Aircraftspruce & Specialty Co.

2006_574-593.qxd 6/28/06 12:55 PM Page 588
CM
WP
ME
HA
AP
LG
EP
CS
IN
EL
AV
TO
TO
BV
VISION GUARDIAN WELDING HELMETS
WELDING HELMET - Features: •
Conforms to ANSI Z87.1, CE EN169 & EN379 •
Splatter Guard Replacement Filters: Part no.
383HSF • Weight: 1.4 lbs. • Solar powered to
recharge batteries • Multiple light sensors •
Panel size: 4.5”x 5.25”x .28” (114 x 136 x 7mm)
• Viewing area: 2.4”x 3.8” (9.12 sq. in.) • Outer
shade adjustment knob - Light state: Shade 4;
Dark state: Shades 9, 10, 11, 12, 13 • External
access battery drawer: 2pc 3V CR2032 lithium
batt. (incl.)
P/N 12-01034 ........$206.50
WELDING HELMET - Features: • Conforms to
ANSI Z87.1, CE EN169 and EN379 • Splatter
Guard Replacement Filters: Part no. 383KSF •
Weight: 1.4 lbs. • Solar powered to recharge
batteries • Multiple light sensors •Panel size:
3.5”x 4.3”x .275” (90x110mm) • Viewing area:
1.6”x 3.8” • Outer shade adjustment knob - Light
state: Shade 4; Dark state: Shades 9, 10, 11,
12, 13 • External access battery drawer: 2pc 3V
CR2032 lithium battery included.
P/N 12-01035 ........$135.60
WELDING EQUIPMENT
WELDING HELMET - Features: • Conforms to
ANSI Z87.1 • Splatter Guard Replacement
Filters: Part no. 383CSF • Weight: 1.6 lbs. •
Multiple light sensors • Panel size: 2.125”x
4.25” (53x107mm) • Viewing area: 1”x 3.625”
(25x92mm) • Shade adjustment (internal) -
Light state: Shade 4; Dark state: Shades 10, 11,
12 • Internal access battery drawer: 2pc 3V
CR2032 lithium batt. (incl.)
P/N 12-01036 ..........$99.85
HENROB 2000 IV
WELDING TORCH
The revolutionary design of the
Henrob 2000 Torch makes it the
ideal welding torch for aircraft construction.
The Henrob 2000 allows
less oxidation. minimal flux,
reduced pressures and substantial
materials savings. Fewer tips are
required and hose fatigue is lessened.
Perfect for steel and aluminum
welding and cutting. Highly
recommended by many aircraft
builders. Formerly known as the
Dillon Mark III.
..........P/N 12-16000........$489.00
Henrob Instructional Video......................P/N 12-05150..........$16.95
PORTASOL CORDLESS
BUTANE SOLDERING TOOL KIT
The Portasol Soldering Tool Kit
contains four different tools.
Simple tip/accessory installation
allows you to convert into a soldering
iron, blow torch, hot blower or
hot knife within seconds. Ideal for
aircraft, automotive, marine and
home use. The hot knife will quickly
cut and seal repairs on dacron,
mylar and nylon. The soldering
iron is ideal for working on electronics and avionics. Portasol is lightweight
and fits easily in a tool box. Features cordless, go-anywhere
versatility, 90 minute continuous use capacity, refills in 20 seconds
with standard butane lighter fuel, and full 2 year warranty. Kit
includes Portasol soldering tool with 2.4 MM tip, hot knife, blow torch,
hot blower, cleaning sponge, safety stand and rugged plastic storage
case. ......................................P/N 12-20600 ................$49.95
588
SMITH WELDING
OPTIONAL EQUIPMENT
TWO-STAGE REGULATORS - For the professional.
Heavy duty, w/check valves.
H1421A-510 for Acetylene, 0-15 PSI
............................P/N H1621A-510 ..$158.95
CUTTING TORCH - Fits ASl torch body with cutting
capacity up to 3" steel.
Head Angle 90° ........P/N AC309........$119.95
CUTTING TIP - Use in AC305 and AC309 assemblies.
MC-12-0 (Cutting Range 3/16" - 3/8")
Smaller and larger tips available, from AW2000
for very light metal (to 1/32") to AW210 for
1/2". ....................PP/N MC-12-0 ........$14.60
HUNTSMAN FACE SHIELD - A very practical protective
head gear when doing light gas welding. Dark
green plastic window 8" x 11-1/2" snaps onto lightweight
plastic adjustable headband. Permits full
peripheral vision during work. Protects against radiation
- flip up visor when not in service.
Headband - Model K............................P/N 12-05000 ............$9.00
Visor ....................................................P/N 8124D ................$4.90
Complete Shield ..................................P/N 12-05100 ..........$13.90
HUNTSMAN ELECTRONIC WELDING HELMET
Call for prices and information on the new Huntsman Autoview
Welding Filters which provide uncompromising eye protection.
WELDVIEW GOGGLE - For heavy duty work and
full protection against radiation and impact in
gas welding, cutting, burning and brazing.
Soft opaque green mask. Can be worn over
personal glasses. Glass cover plate and
Filterweld plate supplied. Meets requirements
of American National Stds. Inst. (ANSI)
Standard Z87.1. P/N 12-04910 ..........$11.90
TIP CLEANER SET - 13 cleaners for #49 - #75 drill size orifices.
..............................................................P/N N250 ..................$9.20
SINGLE STAGE REGULATORS
(1) H1710A-540 for Oxygen, 0-100 PSI P/N 12-19300 ..........$88.00
(1) H1721A-510 for Acetylene, 0-15 PSI P/N 12-19400 ..........$86.00
TORCH BODY - Designed to handle light
duty welding and fabricating. Compact
size provides easy handling even in confined
areas. Needle valves located at
front end for easy one-hand flame adjustment. Inlet connections 3/8"-
24 right & left hand, fit “A” size hose nuts.
..............................................................P/N AW1..................$97.75
Five Light Duty Welding Tips:
For Metal Thickness Up To
1/32" ................AW201 ....................$27.70
1/2” ..................AW203 ....................$27.60
3/32" ................AW204 ....................$26.00
1/8" ..................AW205 ....................$27.60
One Single Flint Lighter
........................P/N N113-A ..............$3.60
Box of Six Extra Flints for Lighter P/N N113-3
$3.45
Twin Hose, 12-1/2 Ft. (3/16" I.D.)................P/N RA921 ................$8.00
One Pair American Optical Weldview Goggles P/N 91225 ..........$10.95
AIRCRAFT SPRUCE WEST AIRCRAFT SPRUCE EAST
CORONA, CA • (877) 4-SPRUCE Prices Subject to Change Without Notice
PEACHTREE CITY, GA • (877) 477-7823