spindle tooling for automatics, turret lathes and rotary - Hardinge Inc.

WARNER & SWASEY
Spindle Tooling for Automatics
90
Description
Hardinge
Part
Number Figure Style
3 - Master Collet Pads available in smooth or serrated order holes
Dimensions
Machine Tool Builder's
A
B
C
D
Rated Capacity
Pad Back
Collet
Part Bearing Overall Head
Number Diameter Length Diameter Thread Round Hexagon Square
WARNER & SWASEY: 1 3 ⁄4" Capacity – Five Spindle (Larger Capacity Solid Collets Available up to 2 9 ⁄32" Round, 1 31 ⁄32" Hex, 1 39 ⁄64" Square)
2.681" 6.000" 3.255" 13 ⁄4" 133 ⁄64" 115 ⁄64"
Collet, Solid 4425 1 (68.10) (152.40) (82.68) 2.500" x 16 RH (44.45) (38.50) (31.35)
2.681" 6.000" 3.255" 2" 123 ⁄32" 113 ⁄32"
Collet, Style “S” Master 5255 1 S20 56093 (68.10) (152.40) (82.68) 2.500" x 16 RH (50.80) (43.66) (35.72)
2.681" 6.000" 3.255" 13 ⁄4" 133 ⁄64" 115 ⁄64"
Collet, Martin Master 5531B 1 M17 MP3907 (68.10) (152.40) (82.68) 2.500" x 16 RH (44.45) (38.50) (31.35)
2.220" 5.500" — 13 ⁄4" 133 ⁄64" 115 ⁄64"
Feed Finger, Solid MP2981 2 (56.39) (139.70) — 2.059" x 24 LH (44.45) (38.50) (31.35)
2.220" 5.500" — 13 ⁄4" 133 ⁄64" 115 ⁄64"
Feed Finger, Style “B” Master 6345 2 B20 6661 (56.39) (139.70) — 2.059" x 24 LH (44.45) (38.50) (31.35)
2.220" 5.500" — 13 ⁄4" 133 ⁄64" 115 ⁄64"
Feed Finger, Style “A” Master 2725A 2 A17 MP3959 (56.39) (139.70) — 2.059" x 24 LH (44.45) (38.50) (31.35)
WARNER & SWASEY: 2 1 ⁄4" Capacity – 1AB – Single and Five Spindle (Larger Capacity Solid Collets Available up to 2 19 ⁄32" Round, 2 1 ⁄4" Hex, 1 53 ⁄64" Square)
3.055" 6.000" 3.505" 21 ⁄4" 115 ⁄16" 137 ⁄64"
Collet, Solid 4423 1 (77.60) (152.40) (89.03) 2.875" x 16 RH (57.15) (49.21) (40.08)
3.055" 6.000" 3.505" 21 ⁄4" 115 ⁄16" 137 ⁄64"
Collet, Style “S” Master 5257 1 S22 56113 (77.60) (152.40) (89.03) 2.875" x 16 RH (57.15) (49.21) (40.08)
3.055" 6.000" 3.505" 23 ⁄8" 23 ⁄64" 143 ⁄64"
Collet, Martin Master 5461 1 M23 5933 (77.60) (152.40) (89.03) 2.875" x 16 RH (60.33) (51.99) (42.47)
2.598" 5.500" — 21 ⁄4" 115 ⁄16" 137 ⁄64"
Feed Finger, Solid 4419 2 (65.99) (139.70) — 2.496" x 24 LH (57.15) (49.21) (40.08)
2.598" 5.500" — 2" 123 ⁄32" 113 ⁄32"
Feed Finger, Style “B” Master 6347 2 B22 6665 (65.99) (139.70) — 2.496" x 24 LH (50.80) (43.66) (35.72)
2.598" 5.500" — 21 ⁄8" 153 ⁄64" 11 ⁄2"
Feed Finger, Style “A” Master 6461 2 A22W (65.99) (139.70) — 2.496" x 24 LH (53.98) (46.43) (38.10)
WARNER & SWASEY: 3" Capacity – 2AB – Single Spindle (Larger Capacity Solid Collets Available up to 3 11 ⁄32" Round, 2 7 ⁄8" Hex, 2 23 ⁄64" Square)
3.805" 6.750" 4.645" 3" 219 ⁄32" 27 ⁄64"
Collet, Solid MP3605 1 (96.65) (171.45) (117.98) 3.625" x 16 RH (76.20) (65.88) (53.58)
3.805" 6.750" 4.645" 3" 219 ⁄32" 27 ⁄64"
Collet, Style “S” Master 5261 1 S30 56153 (96.65) (171.45) (117.98) 3.625" x 16 RH (76.20) (65.88) (53.58)
3.805" 6.750" 4.645" 3" 219 ⁄32" 27 ⁄64"
Collet, Martin Master MP3951 1 M30 5917 (96.65) (171.45) (117.98) 3.625" x 16 RH (76.20) (65.88) (53.58)
3.355" 6.875" — 3" 219 ⁄32" 27 ⁄64"
Feed Finger, Solid MP3656 2 (85.22) (174.63) — 3.233" x 20 LH (76.20) (65.88) (53.58)
3.355" 6.875" — 25 ⁄8" 217 ⁄64" 127 ⁄32"
Feed Finger, Style “B” Master 6349 2 B30 6677 (85.22) (174.63) — 3.233" x 20 LH (66.68) (57.55) (46.83)
3.355" 6.875" — 213 ⁄16" 227 ⁄64" 163 ⁄64"
Feed Finger, Style “A” Master 4726D 2 A30 6745 (85.22) (174.63) — 3.233" x 20 LH (71.44) (61.52) (50.40)
1
2
NOTE: Millimeters in parentheses.
Collets and feed fingers available for larger capacity machines.
Collets available in smooth or serrated order holes.
For feed finger pads, styles “A” and “B” available in hardened steel, nickel cast iron,
bronze, or nylon; style “AF” in hardened steel or chrome plated.
S-pads available in hardened and ground, semi-hard emergency and soft
emergency.
Martin Master Collet & Pad