MHD56209 Jib Cranes.pdf - ToolSmith

9. Tighten clamps at one end of cable.
10. At opposite end of cable thread excess cable through clamps
increasing tension until cable can support the weight of the
trolleys and electrical cable.
11. Tighten clamp (92).
12. Connect electrical supply and test handling device.
Testing
Prior to initial use, all new, altered or repaired Jib Cranes shall be
tested to ensure proper operation.
1. Check Jib Crane movement through full operational range.
Ensure movement is smooth and without binding. Ensure
there are no obstructions through the operation range.
2. Install lifting device to be used. Check position and power
connections.
3. Check operation of lifting device. Ensure lifting device
responds correctly to control operation.
20 MHD56209 - Edition 2