spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.
spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.
spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Spindle Tooling <strong>for</strong> Automatics<br />
1 - Round<br />
2 - Hexagon<br />
Description<br />
<strong>Hardinge</strong><br />
Part<br />
Number Figure Style<br />
1 2<br />
4<br />
A<br />
B<br />
Dimensions<br />
C<br />
D<br />
Machine Tool Builder's<br />
Rated Capacity<br />
Pad Back<br />
Collet<br />
Part Bearing Overall Head<br />
Number Diameter Length Diameter Thread Round Hexagon Square<br />
BROWN & SHARPE: 3 ⁄8" Capacity – #2 H<strong>and</strong> (Larger Capacity Solid Collets Available up to [22: 1 1 ⁄4" Round, 1 1 ⁄16" Hex, 7 ⁄8" Square], [22SC: 1 1 ⁄4" R, 1 5 ⁄64" H, 7 ⁄8" S])<br />
1.498" 4.250" 1.925" 1" 55<br />
⁄64"<br />
45<br />
⁄64"<br />
Collet, Solid 3111 1 22 (38.05) (107.95) (48.90) — (25.40) (21.83) (17.86)<br />
1.498" 4.312" 1.925" 1" 55<br />
⁄64"<br />
45<br />
⁄64"<br />
Collet, Solid 3109 2 22Y (38.05) (109.53) (48.90) — (25.40) (21.83) (17.86)<br />
Collet, Solid 1.498" 4.250" 1.95" 11 ⁄4" 15 ⁄64"<br />
7 ⁄8"<br />
Stop Collet 3227 1 22SC (38.05) (107.95) (48.90) 1.291" x 24 RH (31.75) (27.38) (22.23)<br />
Collet, Burring See page 48<br />
.630" 2.938" — 3 ⁄8" 5<br />
⁄16"<br />
17<br />
⁄64"<br />
Feed Finger, Solid 3035 3 10 (16.00) (74.63) — .560" x 20 LH (9.53) (7.94) (6.75)<br />
10 .630" 2.938" — 3 ⁄8" 5<br />
⁄16"<br />
17<br />
⁄64"<br />
Feed Finger, Style “B” Master 6021 3 B10 6643 (16.00) (74.63) — .560" x 20 LH (9.53) (7.94) (6.75)<br />
Feed Finger, Style “B” Master 10 .673" 2.938" — 3 ⁄8" 5<br />
⁄16"<br />
17<br />
⁄64"<br />
Adjustable Tension 6023 4 B10X 6643 (17.09) (74.63) — .560" x 20 LH (9.53) (7.94) (6.75)<br />
Round Hexagon<br />
Min. Max. Min. Max.<br />
Feed Finger, Style “AF” Master 10 73211 .630" 2.781" — 1<br />
⁄16"<br />
3 ⁄8" 1 ⁄8" 5<br />
⁄16"<br />
Adjustable Tension 7005 5 AF10 73232 (16.00) (70.64) — .560" x 20 LH (1.59) (9.53) (3.18) (7.94)<br />
10 .395" .906" — 1<br />
⁄16"<br />
9<br />
⁄32"<br />
1 ⁄8" 1 ⁄4"<br />
Bushing, Style “AF” 7365 6 AF10 (10.03) (23.01) — — (1.59) (7.14) (3.18) (6.35)<br />
<strong>Hardinge</strong> <strong>Inc</strong>. One <strong>Hardinge</strong> Drive | P.O. Box 1507 | Elmira, New York 14902-1507 USA<br />
USA: 800-843-8801 or 607-378-4022 | Canada: 800-468-5946 | Fax: 607-734-3886<br />
To Order Online: www.hardinge<strong>tooling</strong>.com | Corporate Homepage: www.hardinge.com | E-mail: info@hardinge<strong>tooling</strong>.com<br />
5<br />
NOTE: Millimeters in parentheses.<br />
Collets <strong>and</strong> feed fingers available <strong>for</strong> larger capacity machines.<br />
Collets available in smooth or serrated order holes.<br />
Neoprene chip <strong>and</strong> coolant seals not included with collets (see Chapter 4).<br />
Feed tubes determine rated capacity.<br />
For feed finger pads, styles “A” <strong>and</strong> “B” available in hardened steel, nickel cast iron,<br />
bronze, or nylon; style “AF” in hardened steel or chrome plated.<br />
3<br />
6<br />
45<br />
BROWN & SHARPE
Change language