Aircraftspruce & Specialty Co.

2006_555-562.qxd 6/28/06 12:08 PM Page 561
ULLMAN MAGNETIC PICK-UP TOOLS
These Ullman pick-up tools with
Powercap offer a unique combination of
features which make them ideal for
HT-1
work around aircraft. The stainless steel
telescoping handle is strong, long, and
lightweight, and the comfortable, textured
cushion grip keeps handle secure
HT-2
even in wet or oily hands. The head features
a compact industrial strength
magnet for retrieving heavy objects in
tight places. The powercap shields
magnet side so that the head can be
HT-3
easily guided past ferrous metal
objects. Available in 3 convenient sizes.
HT-1 lifts 1-1/2 lbs, over 2 lbs with POWERCAP telescopes
from 6-5/8” to 33-1/4” P/N 12-21385............$8.95
HT-2 lifts 3-1/2 lbs, over 5 lbs with POWERCAP telescopes
from 6-5/8” to 33-1/4” P/N 12-21386..........$10.30
HT-3 lifts 5 lbs, 10 lbs with POWERCAP telescopes from 6-3/4”
to 30-1/4” P/N 12-21387..........$13.40
CHP4-L Hook & Pick Set - has picks
that are 9.75” long with textured cushion
grips. These longer picks are ideal
for working in hard to reach awkward
areas. P/N 12-00716 ..........$11.40
MSR-3 MegaMag Socket Rack - has a
strong magnet on the front of the racks that keeps 1/4”, 3/8” & 1/2”
drive sockets together, organized and ready to use. The magnetic
force on the back holds the rack loaded with sockets to most flat
metal surfaces. P/N 12-00717............$8.95
GMC-2 Dual Purpose Tool - contains a
MegaMag Pickup Tool that lifts 16 lbs.
and a 2.25” Inspection Mirror with a
metal base that mounts in seconds
and brings hidden areas into full view.
P/N 12-00718..........$15.50
EXHAUST PORT RESURFACING TOOL
The exhaust port resurfacing tool is
designed to recondition port surfaces
where no more than .010” of material
need to be removed. It is easily bracketed
and aligned to the port in reference to
the rocker cover surface. Execution of
the cutting operation only requires hand power. No air or electrical
power is required. Mounting bracket adapters are available
for the following engines: A&C series continentals, Lycoming
Parallel Valve, Lycoming Angle Valve, others on request
..................................................P/N 12-17605 ........$298.75
A& C Series Continental BracketP/N 12-17609 ........$149.00
Lycoming Parallel Valve Bracket P/N 12-17610 ........$149.00
Lycoming Angle Valve Bracket ....P/N 12-17611 ........$163.95
Cutter Head Inserts ....................P/N 12-17607 ..........$19.00
EAR ISLAND REMOVAL TOOL – When substantial quantities of material
have to be removed from the exhaust port, it may be necessary
to also remove the island around the exhaust stud area.
The ear island removal tool and pilot can be used to accomplish
this without the use of power tools. P/N 12-17608 ..........$73.50
SPECIALTY TOOLS
561
HANDY MAG RETRIEVAL TOOL
The Handy Mag is the size of a pen and can be carried in a
shirt pocket. It telescopes out to an extended length of 32” and
the magnet on the tip can pick up objects over 2 lbs. Excellent for
retrieving dropped tools or parts in engine compartments or other
unreachable areas. Tough stainless steel body.
P/N 12-14550 ......$5.85/ea
EXHAUST DESICCATOR PLUGS
FOR EXHAUST STACKS
Quality made polyurethane rubber plug won't wear
out and provides a positive seal in the exhaust pipe.
Desiccator housing contains interchangeable desiccator
canisters. Desiccant never needs to be
removed from canister for drying. Removal flag and
cap attach to external end of plug when in use.
During storage, flag cap fits on desiccator chamber.
Limits internal engine damage caused by corrosion. Fits 2” dia. exhaust pipes.
Other sizes available as a special order. Minimum special order 5 pieces.
P/N 12-30212....$31.70 ea.
HIGH CAPACITY EXHAUST DESICCATOR
2.5 times the desiccant capacity of previous design,
One piece construction allows the dessicant to be
contained in the core of the plug. Made of durable
high quality urethane rubber that will last almost
indefinitely
P/N 12-01057 ......$5.85/ea
GOLDENROD DEHUMIDIFIER
This compact, low-voltage dehumidifier is an ideal way to eliminate dampness
and mildew in aircraft which can cause mildew growth in carpet and upholstery
and wreak havoc with electrical systems. In stall
under the instrument panel or on the deck between
seats. If installed in the engine compartment, Goldenrod
will eliminate moisture which leads to rust, keep ignition
wiring dry, and facilitate cold weather starts. In the hangar,
Goldenrod can protect parts, tools, supplies, and components.
Operates on standard 110V current 24 hours per day but uses four
times less power than a standard light bulb. Safe and effective. Available
in four lengths.
Part No. Length Watts
Approx. Coverage
Up To Price Ea.
12-30225 12" 8 100 cubic feet $39.50
12-30230 18" 12 200 cubic feet $42.50
12-30235 24" 15 300 cubic feet $45.00
12-30240 36" 25 500 cubic feet $47.95
LYCOMING BAFFLE SPRING COMPRESSOR
Our top quality Lycoming Baffle
Spring Compressor speeds up the
removal and installation of cylinder
baffle springs. It eliminates the danger
of broken or bent cylinder fins caused by use of screwdrivers and punches.
This tool is easy to use and features two pivot locations for parallel and angle
valve cylinders. P/N 12-30200..........$47.30
LAP JOINT JOGGLE TOOL
FOR UP TO .032 ALUMINUM SHEET
To use the Lap Joint Joggle Tool, install
washers to adjust joggle set-back from
edge of sheet. Start at one end of sheet and
pull smoothly along edge to be joggled.
Keep back plate of tool firmly and squarely
against edge of sheet for smooth and parallel
joggle. To break a sheet edge, insert sheet just one bearing depth (.4”) then
bend down as desired as tool is pulled along edge. Adjustments - For set-back,
add or subtract washers. For different material thickness, loosen bolts, spread
or close. For use on aluminum sheet up to .032 thickness.
P/N 12-30275 ........$33.30
NON-CONTAMINATING SCRAPER
Our Non-Contamination Scraper is suitable
for all airframe scraping operations. It will
not contaminate delicate aluminum parts
with steel particles which can induce corrosion.
It is easily resharpened with a mill file
and the .060" thick heat treated aluminum blade is easily replaceable. Features
positive wood grip handle. P/N 12-30205 ........$14.00
AIRCRAFT SPRUCE WEST AIRCRAFT SPRUCE EAST
CORONA, CA • (877) 4-SPRUCE Prices Subject to Change Without Notice
PEACHTREE CITY, GA • (877) 477-7823
CM
WP
ME
HA
AP
LG
EP
CS
IN
EL
AV
TO
TO
BV
BV