Bridge Deck<br />
(Concrete) Treatments<br />
FEATURES AND USES<br />
Silane/silicone emulsion concentrate<br />
Imparts excellent water repellency<br />
Water vapor permeable<br />
Reduces water absorption<br />
Provides good material penetration<br />
Excellent stability on highly alkaline<br />
materials leading to long term<br />
coating-on-material durability<br />
Particularly suited for<br />
commercial applications where<br />
high water repellency is desired<br />
Suitable for primer applications<br />
Reactive silicone having<br />
alkoxy functionality<br />
Primarily for commercial<br />
applications where high<br />
water repellency is desired<br />
Promotes adhesion of roofing<br />
granules to asphalt underlayment<br />
Water vapor permeable<br />
Reduces water absorption<br />
Provides good material penetration<br />
Stable to highly alkaline materials<br />
Silane/silicone polymer<br />
Imparts water repellency to<br />
absorbent, porous, mineral<br />
construction materials including<br />
alkaline based materials<br />
Provides good depth of<br />
penetration and fast<br />
tack free times<br />
Primer for paints, architectural<br />
coatings such as WACKER<br />
SREP ® systems, and Exterior<br />
Insulation Finish Systems (EIFS)<br />
Specialty silane<br />
For commercial applications<br />
requiring high water repellency<br />
and excellent depth of penetration<br />
under extreme abrasion<br />
conditions, over multiple years<br />
Imparts water repellency to<br />
absorbent, porous, mineral<br />
construction materials including<br />
alkaline based materials<br />
PRODUCT<br />
SILRES ® BS 2001<br />
SILRES ® BS 68<br />
SILRES ® BS 290<br />
SILRES ® BS 1316<br />
KEY ADVANTAGES<br />
WATER DILUTABLE SILICONE WATER REPELLENTS FOR MASONRY<br />
Easily water dilutable<br />
to processing solids<br />
recommendation<br />
Application by airless<br />
spraying, brushing or dipping<br />
SOLVENT DILUTABLE SILICONE WATER REPELLENTS FOR MASONRY<br />
Solvent dilutable<br />
Catalyzed for<br />
tack-free drying<br />
Solvent dilutable<br />
Application by airless<br />
spraying, brushing<br />
or dipping<br />
Quickly develops water<br />
repellency characteristics,<br />
after application<br />
Can be applied to<br />
damp materials<br />
Solvent dilutable<br />
Can be applied to<br />
damp materials<br />
Low volatility allows more<br />
silane to be retained in<br />
the concrete<br />
Reduces water and chloride<br />
abdorption by above<br />
grade concrete<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
White, opaque water based<br />
emulsion<br />
50% active<br />
VOC: 306 g/liter<br />
Density @ 25°C:<br />
.95 g/ml<br />
pH: 8<br />
Clear, colorless to slightly<br />
yellow liquid<br />
98% active<br />
Density @ 25°C:<br />
1.03 g/ml<br />
Opaque, colorless to light<br />
yellow liquid<br />
100% active<br />
VOC: 153 g/liter<br />
Density @ 25°C:<br />
1.05 g/ml<br />
Clear, colorless liquid<br />
100% active<br />
VOC: 228 g/liter<br />
Density @ 25°C:<br />
0.90 g/ml<br />
7
CONSTRUCTION CHEMICALS AND BUILDING PRODUCTS<br />
MARKETS<br />
Professional Application<br />
Above Grade – DOT<br />
Specialty Water Repellent for<br />
Vertical and Overhead<br />
Concrete, Architectural<br />
Concrete and<br />
Reinforced Concrete<br />
Parking/Bridge<br />
Deck (Concrete)<br />
ARCHITECTURAL AND DECORATIVE COATINGS<br />
MARKETS<br />
Primer for<br />
Architectural Coatings<br />
Mineral Based Materials<br />
