Aircraftspruce & Specialty Co.

2006_563-573.qxd 6/28/06 12:19 PM Page 571
QUICK GRIP BAR CLAMPS
From the makers of Vise-Grip tools comes the
amazing new Quick-Grip bar clamp. The
unique pistol-grip handle lets woodworkers
hold the clamp and adjust jaw pressure with
just one hand. One finger unlocks the Quickrelease
trigger. Features include positive locking
action to hold work tight, strong, lightweight
high-tech construction, instant adjustable
clamping pressure, large, pliable pads that won’t mar work, and a
variety of jaw openings. It will “single-handedly” change the way you
think about bar clamps!
Part Jaw Opening Price
No. Size (mm) Each
12-03910 6"/150 $18.60
12-03920 2"/305 $21.70
12-03930 18"/455 $22.70
SHEARS - NIBBLERS
Part No. Jaw Opening Price
No. Size (mm) Each
12-03940 24"/610 $34.10
12-03950 36"/915 $28.00
MICROMETER
For measurements of 0-1", with .001"
graduations. Precision-ground hard
steel faces. Direct-feel thimble with friction
stop and lock nut. Dull chrome finish throughout with black graduations.
Decimal equivalents on frame. Zero adjustment requires no
wrench. Guaranteed accuracy .0005. P/N MG-1001 ..........$59.25
LONG REACH PLIER KITS
(3) pieces for access into the most demanding
applications. Each plier has a full 11” reach.
Medium carbon steel, hardened, fully polished.
Cushion PVC handles. Leather storage
pouch. Model TP942.
P/N 12-00364..........$33.20
HOLE DUPLICATORS
(Drill Bushing Type)
Provide an accurate means of drilling duplicate matching holes in
over-lapping sheets. Hole to be duplicated is drilled though bushing
when pilot is in place. $10.60 ea
PART NO. PILOT & DRILL SIZE PART NO. PILOT & DRILL SIZE
AT532-61 #40 (.098”) AT532-63 #21 (.159”)
AT532-62 #30 (.129”) AT532-65 #10 (.194”)
DRILL STOPS
Lock on drill with set screw.
Regulate hole depth, cushion the
breakthrough. Eliminate surface
marks & reduce drill breakage.
#40 Drill ..P/N 12-08800....$0.95 #30 Drill....P/N 12-08900 ..$0.95
#28 Drill ..P/N 12-09000....$1.75 #21 Drill....P/N 12-09100 ..$0.95
#20 Drill ..P/N 12-09200....$0.96 #12 Drill....P/N 12-09300 ..$1.39
#10 Drill ..P/N 12-09400....$0.95 1/4” Drill....P/N 12-09500 ..$1.39
ANGLE DRILL
One of the smallest angle head
designs for close-quarter drilling operations.
Made in USA. Features: • 2800 rpm
• 90º angle head • Rear exhaust • 1/4” drilling
capacity • 59/64” angle head height • 1/4”-28 threaded
spindle • 12-5/8” length • 78DB
P/N 12-00241........$323.95
ADEL HAND “NIBBLING” TOOL
Cuts sheet metal like punch and die. Cuts
holes to any size and shape. Start with 7/16"
hole then “nibble” to size required. Capacity 18
Ga. steel. Wt. 8 oz.
..............................P/N 12-10400 ........$16.75
Replacement Punch................................P/N 12-10500..........$10.45
571
KETT PORTABLE POWER SHEARS
ELECTRIC MODEL K-200 – Extra-powerful
115V, 50/60 cycle AC/DC motor.
Heavy-duty bearings & die-cast aluminum
cutting head. Tool is UL and CSA
approved. 2300rpm. Maximum cutting
speed, 180 inches/minute. Wt. 5 lbs.
Over-all length, 11.75". Ampere rating,
2.2 amps. P/N K-200..............$269.95
ELECTRIC MODEL K-442 – Kett’s allpurpose
16 gauge power sheers cut up to
16 gauge mild steel, cleanly and easily,
without burring or buckling the material.
These lightweight shears, designed for
durability, feature a variable speed motor
and fill the gap between Kett’s light duty
and heavy duty power shears.
P/N K-442..............$319.95
PNEUMATIC MODEL P-500 – Equipped
with air-metering trigger for variablespeed
cutting, so that initially the blade
can be operated slowly to prevent chattering
at start of cut. 2600rpm. Maximum
cutting speed, 180" per min. Wt. 3 lbs.
Over-all length, 9".
P/N P-500..............$183.95
PNEUMATIC MODEL PN-1000 – This
new pneumatic shear is constructed of
lightweight aluminum and features a
push-lever variable speed control.
Compact, with a smooth, well-balanced
grip for one-handed maneuverability and
control. Requiring only a 90 PSI air
source, the PN-1000 delivers up to 2500
rpm. Cuts 18 Ga. mild steel, flat or corrugated
metal with ease. A real time saver.
P/N 1000 ..............$289.95
KB-301 CORDLESS 18GA SHEAR
Kett’s powerful 14.4 volt Cordless Shear
gives you complete freedom in the shop.
Its high torque 2300 SPM motor lets you
easily cut 18 gauge mild steel or up to 20
gauge stainless at over 150”/minute. The
swivel head gives you precise control as
you make straight or contour cuts. The
double-cut shearing action leaves a clean burr free edge and won’t
warp or bend the piece. The lightweight hi-impact thermoplastic
housing and aluminum cutting head keep weight down to only 7 lbs.
The extended run time NiCad battery recharges quickly and there’s
room for a spare, and the charger unit, in the handy carrying case.
Length: 12-3/4”, Weight: 7 lbs.
The kit includes the KB-301 power shear, KB-302 14.4 volt NiCad
High Performance battery. KB-303 battery charger and KB-304 carrying
case.
Model No. Description Part No. Price
KB-301-K Cordless Shear Kit #300 12-00117 $314.95
KB-302 14.4 volt NiCad Battery 12-00118 $87.50
KB-303 One Hour Battery Charger 12-00119 $88.25
KB-304 Carrying Case 12-00121 $37.50
KD440 14GA POWER SHEARS
This lightweight, pistol grip shear cuts 14 gauge
mild steel and most grades of stainless to 16
gauge. Double insulated, the KD 440 cuts over
150 inches/minute, leaving a clean, flat sheet,
ready to fabricate. Distortions are absorbed in an easily disposed of
waste curl, leaving the sheet cool and free of burn, chips, and burrs.
The cutting blades are finest high speed steel. (Also cuts sheet
metal, Stainless and Plastics) P/N 12-00676 ........$298.95
AIRCRAFT SPRUCE WEST AIRCRAFT SPRUCE EAST
CORONA, CA • (877) 4-SPRUCE Prices Subject to Change Without Notice
PEACHTREE CITY, GA • (877) 477-7823
CM
WP
ME
HA
AP
LG
EP
CS
IN
EL
AV
TO
TO
BV
BV