Orthopedic

Fibular Distal Plate 4.5 mm
Distale Fibulare Tibiaplatte 4.5 mm
Plaque pour perone distal 4.5 mm
Indication: Anatomical fibular distal
tibia bone plates are designed to be
used for reducing fractures of the
distal tibia. These plates are indicated
where the shape of the fracture or
soft tissue problems do not make
plate attachment to the medial tibial
surface advisable. The anatomical
bone plate features show the
following important factors to osteosynthesis
as; permit a stable fixation
of the small proximal and distal
fragments. They consider the various
physiological stability factors of
distal spongiosa and meta-to
diaphyseal fractures. They are curved
and twisted to conform to the nature
shape of the proximal and distal
bones areas. They simplify reduction
in case of extended fractures as
their anterior surface is contoured to
minimize tissue irritation.
Plate details: To conform to the
ventro-tibial contours of the fibular
distal tibia, the plate is twisted and
curved and and has a concave surface
Ref. No
Stainless Steel
ROT-244122-07 R
ROT-244158-09 R
ROT-244194-11 R
ROT-244230-13 R
ROT-244122-07 L
ROT-244158-09 L
ROT-244194-11 L
ROT-244230-13 L
In Titanium on request.
2/46
Style
Right
Right
Right
Right
Left
Left
Left
Left
Holes
7
9
11
13
7
9
11
13
Section of anatomical bone plates for operation on distal tibia
on its bone site and broadened distal
end. The pre-formed shape of the
plate requires that a separate plate to
be used for right and left tibia.
Plate thickness: 3.0 mm
Plate width: 17.0 mm
Head width: 24.5 mm
Hole spacing: 18.0 mm
Screws to be used: Head of plate
accept 6.5 mm cancellous screws.
Plate shaft accepts 4.5 mm cortical
screws. The screw holes into distal
and are placed so as to allow
cancellous screw to be placed in
different directions. Two small holes
at the very end of the plate are for
temporary fixation with kirschner
wires. An oval hole in the proximal
part of the plate permit fixation with
an excentrically or medially placed
cortical screw while allowing enough
room for application of a compression
device.
Material: Certified Stainless Steel
according to ASTM F.138 - ISO
5832/1.
Length
mm
122
158
194
230
122
158
194
230
Tel. +49-74 62- 94 45-0 · Fax +49-74 62 - 94 45-20
info@reda-instrumente.de · www.reda-instrumente.de