spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.

WICKMAN
Spindle Tooling for Automatics
96
Description
Hardinge
Part
Number Figure Style
1 2
3
Dimensions
Machine Tool Builder's
A
B
C
D
Rated Capacity
Pad Back
Collet
Part Bearing Overall Head
Number Diameter Length Diameter Thread Round Hexagon Square
WICKMAN: 2 1 ⁄4" Capacity – Six Spindle (Larger Capacity Solid Collets Available up to 2 19 ⁄32" Round, 2 1 ⁄4" Hex, 1 53 ⁄64" Square)
3.026" 7.125" 3.760" 21 ⁄4" 115 ⁄16" 137 ⁄64"
Collet, Solid 4483 1 (76.86) (180.98) (95.50) 2.849" x 22 LH (57.15) (49.21) (40.08)
1.812" 5.625" 3.053" 21 ⁄4" 115 ⁄16" 137 ⁄64"
Collet, Burring 4287 2 (46.02) (142.88) (77.55) — (57.15) (49.21) (40.08)
3.026" 7.125" 3.760" 21 ⁄4" 115 ⁄16" 137 ⁄64"
Collet, Style “S” Master 5305 1 S22 56113 (76.86) (180.98) (95.50) 2.849" x 22 LH (57.15) (49.21) (40.08)
2.560" 6.750" — 21 ⁄4" 115 ⁄16" 137 ⁄64"
Feed Finger, Solid 4477 3 (65.02) (171.45) — 2.460" x 22 LH (57.15) (49.21) (40.08)
2.560" 6.750" — 2" 123 ⁄32" 113 ⁄32"
Feed Finger, Style “B” Master 6361 3 B22 6665 (65.02) (171.45) — 2.460" x 22 LH (50.80) (43.66) (35.72)
WICKMAN: 2 5 ⁄8" Capacity – Single and Six Spindle (Larger Capacity Solid Collets Available up to 3 1 ⁄8" Round, 2 11 ⁄16" Hex, 2 3 ⁄16" Square)
3.613" 6.500" 4.380" 2 5 ⁄8" 2 17 ⁄64" 1 27 ⁄32"
Collet, Solid 4199 1 (91.77) (165.10) (111.25) 3.375" x 18 RH (66.68) (57.55) (46.83)
Collet, HQC Quick-Change See page 98
3.613" 6.500" 4.380" 25 ⁄8" 217 ⁄64" 127 ⁄32"
Collet, Style “S” Master 5025 1 S26 56133 (91.77) (165.10) (111.25) 3.375" x 18 RH (66.68) (57.55) (46.83)
3.613" 6.500" 4.380" 25 ⁄8" 217 ⁄64" 127 ⁄32"
Collet, Martin Master 5411 1 M26 59153 (91.77) (165.10) (111.25) 3.375" x 18 RH (66.68) (57.55) (46.83)
2.995" 7.000" — 25 ⁄8" 217 ⁄64" 127 ⁄32"
Feed Finger, Solid 4201 3 (76.07) (177.80) — 2.870" x 24 LH (66.68) (57.55) (46.83)
2.995" 7.000" — 23 ⁄8" 23 ⁄64" 143 ⁄64"
Feed Finger, Style “B” Master 6137 3 B26 6673 (76.07) (177.80) — 2.870" x 24 LH (60.33) (51.99) (42.47)
2.995" 7.000" — 29 ⁄16" 27 ⁄32" 151 ⁄64"
Feed Finger, Style “A” Master 6449 3 A26 6739 (76.07) (177.80) — 2.870" x 24 LH (65.09) (56.36) (45.64)
3 - Master Collet Pads available in smooth or serrated order holes
NOTE: Millimeters in parentheses.
Collets and feed fingers available for larger capacity machines.
Collets available in smooth or serrated order holes.
For feed finger pads, styles “A” and “B” available in hardened steel, nickel cast iron,
bronze, or nylon; style “AF” in hardened steel or chrome plated.
S-pads available in hardened and ground, semi-hard emergency and soft
emergency.