Orthopedic

More documents

Recommendations

Info

Narrow Plate MC-DCP 4.5 mm Schmalplatte MC-DCP 4.5 mm Plaque étroite MC-DCP 4.5 mm Indication: Used as a neutralisation and tension band plate for fractures of forearm, humerus and tibia. Not for use on the femur. The MC-DCP holes allow compression in both directions of the longitudinal axis. MC-DCP: Minimal contact dynamic compression plate. Plate details: Use broad plates with 6 or 7 holes in exceptional cases only on humerus. Ref. No Stainless Steel ROT-202034-02 ROT-202052-03 ROT-202070-04 ROT-202088-05 ROT-202106-06 ROT-202124-07 ROT-202142-08 ROT-202160-09 ROT-202178-10 ROT-202196-11 ROT-202214-12 ROT-202232-13 ROT-202250-14 ROT-202268-15 ROT-202286-16 2/2 Ref. No Titanium ROT-202034-02 T ROT-202052-03 T ROT-202070-04 T ROT-202088-05 T ROT-202106-06 T ROT-202124-07 T ROT-202142-08 T ROT-202160-09 T ROT-202178-10 T ROT-202196-11 T ROT-202214-12 T ROT-202232-13 T ROT-202250-14 T ROT-202268-15 T ROT-202286-16 T Section of compression plates on forearm, humerus and tibia Plate thickness: 4.6 mm Plate width: 13.5 mm Hole spacing: 18.0 mm Screws to be used: All holes accept diam. 4.5 mm cortical screws. The end hole can be used for diam. 6.5 mm cancellous screws. Material: Certified Stainless Steel according to ASTM F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136 - ISO 5832-3 Holes 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Length mm 34 52 70 88 106 124 142 160 178 196 214 232 250 268 286 Tel. +49-74 62- 94 45-0 · Fax +49-74 62 - 94 45-20 info@reda-instrumente.de · www.reda-instrumente.de
Section of compression plates on ulna and radius Tel. +49-74 62- 94 45-0 · Fax +49-74 62 - 94 45-20 info@reda-instrumente.de · www.reda-instrumente.de Narrow Plate MC-DCP 3.5 mm Schmalplatte MC-DCP 3.5 mm Plaque étroite MC-DCP 3.5 mm Indication: Used for smaller bones particularly ulna and radius. The MC- DCP holes allow compression in both directions of the longitudinal axis. MC-DCP: Minimal contact dynamic compression plate. Plate details: Plate profile 4.0 x 11.0 mm Ref. No Stainless Steel ROT-203051-04 ROT-203064-05 ROT-203077-06 ROT-203090-07 ROT-203103-08 ROT-203116-09 ROT-203129-10 ROT-203142-11 ROT-203155-12 Plate thickness: 4.0 mm Plate width: 11.0 mm Hole spacing: 13.0 mm Screws to be used: Fixation with 3.5 mm small cortical screws and 4.0 mm small cancellous screws. Material: Certified Stainless Steel according to ASTM F.138 - ISO 5832/1. Certified Titanium alloy according to ASTM F.136 - ISO 5832-3 Ref. No Titanium ROT-203051-04 T ROT-203064-05 T ROT-203077-06 T ROT-203090-07 T ROT-203103-08 T ROT-203116-09 T ROT-203129-10 T ROT-203142-11 T ROT-203155-12 T Holes 4 5 6 7 8 9 10 11 12 Length mm 51 64 77 90 103 116 129 142 155 2/3
Page 1:
Orthopädie Instrumente Orthopedic
Page 4 and 5:
2 Prüf- und Meßinstrumente Examin
Page 6 and 7:
4 Saugrohre Suction tubes Tubos de
Page 8 and 9:
6 Skalpell-Griffe Scalpel Handles M
Page 10 and 11:
8 Skalpell-Griffe Scalpel Handles M
Page 12:
10 Skalpell-Klingen, Steril Scalpel
Page 15 and 16:
STANDARD 09102-11 11,5 cm, 4 1 /2
Page 17 and 18:
Zahnfleischscheren Gum Scissors Tij
Page 19 and 20:
KNOWLES 09930-14 14 cm, 5 1 /2“ B
Page 21 and 22:
gezahnt saw edge dentadas dentellat
Page 23 and 24:
VOLKMANN 11,5 cm, 4 1 /2“ 19294-2
Page 25 and 26:
40x30 mm spitz sharp agudo acuto st
Page 27 and 28:
spitz sharp agudo acuto WEITLANER 1
Page 29 and 30:
ADSON 19682-26 - 19683-26 26,5 cm,
Page 31 and 32:
Beckman-Adson 31 cm, 12 1 /4“ Tel
Page 33 and 34:
MEYERDING Tel. +49-74 62- 94 45-0
Page 35 and 36:
