Catalog - Delphi

Application Tooling
Delphi Flex-Guard Conduit Cutter:
This versatile machine is designed for use both as a
production line machine and for bulk conduit cutting
operations.
For production line operations:
• With machine modifi cations, will cut up to
three different lengths of conduit in any
pre-determined sequence.
For bulk cutting operations:
• Will cut as many as 99,999 pieces of conduit
of the same length in one continuous
operation.
This cutter requires both electrical and pneumatic
connections.
Specifi cations:
Overall height: 1854mm (73 inches)
Overall width: 787mm (31 inches)
Overall depth: 330mm (13 inches)
Power Requirements:
Electrical-440 volt, 60 cycle AC, 110 volt may
be requested.
Delphi Automatic Cable Seal Applicator:
This tool is designed to automatically apply cable seals from
a continuous mylar carrier strip onto unstripped cable. Cable
may range in size from 0.22mm2 gauge (thin wall) to 5.0mm2 gauge (heavy wall).
This applicator is designed for use on automatic cable
processing equipment.
10.4
Tooling
Application Tooling
No progression
adjustment
Quick change
tooling
Effi cient
NOTE: Specifi cations in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com
Cuts various
lengths
Versatile
Easy to operate