Datasheet 5D-1 (issue 3.0) Track Disconnection Box - Invensys Rail
Datasheet 5D-1 (issue 3.0) Track Disconnection Box - Invensys Rail
Datasheet 5D-1 (issue 3.0) Track Disconnection Box - Invensys Rail
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Track</strong> <strong>Disconnection</strong> <strong>Box</strong><br />
One Termination <strong>Box</strong> for All Installations<br />
• One size replaces existing single and double boxes<br />
• Use same tool for cover screws and terminals<br />
• Fully equipped for termination of one or two adjacent track<br />
circuits within one box<br />
• Drill guide indentations<br />
• Improved water resistance—Nylon washers under cover<br />
screws<br />
• Maintenance-free powder-coated aluminium<br />
Save Time and Money<br />
<strong>Invensys</strong> <strong>Rail</strong>’s track disconnection<br />
box comes in one universal size,<br />
which simplifies specifying, ordering<br />
and installing.<br />
The box comes with two sets of threeway<br />
terminals (with disconnection<br />
links); enough for any installation.<br />
Easy Installation<br />
Installers only need one tool, a<br />
13 mm hex spanner, for the cover<br />
screws and the terminals.<br />
Drill guides in the base of the box<br />
assist with drilling track cable holes.<br />
Mounts directly onto a standard<br />
50 mm post.<br />
Long Life<br />
Powder coating extends the life of<br />
the aluminium body, and Nylon<br />
washers under the stainless steel<br />
cover screws reduce the ingress of<br />
moisture.<br />
Terminals, mounting screws and<br />
links are also stainless steel.<br />
<strong>Datasheet</strong> <strong>5D</strong>-1
Description<br />
<strong>Invensys</strong> <strong>Rail</strong>’s track disconnection box<br />
is a robust aluminium-alloy diecast box<br />
and cover to accommodate the<br />
transition and termination of track<br />
circuit tail cables.<br />
Two 3-way M6 terminal blocks with<br />
disconnection links are fitted inside<br />
the box. These allow the termination of<br />
cables for one or two track circuits, and<br />
are fully accessible when the cover is<br />
removed.<br />
A 13 mm box spanner fits all cover<br />
screws and terminals.<br />
Drill guides (indentations) are provided<br />
in the base of the box to assist when<br />
drilling track cable entry holes.<br />
The disconnection box mounts on a<br />
50 mm OD post through which the<br />
cables from the track feed set enter.<br />
An M10 cup-point bolt clamps the box<br />
to the post.<br />
Ordering<br />
<strong>Disconnection</strong> <strong>Box</strong><br />
Part number 3355200801<br />
50 mm Mounting Post<br />
Part number AM622-23/7<br />
117<br />
69<br />
65<br />
Specifications<br />
380 Docklands Drive, Docklands, Victoria 3008, Australia<br />
T +61 1300 724 518 F +61 3 9616 9001 ABN 78 000 102 483<br />
E enquiries.asiapacific@invensysrail.com W http://www.invensysrail.com<br />
<strong>Datasheet</strong> <strong>5D</strong>-1 <strong>issue</strong> <strong>3.0</strong><br />
Body and cover Powder-coated aluminium<br />
Cover screws M8 stainless steel (13 mm hex head)<br />
with M8 Nylon washers<br />
Post mounting bolt M10 cup point (17 mm hex head)<br />
Terminals 6 pairs with disconnection links<br />
M6 (13 mm hex head)<br />
Dimensions See drawing<br />
Mounting Galvanised pipe 50 mm (2") OD<br />
∅188<br />
∅180<br />
∅50.1<br />
∅68<br />
∅76<br />
30°<br />
97<br />
<strong>Disconnection</strong> box<br />
<strong>Track</strong> cable entry gland<br />
(not included)<br />
50 mm mounting post<br />
R76<br />
56<br />
24<br />
7.5°<br />
.<br />
37.5°<br />
52.5°<br />
Drill guides<br />
67.5°