Ramsey MINI CK101 Weight Integrator - Hoferick Engineering GmbH

More documents

Recommendations

Info

To change I/O data length The instrument gives the possibility to define the write and read buffer dimensions. Default values are 48 words for both, if the user changes them he should also modify the GSD file so that the configuration in the instrument setup and in the file corresponds. To make it is easy. The GSD file should be edited with a normal text editor and the value at the directive ‘module =’ at the bottom of the file should be changed. It normally appears as follows: Module = "MINICK101" 0xC0,0x6F,0x6F The first value (0xC0) should be left unchanged, the second value specifies the dimension of the write buffer, the third of the read buffer. The value to set should be computed as follows: where: Read_Buffer_Dim = 63 + RBD Write_Buffer_Dim = 63 + WBD RBD is the read buffer dimension defined in the instrument setup. WBD is the write buffer dimension defined in the instrument setup. The value should be then converted and written in hexadecimal notation. The meaning of the default values 0x6F is: 6F hex = 111 dec = 63 + 48 48 is the default dimension of the buffers. Instruction are also contained in the GSD file. 54 - 56
Follows the contents of the Ramsey MINICK101 GSD file. R_MINICK101.GSD : #Profibus_DP GSD_Revision = 1 ; Vendor_Name = "Ramsey" Model_Name = "MINICK101 Revision = "Rev.A” Ident_Number = 0x2105 Protocol_Ident = 0 Station_Type = 0 FMS_supp = 0 Hardware_Release = "Rev.A" Software_Release = "86.GSD.01" ; 9.6_supp = 1 19.2_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp = 1 12M_supp = 1 ; MaxTsdr_9.6 = 60 MaxTsdr_19.2 = 60 MaxTsdr_93.75 = 60 MaxTsdr_187.5 = 60 MaxTsdr_500 = 100 MaxTsdr_1.5M = 150 MaxTsdr_3M = 250 MaxTsdr_6M = 450 MaxTsdr_12M = 800 ; Redundancy = 0 Repeater_Ctrl_Sig = 0 24V_Pins = 0 Implementation_Type = "ifak" Bitmap_Device = "dev.dib" Bitmap_Diag = "diag.dib" Bitmap_SF = "sf.dib" ; Freeze_Mode_supp = 0 Sync_Mode_supp = 0 Auto_Baud_supp = 1 Set_Slave_Add_supp = 0 Min_Slave_Intervall = 12 ; 55 - 56
Page 1 and 2:
MINI CK101 Part No.: Pbus Ramsey MI
Page 3 and 4: INDEX About this manual ...........
Page 5 and 6: 1. PROFIBUS OVERVIEW 1.1 Introducti
Page 7 and 8: ───────────
Page 9 and 10: Write operations - Multiple registe
Page 11 and 12: same frequency the instrument updat
Page 13 and 14: 3 REGISTERS LIST 3.1 Description of
Page 15 and 16: Register Type Display (20) Display
Page 17 and 18: Language Register Type Time Format
Page 19 and 20: Register Type Weight Load Cell Zero
Page 21 and 22: Register Type Low rate delay Low ra
Page 23 and 24: Register Type Low Limit High Limit
Page 25 and 26: meanings, when the bit is 1 the ass
Page 27 and 28: O1.00 output 1 - mother board Comma
Page 29 and 30: 29 - 56
Page 31 and 32: 3.3.3 Display Data Units Code of th
Page 33 and 34: Speed Damping The Value in seconds
Page 35 and 36: Load Cell Sensitivity The value in
Page 37 and 38: Test Duration The value in engineer
Page 39 and 40: UNITS Feet Meters MAX 10000 300 MIN
Page 41 and 42: 3.3.8 Alarms Rate deviation opt. En
Page 43 and 44: 3.3.10 Profibus Settings Address Ad
Page 45 and 46: 45 - 56
Page 47 and 48: EXAMPLE 2 - READ HOLDING REGISTER T
Page 49 and 50: MULTIPLE REGISTERS QUERY RESPONSE M
Page 51 and 52: 1.101 (bin) This number can be repr
Page 53: APPENDIX B INSTRUMENT CONFIGURATION
show all

Ramsey MINI CK101 Weight Integrator - Hoferick Engineering GmbH

Create successful ePaper yourself

Delete template?

Save as template?