Torque Control. - Matador
Torque Control. - Matador
Torque Control. - Matador
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.1 TORQUE WRENCHES<br />
Full equipment as a standard.<br />
The Allrounder for every case of application.<br />
<br />
2 scales for rough and fine adjustment<br />
with magnifier (N·m and lbf·ft).<br />
Be a MATADOR.<br />
Robust powder coated steel pipe body<br />
for long-lasting corrosion protection.<br />
Simple adjustment at the<br />
end of the handle.<br />
By simply pulling and pushing the<br />
locking knob at the end of the handle<br />
using the ergonomic finger recesses<br />
the torque wrench can be unlocked<br />
and locked.<br />
With safety lock.<br />
By turning the handle the desired<br />
torque value can be set. A black<br />
ring inside the locking knob indicates<br />
that the torque wrenches is still<br />
unlocked.<br />
Tested according to<br />
DIN EN ISO 6789.<br />
On all torque wrenches an individual<br />
serial number is imprinted irreversibly.This<br />
number serves as a distinct<br />
product identification. Each<br />
torque wrench is supplied with a<br />
MATADOR factory calibration certificate<br />
according to DIN EN ISO 6789.<br />
In case of service MATADOR torque<br />
wrenches are maintained, calibrated<br />
and adjusted according to DIN<br />
EN ISO 6789 within 5 working days<br />
after receipt in stock, including factory<br />
calibration certificate and test<br />
badge.<br />
Trust, but verify.<br />
Quick adjustment of the desired<br />
torque value by pulling<br />
and pushing the locking knob<br />
at the end of the handle.<br />
Handy and ergonomic<br />
2-component-handle for safe<br />
and effortless working.<br />
With serial number and<br />
factory calibration certificate.<br />
www.matador.de 13