Torque Control. - Matador

More documents

Recommendations

Info

6182 Art. Code mm (") mm (") Nm lbfft Nm lbfft mm h mm l mm kg 6182 0030 20,0 (3/4) 25,0 (1) 3500 2582 1:4,5 770 568 108 130 264 7,3 1 Simple operation in 6 steps. Without strain and electronic devices. 1 2 3 <strong>Torque</strong> Multiplier 3.500 Nm Define target output torque and choose the right torque multiplier (capacities 1,500 - 9,500 N·m). Calculate input torque according to ratio (here 1/5th of required torque) and set torque wrench - never exceed the maximum input torque: Example: Target output torque: 1.500 Nm Ratio: 1:5 = Input torque: 300 Nm Assemble socket on output square of multiplier (Caution: only use impact sockets with safety pin and ring due to high tension, do not use an extra-long socket or an extension). 3.3 TORQUE MULTIPLIERS – Universal torque multiplier for up to 3.500 Nm – For maximum torque multiplication without electric or pneumatic devices – With precision planet gear for high efficiency – Effective gear ratio 1:4,5, no conversion necessary – Multiplication accuracy according to DIN ISO 6789 / ASME B107.14M-1994 better than ±5% – Low maintenance, with lifetime lubrication – Including permanently welded reaction plate and sliding reaction square in 25 mm (1") which can be fixed to an adjacent screw together with an impact socket – With overload protection through input square for protecting the gear box, including spare square – In sturdy metal case 30 www.matador.de High quality tools and more since 1900. 4 5 6 Material: special steel Surface: manganese phosphated Place multiplier on the fastener and choose a suitable reaction point . Caution: Check if multiplier is rotating in the right direction - reaction point must be stable! Now tighten until you hear the click. Do not overload the multiplier. After the multiplier is locked on: Do not strike the anti wind-up ratchet. Reverse the direction of the wind-up ratchet and untighten with the torque wrench until multiplier can be unlocked.
3.3 TORQUE MULTIPLIERS For heavy industries and high torque demands. The performance class. 4.500 - 9.500 Nm. With anti-wind-up ratchet, eliminate backlash of the operating tool and facilitate unlocking. Ball-bearing precision planet gear for high efficiency and transmission without correction factors. – For heavy duty industrial screw connections – Output torque between 4.500 and 9.500 Nm depending on them model – Usable in most confined spaces, operated simply with short torque wrench (up to 365 Nm) – Maximum torque multiplication without additional devices – With precision planet gear for high efficiency – Effective gear ratio 1:20 and 1:26, no conversion necessary – Multiplication accuracy according to DIN ISO 6789 / ASME B107.14M-1994 better than ±5% – Low maintenance, with lifetime lubrication – With anti-wind-up ratchet – Including reaction arm (starting from 6.000 Nm additionally with adjustable support device) – With overload protection (input square, starting from 6.000 Nm secured with pin and ring, including spare square and pin) – In sturdy metal case Material: special steel Surface: manganese phosphated Art. Code mm (") mm (") Nm lbfft Ratio Nm lbfft mm h mm l mm kg 6182 0040 12,5 (1/2) 40,0 (1.1/2) 4500 3319 1:20 225 166 120 204,8 312 8,3 1 6182 0050 12,5 (1/2) 40,0 (1.1/2) 6000 4425 1:26 230 170 130 216,3 328 15,7 1 6182 0060 12,5 (1/2) 40,0 (1.1/2) 9500 7007 1:26 365 269 184 214,9 505 30,3 1 Be a MATADOR. Input square drive 12,5 mm (1/2“) for standard torque wrenches. Reaction arm with adjustable support device (models 6182 0050/0060). <strong>Torque</strong> Multipliers 4.500 - 9.500 Nm 6182 ¬ Model 6182 0040 ¬ Model 6182 0050 ¬ Model 6182 0060 www.matador.de 31
Page 1 and 2: Be a MATADOR. High quality tools an
Page 3 and 4: 3. TORQUE CONTROL Torque = Force x
Page 5 and 6: 3.1 TORQUE WRENCHES Optimal clamp f
Page 7 and 8: 3.1 TORQUE WRENCHES Reduction to th
Page 9 and 10: 3.1 TORQUE WRENCHES - Ideal for rec
Page 11 and 12: 3.1 TORQUE WRENCHES Absolutely erro
Page 13 and 14: 3.1 TORQUE WRENCHES Full equipment
Page 15 and 16: 3.1 TORQUE WRENCHES - Suitable for
Page 17 and 18: 3.1 TORQUE WRENCHES - For angle-con
Page 19 and 20: 3.1 TORQUE WRENCHES Documented cont
Page 21 and 22: Torque Testers. 3.1 TORQUE WRENCHES
Page 23 and 24: 3.2 INSERT TOOLS - With pin lock -
Page 25 and 26: 3.2 INSERT TOOLS - With pin lock -
Page 27 and 28: Torque Multipliers. 3.3 TORQUE MULT
Page 29: 3.3 TORQUE MULTIPLIERS More power w

Torque Control. - Matador

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?