STILLE 31101-24 24 cm, 9 1 /2” WI
Page 37 and 38:
Tel. +49-74 62- 94 45-0 · Fax +49-
Page 39 and 40:
HOPKINS 31370-20 20 cm, 8” WOLFF
Page 41 and 42:
CLEVELAND 33103-14 14 cm, 5 1 /2”
Page 43 and 44:
OLIVECRONA 33147-20 20 cm, 7.9“ L
Page 45 and 46:
RUSKIN 33216-18 33217-18 18 cm, 7
Page 47 and 48:
LISTON 33274-14 14 cm, 5 1 /2” 33
Page 49 and 50:
FERGUSSON 33360-21 21 cm, 8 1 /4”
Page 51 and 52:
selbstzentrierend self-centering au
Page 53 and 54:
33410-13 13,5 cm, 5 1 /4” MARTIN
Page 55 and 56:
REILL 33416-17 17 cm, 6 3 /4” 334
Page 57 and 58:
33450-01 Erwachsen adult size p. ad
Page 59 and 60:
COBB 27,9 cm 11“ Tel. +49-74 62-
Page 61 and 62:
000 00 0 2 mm 2,5 mm 3,3 mm 1 2 3 3
Page 63 and 64:
33489-09 Löffel Kürette, klein 9
Page 65 and 66:
REDA 25 cm, 10“ 000 3,6 mm 00 4,4
Page 67 and 68:
33509-03 Ø 3 mm 33509-05 Ø 5 mm 3
Page 69 and 70:
PASSOW 12 cm, 4 3 /4” 33626-35 3,
Page 71 and 72:
MINI-LAMBOTTE Tel. +49-74 62- 94 45
Page 73 and 74:
33665-24 24,5 cm, 9 3 /4” ZIELKE
Page 75 and 76:
33676-01 18,5 cm, 7 1 /4” Griff a
Page 77 and 78:
Ø 30 mm COLLIN 20 cm, 8“ 33690-2
Page 79 and 80:
Ø 30 mm 24,5 cm, 9 3 /4” 215 g 3
Page 81 and 82:
12,5 mm 12,5 mm 11 mm FARABEUF 3370
Page 83 and 84:
Tel. +49-74 62- 94 45-0 · Fax +49-
Page 85 and 86:
DOYEN 17 cm 6 3 /4” SEMB 33729-01
Page 87 and 88:
33745-19 18,5 cm, 7 1 /4” 10 mm 1
Page 89 and 90:
ADSON 17 cm, 6 3 /4” 7 mm CREGO 3
Page 91 and 92:
WATSON-CHEYNE 33765-17 17,5 cm, 7
Page 93 and 94:
HOHMANN 33803-43 43 mm HOHMANN 3380
Page 95 and 96:
44 mm VERBRUGGE-MÜLLER 33814-44 33
Page 97 and 98:
33812-16 16 cm, 6 1 /4“ Hohmann M
Page 99 and 100:
LANE TRETHOWAN 33828-21 21,5 cm 8 1
Page 101 and 102:
SMILLIE 33910-17 17 cm, 6 3 /4” L
Page 103 and 104:
Sehnenfassinstrumente, Sehnenstripp
Page 105 and 106:
34101-02 Pumpe Air Pump Bomba de ai
Page 107 and 108:
34160-00 komplett complete completo
Page 109 and 110:
34241-00 Griff allein Handle only M
Page 111 and 112:
34296-25 Schnellkupplungs-T-Handgri
Page 113 and 114:
1,5 mm 34330-15/38 1,5 mm 34330-15/
Page 115 and 116:
34439-00 Tel. +49-74 62- 94 45-0 ·
Page 117 and 118:
34480-01 Tel. +49-74 62- 94 45-0 ·
Page 119 and 120:
14 mm 17 mm 34515-01 KIRSCHNER 3451
Page 121 and 122:
DEMEL 27 cm, 10 1 /2” Fig. 1 3452
Page 123 and 124:
PIN PULLER 34536-03 14 cm, 5 1 /2
Page 125 and 126:
34540-01 34540-02 17 cm, 6 3 /4”
Page 127 and 128:
soft wire 1,5 mm hard wire 1,0 mm 3
Page 129 and 130:
34557-30 30 cm, 11 3 /4” 34557-25
Page 131 and 132:
KÜNTSCHER 26 cm, 10 1 /4” 34570-
Page 133 and 134:
LANE 34620-25 25 cm, 10” Schraube
Page 135 and 136:
34636-10 34634-40 T-Handgriff mit K
Page 137 and 138:
LANE 34640-18 18 cm, 7” Biegehebe
Page 139 and 140: 34805-45 Large Countersink for 4.5
Page 141 and 142: 34822-15 Mini Drill Sleeve for 1.1
Page 143 and 144: 34827-27 Insert Drill Sleeve 2.7 /
Page 145 and 146: 34830-45 Neutral and Load Drill Gui
Page 147 and 148: Chisel Guide 34860-00 8 cm, 3 1 /4
Page 149 and 150: 3,5 mm 34874-35 4,5 mm 34874-45 7,0
Page 151 and 152: Tel. +49-74 62- 94 45-0 · Fax +49-
Page 153 and 154: 37074-00 Impactor-Extractor 37075-0
Page 155 and 156: Coupling Device Complete View Coupl
Page 157 and 158: Guide Sleeve Long Complete View 25
Page 159 and 160: 37300-00 Meßlehre / Meassuring Dev
Page 161: Gigli Saw 41092-30 30 mm 41092-40 4
Page 164 and 165: 1/2
Page 166 and 167: Minifragments Cortical Screws 2.0 m
Page 168 and 169: Small fragments Cortical Screws 3.5
Page 170 and 171: Cancellous Screws 4.0 mm Spongiosa
Page 172 and 173: Large fragments Cortical Screws 4.5
Page 174 and 175: Cancellous Screws 6.5 mm Spongiosas
