SERIES V & T VALVES AIR VALVES FOR ... - Versa Valves

V-20
2
WAY VALVES 2/2
Two-Way Valves are on-off valves. They are supplied with an inlet and an
outlet port that is either normally closed or normally open to the inlet in the
unactuated position. Two-Way Valves are usually used to open or close a
pressure line such as in applications involving spraying, air ejection, clearing
chips, powering an air motor or operating the pilot of bleed-pilot valves.
NOMINAL PRESSURE RANGE ACTUATION
(Consult pressure rating chart on page V-3.3
for specific pressure rating of each valve.)
Series “V”: partial vacuum to 200 psi (14 bar) pneumatic
Series “T”: 0-500 psi (35 bar) hydraulic
BODY TYPES:
18
MANUAL, MECHANICAL, PILOT
or SOLENOID-PILOT
All Series “V” & “T” Two-Way Valves are available in the two body types
described below. Actuators used with either body type are completely
interchangeable.
SIDE-PORTED SUB-PLATE MOUNTING
The side-ported body provides threaded The Sub-plate mounting valve is shown mounted
ports in the body of the valve. on an individual sub-plate. See page V-25.1 for
details on the sub-plate.
PORT SIZES: 1/8, 1/4, 3/8, 1/2, 3/4, and 1 NPT PORT SIZES: 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1-1/4 NPT and G
1/8, 1/4, 3/8, and 1/2 G