Tiedown Handbook For Rail Movements - SDDCTEA - U.S. Army
Tiedown Handbook For Rail Movements - SDDCTEA - U.S. Army
Tiedown Handbook For Rail Movements - SDDCTEA - U.S. Army
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SIXTH EDITION <strong>SDDCTEA</strong> PAMPHLET 55-19<br />
Section IV. Tools for <strong>Rail</strong> Loading<br />
Table 1 outlines the suggested rail loading toolkit needed by personnel conducting a<br />
rail outload in CONUS. Specific information on some items follows the table.<br />
Table 1. Suggested CONUS <strong>Rail</strong> Loading Toolkit<br />
Quantity Item Remarks National Stock Number<br />
1pr Pliers Side cutting or slip -joint (8-inch)<br />
2 Puller, hoist<br />
Cable puller (used with cable<br />
grips), 4000-pound capacity<br />
25<br />
5120-00-239- 8251<br />
5120-00-059-6711<br />
5120-01-337-6485<br />
2 Ratchet 1/2-inch square drive, reversible 5120-00-230-6385<br />
1<br />
Removable<br />
Turnbuckle<br />
Handle<br />
To rapidly tighten turnbuckles with<br />
turnbuckle gear<br />
Available from Portec<br />
<strong>Rail</strong> Products, Inc.<br />
Phone 630-573-4778<br />
1 Screwdriver Common, 8-inch 5120-00-596-9364<br />
2 Socket<br />
2 Socket<br />
2 Socket<br />
1/2-inch square drive, 3/4-inch (12point)<br />
1/2-inch square drive, 7/8-inch (12point)<br />
1/2-inch square drive, 15/16-inch<br />
(12-point)<br />
5120-00-189-7985<br />
5120-00-189-7934<br />
5120-00-189-7935<br />
2 Tape Measure Steel, 12-foot, recoil type 5210-00-182-4797<br />
1 Wire Cutter Steel wire cutter 5110-01-473-9293<br />
10pr Gloves, Work Leather or leather-palm NA<br />
1 Nail Puller If not on pliers 5120-00-542-4828
Change language