Page 176 and 177: Cancellous Screws 2.7 mm Durchbohrt
Page 184 and 185: Herbert Screw Hand system Herbert S
Page 186 and 187: Interference screws, cannulated wit
Page 188 and 189: Washers for screws Unterlagscheibe
Page 192 and 193: Broad lengthening Plate 4.5 mm with
Page 194 and 195: Broad Plate 4.5 mm Großfragment 1/
Page 196 and 197: Narrow plate 3.5 mm Schmale Platten
Page 198 and 199: Semi-Tubular Plate 4.5 mm Halbrohrp
Page 200 and 201: Mini Fragment plate 2.7 mm Minifrag
Page 202 and 203: Reconstruction Plate 4.5 mm Rekonst
Page 208 and 209: Y - Fork Plate 4.5 mm Y - Gabelplat
Page 210 and 211: Epicondylar Plate 3.5 mm Epi-Kondyl
Page 212 and 213: Proximal Humerus Plate 4.5 mm Proxi
Page 214 and 215: T - Plate 4.5 mm T - Platte 4.5 mm
Page 216 and 217: L - Plate 4.5 mm L - Platte 4.5 mm
Page 218 and 219: Cloverleaf Plate 3.5 mm Kleeblattpl
Page 220 and 221: Small T - Plate, oblique 3.5 mm Sch
Page 222 and 223: Small T-plate 3.5 mm straight Schma
Page 224 and 225: Quarter Tubular plate 2.7 mm Vierte
Page 226 and 227: Cervical Spine H - Plate 2.7 mm Hal
Page 228 and 229: Cobra Head Plate 4.5 mm Kreuzplatte
Page 230 and 231: Lateral Tibial Head Buttress Plate
Page 232 and 233: Lateral Proximal Tibia Plate 4.5 mm
Page 234 and 235: Fibular Distal Plate 4.5 mm Distale
Page 236 and 237: Proximal Femur Plate 4.5 mm Proxima
Page 238 and 239: Mini Fragment Plate 2.0 mm Minifrag
Page 240 and 241:
Angle stable 4 hole plates, right,
Page 242 and 243:
Calcaneal plate for screws 3.5 mm /
Page 244 and 245:
Condylar Plate 95º for Adults Kond
Page 246 and 247:
3/4 Section of angled blade plates
Page 248 and 249:
3/6 Section of angled blade platesf
Page 250 and 251:
DHS Plate DHS Platte Plaque de DHS
Page 252 and 253:
DCS Plate 95º DCS Platte 95º Plaq
Page 254 and 255:
3/12 Jewett Plate Jewett Platte Clo
Page 256 and 257:
4/2 Length mm Section of tibial int
Page 258 and 259:
4/4 Locking Screw Ref. No Stainless
Page 260 and 261:
Femur Küntscher intramedullary Nai
Page 262 and 263:
Ender Type Flexible Femoral intrame
Page 264 and 265:
Rush type intramedullary pin Hakenf
Page 266 and 267:
Schanz Screws Schanz’sche Schraub
Page 268 and 269:
4/14 Section of Steinmann type intr
Page 270 and 271:
4/16 Section of Steinmann type intr
Page 272 and 273:
4/18 Section of Steinmann medullary
Page 274 and 275:
Steinmann pin, trocar point with 15
Page 276 and 277:
Steinmann pin, lance point with 15
Page 278 and 279:
4/24 Section of Kirschner medullary
Page 280 and 281:
Page 282 and 283:
4/28
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Section of Kirschner wire system Te
Page 290 and 291:
Blount Staples Blount-klammern Agra
Page 293 and 294:
Basisinstrumentensatz für Schraube
Page 295 and 296:
Basic Instrument Set for Screws and
Page 297 and 298:
Steel Screw Set Cortex Screw Large
Page 299 and 300:
Titanium Screw Set Cortex Screw pcs
Page 301 and 302:
Broad and Narrow Plates Set Set / 3
Page 303 and 304:
Broad and Narrow Plates Set Set / 3
Page 305 and 306:
Small Fragment Instrument and Steel
Page 307 and 308:
Small Fragment Instrument and Titan
Page 309 and 310:
Mini Instrument and Steel Implant S
Page 311 and 312:
Mini Instrument / Titanium Implant
Page 313 and 314:
Standard Instrument Set for Dynamic
Page 315 and 316:
Dynamic Hip Screw Standard Implant
Page 317 and 318:
Dynamic Condylar Standard Implant S
Page 319 and 320:
Küntscher Instrumentation Set Set
Page 321 and 322:
Implant Set for Intramedullary Glid
show all

Orthopedic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?