DS TECH US_CAD Motox Catalogue 2011_1

Dimensions of the manual brake release lever
MOTOX Geared Motors
The dimensions of the manual brake release lever depend on the size (see table) There is a possibility that the lever could collide with
the connecting cable on motors where the cable entry is at the non-drive end. Please contact us if you have any questions.
L1
Motor size Brake size Terminal box
position
Distance from the center
line of the motor to
the outermost position
of the manual brake
release lever
Dist. from center line of
motor to outermost
position of manual
brake release lever, on
design with locking
mechanism
LBLH-LBS
G_D087_XX_00034b
Distance from the center
of the terminal box
to the center of the
manual brake release
lever
L1 L1 LBLH-LBS C
71 L4 1A, 2A, 3A, 4A 107 127 124.8 12°
L8 1A, 2A, 3A, 4A 116 136 125.3 10°
71Z L4 1A, 2A, 3A, 4A 107 127 143.8 12°
L8 1A, 2A, 3A, 4A 116 136 144.3 10°
80 L4 1A, 2A, 3A, 4A 107 127 161.3 12°
L8 1A, 2A, 3A, 4A 116 136 161.8 10°
L16 1A, 2A, 3A, 4A 132 151 172.9 9°
90 L8 1A, 2A, 3A, 4A 116 136 181.8 10°
L16 1A, 2A, 3A, 4A 132 151 192.9 9°
L32 1A, 2A, 3A, 4A 161 161 194.9 10°
90Z L8 1A, 2A, 3A, 4A 116 136 155.8 10°
L16 1A, 2A, 3A, 4A 132 151 166.9 9°
L32 1A, 2A, 3A, 4A 161 161 168.9 10°
100 L16 1A, 2A, 3A, 4A 132 151 197.4 9°
L32 1A, 2A, 3A, 4A 161 161 199.4 10°
L60 1A, 2A, 3A, 4A 195 195 203 9°
112 L32 1A, 2A, 3A, 4A 161 161 213.9 10°
L60 1A, 2A, 3A, 4A 195 195 217.5 9°
132 L80 1A, 2A, 3A, 4A 240 240 232.0 10°
L150 1A, 2A, 3A, 4A 279 279 245.1 9°
132Z L80 1A, 2A, 3A, 4A 240 240 176.0 10°
L150 1A, 2A, 3A, 4A 279 279 189.1 9°
160 L150 1A, 2A, 3A, 4A 279 279 312.6 9°
L260 1A, 2A, 3A, 4A 319 319 319.1 10°
180 L260 1A, 2A, 3A, 4A 319 319 399.6 (410.6) 10°
180Z L260 1A, 2A, 3A, 4A 319 319 277.6 (288.6) 10°
200 L260 1A, 2A, 3A, 4A 319 319 361.9 10°
L400 1A, 2A, 3A, 4A 445 445 371.7 10°
Angle of the manual
brake release
lever when brake
released
Tolerance of +3°
9 - 39
(450) 655-7447
info@pt-dstech.com
www.dstech.ca
1275 Newton, local 15
Boucherville, Qc,
Canada, J4B 5H2