Architectural Concrete<br />
Concrete Block<br />
Exposed Aggregate Concrete<br />
Splitface Block<br />
Façade Treatment<br />
Stucco<br />
Exterior Insulating Finish<br />
Systems (EIFS)<br />
Primer for<br />
Architectural Coatings<br />
Mineral Substrates<br />
Architectural Concrete<br />
Concrete Block<br />
Exposed Aggregate<br />
Concrete<br />
Splitface Block<br />
Façade Treatment<br />
Stucco, Exterior Insulating<br />
Finish Systems (EIFS)<br />
FEATURES AND USES<br />
Silane crème<br />
Suitable for all types<br />
of concrete<br />
Thixotropic crème<br />
that can be applied without<br />
loss of material<br />
Up to 300 g/m 2 may be<br />
applied in one operation to<br />
materials in horizontal, vertical<br />
or overhead configuration<br />
Excellent penetration into<br />
high-quality concrete<br />
and reinforced concrete<br />
(or other alkaline materials)<br />
without loss of stability<br />
Dramatic reduction in<br />
chloride and water absorption<br />
FEATURES AND USES<br />
Silane/silicone emulsion<br />
Suitable as a primer<br />
for architectural coatings<br />
Water vapor permeable<br />
Good stability on highly<br />
alkaline materials for long<br />
term durability<br />
Most effectively reduces<br />
cracking, spalling, freeze/<br />
thaw damage, chemical<br />
degradation, biological growth,<br />
efflorescence, dirt pickup<br />
Silane/silicone polymer<br />
Suitable as a primer for<br />
architectural coatings<br />
Effective in commercial<br />
applications for impregnating<br />
and priming mineral and<br />
highly alkaline materials<br />
Provides high<br />
water repellency<br />
Prevents rising damp<br />
through cement walls<br />
Provides good depth of<br />
penetration and fast tack<br />
free times<br />
PRODUCT<br />
KEY ADVANTAGES<br />
USE AS SUPPLIED — SILICONE WATER REPELLENTS FOR MASONRY<br />
SILRES ® BS Crème C<br />
PRODUCT<br />
SILRES ® BS 2001<br />
SILRES ® BS 290<br />
Environmentally compatible<br />
Low volatility<br />
Alberta DOT approved for<br />
Type 1B sealers at 222ft 2 /gal<br />
Apply undiluted — best<br />
applied using airless spray.<br />
Brushes, rollers and spatulas<br />
can be used for small or<br />
confined areas.<br />
Good depth of penetration<br />
due to extended surface<br />
contact time<br />
Provides protection against<br />
frost/road salt attack<br />
Provides good adhesion<br />
for paints<br />
KEY ADVANTAGES<br />
Water reducible<br />
Applicatioin by airless<br />
spraying, brushing<br />
or dipping<br />
Physically and chemically<br />
bonds to coated materials<br />
Formulated to minimize<br />
material darkening<br />
Solvent dilutable<br />
Excellent water beading<br />
Recoatible with paints<br />
Application by airless<br />
spraying, brushing<br />
or dipping<br />
Quickly develops water<br />
repellency characteristics,<br />
after application<br />
Can be applied to<br />
damp materials<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
White, opaque cream<br />
80% active<br />
Density @ 25°C:<br />
0.90 g/ml<br />
VOC: 329 g/liter<br />
pH: 8<br />
PROPERTIES<br />
White, opaque water<br />
based emulsion<br />
50% active<br />
Density @ 25°C:<br />
0.95 g/ml<br />
VOC: 306 g/liter<br />
pH: 8<br />
Opaque, colorless to light<br />
yellow liquid<br />
100% active<br />
VOC:153 g/liter<br />
Density @ 25°C:<br />
1.05 g/ml<br />
8
ARCHITECTURAL AND DECORATIVE COATINGS<br />
MARKETS<br />
Exterior Durable Coatings<br />
High Performance Silicone<br />
