cabinet maker (joiner) program outline - Industry Training Authority

Theory Assessment: The learner must score a minimum of 70 percent on a written examination.
Achievement Criteria:
Performance The learner will reproduce a fully dimensioned shop drawing containing orthographic
and detailed views.
Conditions The learner will be given:
A completed drawing
Drafting materials
Suitable work area
Criteria The learner will score 70% or better on a rating sheet that reflects the following
criteria:
Neatness
Line types and weights
Accurate scaling
Annotated where required
Time limit
Performance The learner will create a cutting bill
Conditions The learner will be given:
The completed drawing from the above achievement criteria
Criteria The learner will score 70% or better on a rating sheet that reflects the following
criteria:
Accuracy
Completeness
Components listed in proper order
Time limit
Performance The learner will produce a cutting plan
Conditions The learner will be given:
The shop drawings and cutting bill above
Criteria The learner will score 70% or better on a rating sheet that reflects the following
criteria:
Accuracy
Completeness
Indicate trim allowances
Show the cutting sequence
Time limit
Performance The learner will perform material usage calculations for all of the materials
Conditions The learner will be given:
The shop drawings, cutting bill and the cutting plan above
Criteria The learner will score 70% or better on a rating sheet that reflects the following
criteria
Accuracy
Completeness
Time limit
Cabinet Maker (Joiner) • Industry Training Authority 18