Torque Control. - Matador
Torque Control. - Matador
Torque Control. - Matador
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6182<br />
Art. Code mm (") mm (") Nm lbfft Nm lbfft mm h mm l mm kg<br />
6182 0030 20,0 (3/4) 25,0 (1) 3500 2582 1:4,5 770 568 108 130 264 7,3 1<br />
Simple operation in 6 steps.<br />
Without strain and electronic devices.<br />
1<br />
2<br />
3<br />
<strong>Torque</strong> Multiplier 3.500 Nm<br />
Define target output torque and choose<br />
the right torque multiplier<br />
(capacities 1,500 - 9,500 N·m).<br />
Calculate input torque according to ratio<br />
(here 1/5th of required torque) and set<br />
torque wrench - never exceed the maximum<br />
input torque:<br />
Example:<br />
Target output torque: 1.500 Nm<br />
Ratio: 1:5<br />
= Input torque: 300 Nm<br />
Assemble socket on output square of<br />
multiplier (Caution: only use impact sockets<br />
with safety pin and ring due to high<br />
tension, do not use an extra-long socket<br />
or an extension).<br />
3.3 TORQUE MULTIPLIERS<br />
– Universal torque multiplier for up to 3.500 Nm<br />
– For maximum torque multiplication without electric or pneumatic devices<br />
– With precision planet gear for high efficiency<br />
– Effective gear ratio 1:4,5, no conversion necessary<br />
– Multiplication accuracy according to DIN ISO 6789 / ASME B107.14M-1994<br />
better than ±5%<br />
– Low maintenance, with lifetime lubrication<br />
– Including permanently welded reaction plate and sliding reaction square<br />
in 25 mm (1") which can be fixed to an adjacent screw together with an<br />
impact socket<br />
– With overload protection through input square for protecting the gear box,<br />
including spare square<br />
– In sturdy metal case<br />
30 www.matador.de<br />
High quality tools and more since 1900.<br />
4<br />
5<br />
6<br />
Material: special steel<br />
Surface: manganese phosphated<br />
Place multiplier on the fastener and<br />
choose a suitable reaction point .<br />
Caution:<br />
Check if multiplier is rotating in the right<br />
direction - reaction point must be stable!<br />
Now tighten until you hear the click.<br />
Do not overload the multiplier.<br />
After the multiplier is locked on:<br />
Do not strike the anti wind-up ratchet.<br />
Reverse the direction of the wind-up<br />
ratchet and untighten with the torque<br />
wrench until multiplier can be unlocked.