DS TECH US_CAD Motox Catalogue 2011_1

Standards and specifications
MOTOX Geared Motors
The motors comply with all appropriate international (IEC-), American (NEMA-, CSA-, UL-R-), European (EN-, CENELEC-) and national
(DIN/VDE-) standards:
Overview
IEC EN / HD DIN / VDE Title
IEC 60027-4 HD 245.4 DIN 1304-7 Symbols to be used for electrical machines
IEC 60034-1 EN 60034-1
IEC 60034-2 EN 60034-2
IEC 60034-5 EN 60034-5
IEC 60034-6 EN 60034-6
IEC 60034-7 EN 60034-7
IEC 60034-8 EN 60034-8
IEC 60034-9 EN 60034-9
IEC 60034-12 EN 60034-12
IEC 60034-14 EN 60034-14
IEC TS 60034-17 -
DIN EN 60034-1
VDE 0530-1
DIN EN 60034-2
VDE 0530-2
DIN EN 60034-5
VDE 0530-5
DIN EN 60034-6
VDE 0530-6
DIN EN 60034-7
VDE 0530-7
DIN EN 60034-8
VDE 0530-8
DIN EN 60034-9
VDE 0530-9
DIN EN 60034-12
VDE 0530-12
DIN EN 60034-14
VDE 0530-14
DIN IEC / TS
60034-17
VDE 0530-17
Rotating electrical machines:
- Rating and performance
- Methods for determining losses and efficiency of rotating electrical machinery from tests
(excluding machines for traction vehicles)
-Degrees of protection provided by the integral design of rotation electrical machines (IP
code) - Classification
- Methods of cooling (IC-Code)
-Classification of types of constructions, mounting arrangements and the terminal box position
(IM code)
- Terminal markings and direction of rotation
- Noise limits
-Starting performance of single-speed three- phase cage induction motors
-Mechanical vibration of certain machines with shaft heights 56 mm and higher
-Cage induction motors when fed from converters - Application Guide
IEC 60038 HD 472 DIN IEC 60038 IEC standard voltages
- EN 50347 DIN EN 50347 General purpose 3 phase induction motors having standard dimensions and outputs.
IEC 60085 HD 566 DIN IEC 60085 Thermal evaluation and classification of electrical insulation
IEC 60445 EN 60445 DIN EN 60445 Identification of equipment terminals and of terminations of certain designated conductors
IEC 60529 EN 60529
DIN EN 60529
VDE 0470-1
Degrees of protection provided by enclosures (IP-Code)
- EN 50262 DIN EN 50262 Metric cable glands for electrical installations.
- - EDIN 42925
Terminal box cable entries for three-phase cage induction motors at rated voltages 400V to
690V.
NEMA CSA UL-R Title
MG 1 - - Motors and Generators
- C22.2 No. 100 - 95 - Motors and Generators
- C22.2 No 0 - General Requirements - Canadian Electrical Code Part II
- C22.2 No 25 - Enclosures for Use in Class II Groups E, F and G - Hazardous Locations
- C22.2 No 30 - Explosion-Proof Enclosures for Use in Class 1 Hazardous Locations
- C22.2 No 77 - Motors with Inherent Overheating Protection
- C22.2 No 145 -
Motors and Generators for Use in Hazardous Locations Class I Groups C and D,
Class II Groups E, F and G
- - UL 1004 Electric Motors
9 - 7
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2