Orthopedic

Section of anatomical bone plates for operation on distal tibia
3.00
Tel. +49-74 62- 94 45-0 · Fax +49-74 62 - 94 45-20
info@reda-instrumente.de · www.reda-instrumente.de
Distal Tibia Plate 4.5 mm
Distale Tibiaplatte 4.5 mm
Plaque pour tibia distal 4.5 mm
Indication: Anatomical distal tibia
bone plates are designed to be used
for reducing fractures of the distal
tibia.It is designed to sit on the distal
aspect of the tibia The anatomical
bone plate features show the following
important factors to osteosynthesis
as; permit a stable fixation
of the small proximal and distal
fragments. They consider the various
physiological stability factors of distal
spongiosa and meta-to diaphyseal
fractures. They are curved and
twisted to conform to the nature
shape of the proximal and distal
bones areas. They simplify reduction
in case of extended fractures as their
anterior surface is contoured to
minimize tissue irritation.
Plate details: To conform to the
ventro-tibial contours of the distal
tibia, the plate is twisted and curved
an has a concav surface on its bone
side and broadened distal end. The
pre-form shape of the plate requires
that a separate plate to be used for
right and left tibia.
Ref. No
Stainless Steel
ROT-241080-05 R
ROT-241122-07 R
ROT-241158-09 R
ROT-241194-11 R
ROT-241230-13 R
ROT-241086-05 L
ROT-241122-07 L
ROT-241158-09 L
ROT-241194-11 L
ROT-241230-13 L
Plate thickness: 3.0 mm
Plate width: 17.0 mm
Head width: 24.5 mm
Hole spacing: 18.0 mm
Screws to be used: Head of plate
accept 6.5 mm cancellous screws.
Plate shaft accepts 4.5 mm cortical
screws. The screw holes into distal
and are placed so as to allow
cancellous screw to be placed in
different directions. Two small holes
at the very end of the plate are for
temporary fixation with kirschner
wires. An oval hole in the proximal
part of the plate permit fixation with
an excentrically or medially placed
cortical screw while allowing enough
room for application of a compression
device.
Material: Certified Stainless Steel
according to ASTM F.138 - ISO
5832/1.
In Titanium on request.
Style
Right
Right
Right
Right
Right
Left
Left
Left
Left
Left
Holes
5
7
9
11
13
5
7
9
11
13
Length
mm
80
122
158
194
230
86
122
158
194
230
2/43