Assembly Instructions - Whalen Style

More documents

Recommendations

Info

Assembly Instructions for Table Top 12. The Tabletop is ready for use now. Place the Tabletop in the desired location of your room and position TV in center of console with no overhang on either side as shown detail #5. Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Factory No. 33-10944 Page # 9
Assembly Instructions for Universal Wall Mount Installing XYZ Mounting Frame onto WOODEN WALL 13. The XYZ Mounting Frame must be mounted to two Wood Studs at least 12” apart, using a high quality stud sensor to locate the two adjacent studs. After you have located the studs, verify with a nail for added security. See detail #6A. 14. Pre-drill a 2 1/2" deep hole at the desired height in each stud using a 3/16” drill bit, make sure that the holes are centered in the studs and level with each other. Use the XYZ Mounting Frame (I) as a template to mark the corresponding location for the bottom holes in each stud, drill holes 2 1/2" deep with the 3/16” drill bit at the marked location. 15. Orient the Mounting Frame with the “U” plate against the wall, and using four Lag Bolts (8) with Large Flat Washer (7) through the slots of “U” Plate on Mounting Frame into the holes in the wall, secure the mounting frame to the wall as shown in detail #6B. Do not over tighten the Lag Bolts. Tighten Lag Bolts only until the Lag Bolt Washer is pulled firmly against the “U” Plate of Mounting Frame. If there is a layer of drywall or other material, this drywall or other material may not exceed 3/8 inch in thickness. Failure to heed this caution may result property damage and/or personal injury. Parts Provided Qty I – XYZ Mounting Frame (1) (7) – Large Flat Washer (4) (8) –2 1/2” Lag Bolt (4) Tools Required Stud Sensor, Mallet, Power Drill, 3/16” Drill Bit, 1/2” Socket Set Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Factory No. 33-10944 Page # 10
Page 1 and 2: THIS ITEM IS DESIGNED TO BE 3 IN 1
Page 3 and 4: Parts & Hardware Master List Please
Page 5 and 6: ADULT ASSEMBLY REQUIRED If you have
Page 7 and 8: Parts & Hardware List for Option 1:
Page 9 and 10: Assembly Instructions Note: Please
Page 11 and 12: Assembly Instructions 6. To make th
Page 13 and 14: Assembly Instructions Note: There a
Page 15 and 16: Mounting Monitor Bracket to a telev
Page 17 and 18: Assembly Instructions 19. With assi
Page 19 and 20: TIPPING RESTRAINT HARDWARE Note: We
Page 21 and 22: QUALITY GUARANTEE We are confident
Page 23 and 24: Parts & Hardware List for Universal
Page 25 and 26: 4. Stand the unit upright. Assembly
Page 27: Assembly Instructions for Table Top
Page 31 and 32: Mounting Monitor Bracket to a telev
Page 33 and 34: Assembly Instructions 25. With assi

Assembly Instructions - Whalen Style

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?