spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.

GILDMEISTER
Spindle Tooling for Automatics
68
1
Description
Hardinge
Part
Number Figure Style
Dimensions
Machine Tool Builder's
A
B
C
D
Rated Capacity
Pad Back
Collet
Part Bearing Overall Head
Number Diameter Length Diameter Thread Round Hexagon Square
Gildemeister: GM32, GS32, AS32, AV32 (Larger Capacity Solid Collets Available up to 1 39 ⁄64" Round, 1 25 ⁄64" Hex, 1 1 ⁄8" Square)
2.085" 5.275" 2.735" 1.889" x 1.5mm 11 ⁄4" 13 ⁄32"
7 ⁄8"
Collet, Solid 1004A 1 (52.96) (133.98) (69.46) L.H. Int. (31.75) (27.78) (22.22)
2.085" 5.275" 2.735" 1.889" x 1.5mm 11 ⁄4" 15 ⁄64"
7 ⁄8"
Collet, Style "S" Master 4571A 1 S12 56033 (52.96) (133.98) (69.46) L.H. Int. (31.75) (27.38) (22.22)
2.085" 5.275" 2.735" 1.889" x 1.5mm 11 ⁄4" 15 ⁄64"
7 ⁄8"
Collet, Style "S" Master 8583A 1 S15 56053 (52.96) (133.98) (69.46) L.H. Int. (31.75) (27.38) (22.22)
1.574" 5.343" — 1.495" x 1.5mm 11 ⁄4" 13 ⁄32"
7 ⁄8"
Feed Finger, Solid 1891A 2 (39.98) (135.71) — L.H. Ext. (31.75) 27.78) (22.22)
1.574" 5.343" — 1.495" x 1.5mm 11 ⁄8" 31
⁄32"
25
⁄32"
Feed Finger, Style "B" Master 1009A 2 B7 6631 (39.98) (135.71) — L.H. Ext. (28.57) (24.60) (18.25)
Gildemeister: GM32/6 (Larger Capacity Solid Collets Available up to 1 39 ⁄64" Round, 1 25 ⁄64" Hex, 1 1 ⁄8" Square)
2.085" 5.275" 2.735" 1.889" x 1.5mm 11 ⁄4" 13 ⁄32"
7 ⁄8"
Collet, Solid 1004A 1 (52.95) (133.98) (69.46) L.H. Int. (31.75) (27.78) (22.22)
2.085 5.275" 2.735" 1.889" x 1.5mm 11 ⁄4" 13 ⁄32"
7 ⁄8"
Collet, Style "S" Master 4571A 1 S12 56033 (52.95) (133.98) (69.46) L.H. Int. (31.75) (27.78) (22.22)
1.634" 5.343" — 1.496" x 1.5mm 11 ⁄4" 13 ⁄32"
57
⁄64"
Feed Finger, Solid 5774K 2 (41.50) (135.71) — R.H. Ext. (31.75) (27.78) (22.62)
Gildemeister: GM36/42
2.205" 5.157" 2.850" 2.047" x 1.5mm — — —
Collet, Solid — 1 (56.00) (131.) (72.39) L.H. Int.
1.771" 5.354" — 1.653" x 1.5mm — — —
Feed Finger, Solid — 2 (45.00) (136.24) — L.H. Ext.
Gildemeister: GM42
2.519" 5.078" 3.169" 2.323" x 1.57mm — — —
Collet, Solid 1172K 1 (63.98) (128.98) (80.49) L.H. Int.
2.023" 5.354" — 1.889" x 1.5mm — — —
Feed Finger, Solid 1174K 2 (51.38) (136.00) — R.H. Ext.
3 - Master Collet Pads available in smooth or serrated order holes
NOTE: Millimeters in parentheses.
Collets and feed fingers available for larger capacity machines.
Collets available in smooth or serrated order holes.
For feed finger pads, styles “A” and “B” available in hardened steel, nickel cast iron,
bronze, or nylon; style “AF” in hardened steel or chrome plated.
S-pads available in hardened and ground, semi-hard emergency and soft
emergency.
2