DS TECH US_CAD Motox Catalogue 2011_1

1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
MOTOX Gear Motors
Standards
The important dimensions correspond to the DIN standards, namely:
Shaft heights DIN 747
Cylindrical shaft ends DIN 748/1
Mounting flanges DIN 42948
Coaxial concentricity and runout of shaft ends and of flange surface DIN 42955
Parallel keys DIN 6885/1
Second motor shaft extension DIN 748/3
Centre holes in shaft ends DIN 332/2
Direction of rotation of the gear motors
Three-phase a.c. motors are arranged so that the motor shaft turns to the right (IEC 60034-8).
The direction of rotation of the gear unit output shaft may be reversed by swapping over two external wires at the motor. For singlephase
a.c. geared motors and for geared motors fitted with backstop, the required direction of rotation must be stated when the order
is placed.
The Weights [lbs / kg] shown in the Dimension Sheets are average values and do not include Oil.
For Oil Quantities according to the operational mounting positions, see chapter “Lubrication, Oil Quantities”.
Specific Weights of Oils:
Mineral Oil (CLP) = 0.9 kg/l (2 lbs/l)
Synthetic Oil (PGLP) = 1.05 kg/l (2.3 lbs/l)
3 - 5