Resin Emulsion Paints<br />
— WACKER SREP ®<br />
Additive for<br />
Exterior Masonry or<br />
Wood Sealer, Stain,<br />
Paint, Coating or<br />
Primer Formulations<br />
FEATURES AND USES<br />
Silicone resin emulsion<br />
Binder component in silicone<br />
resin emulsion paint<br />
(WACKER SREP ® system)<br />
Provides excellent water<br />
repellency and high water<br />
vapor permeability<br />
Good stability on highly<br />
alkaline materials for long<br />
term durability<br />
Low VOC emissions on<br />
curing; EPA compliant<br />
Silicone resin emulsion<br />
Provides water repellency,<br />
water permeability and long<br />
term beading effects as<br />
a blending additive<br />
Not designed for use<br />
on its own<br />
PRODUCT<br />
SILRES ® BS 45<br />
SILRES ® BS 1306<br />
KEY ADVANTAGES<br />
Water dilutable/dispersible<br />
UV stable<br />
Resistant to biological attack<br />
Retains color and<br />
weathers well<br />
Excellent water beading when<br />
used in conjunction with<br />
SILRES ® BS 1306<br />
Resists cracking, peeling<br />
and blistering for<br />
improved longevity<br />
Recoatable<br />
Water dilutable/dispersible<br />
UV stable<br />
Resistant to acid rain<br />
Resistant to<br />
microorganisms/bacteria<br />
Imparts water beading and<br />
water repellency at low levels<br />
from 0.5% to 1.5% based on<br />
total formula weight<br />
S I L R E S ® R E S I N S<br />
PROPERTIES<br />
White, opaque water based<br />
emulsion<br />
50% active<br />
Density @ 25°C:<br />
1.09 g/ml<br />
VOC: 121 g/liter<br />
pH: 5<br />
White, opaque water<br />
based emulsion<br />
50% active<br />
Density @ 25°C:<br />
1.0 g/ml<br />
VOC: 60 g/liter<br />
Because we cannot foresee or control the varied conditions under which this information and our materials may be used, we do not guarantee the<br />
applicability or accuracy of this information or the suitability of our materials in any specific situation. Samples are provided and users should make their<br />
own tests to determine the suitability of our materials for their specific purposes. These materials are provided without warranty, either expressed or<br />
implied for fitness for a specific purpose, and nothing herein shall be construed as a recommendation for uses that infringe valid patents or as extending<br />
a license under valid patents.<br />
© Wacker Chemical Corporation, February 2005.<br />
pH: 7<br />
9
‐ Notes ‐
<strong>Brenntag</strong> <strong>Specialties</strong>, <strong>Inc</strong>. Local Offices<br />
Northeast:<br />
1000 Coolidge Street<br />
South Plainfield, NJ 07080<br />
800-732-0562<br />
800-833-8139 (Fax-General)<br />
5700 Tacony Street<br />
Philadelphia, PA 19135<br />
800-423-7423<br />
800-864-9824 (Fax)<br />
Southeast:<br />
6525 The Corners Parkway<br />
Suite 208<br />
Norcross, GA 30092<br />
800-833-8142<br />
800-833-8143 (Fax)<br />
Midwest:<br />
24119 W. Riverwalk Court<br />
Unit 145<br />
Plainfield, IL 60544<br />
800-833-8140<br />
800-833-8141 (Fax)<br />
Lower Midwest:<br />
15710 JFK Boulevard<br />
Suite 260<br />
Houston, TX 77032<br />
800-627-2436<br />
877-796-7257 (Fax)<br />
Southwest:<br />
15710 JFK Boulevard<br />
Suite 260<br />
Houston, TX 77032<br />
800-627-2436<br />
877-796-7257 (Fax)<br />
West:<br />
One Camino Sobrante<br />
Suite 215<br />
Orinda, CA 94563<br />
800-227-1345<br />
925-253-9601 (Fax)<br />
www.brenntagspecialties.com<br />
E-Mail:<br />
specialties@brenntag.com