Lenze G-Motion Gear Motors - CTi Automation

More documents

Recommendations

Info

1 Y Cross-reference Y Result General Notes on ordering 1. Dimension the drive system Y Drive dimensioning, dimensioning (chapter 2) 2. Specify the type designation, input speed, rated frequency and ratio. Y Product key (fold-out page), selection table (chapters 3 to 7) Y Rated frequency Example: 50 Hz Y Gearbox type, gearbox size, number of stages Example: GST 07-2 Drive design, motor frame size, drive size, ratio Example: M, 090C32, i=56,250 3. Specify the output design. Y Product key (fold-out page), drive dimensioning, gearbox designs (chapter 2) Y Solid shaft with keyway, without foot, with centring, with round flange 200 mm Example: (V, C, K) 4. Specify the mounting position and the position of the system blocks. Y Product key (fold-out page) Example: Mounting position A Terminal box in position 2 5. Specify the colour Y Drive dimensioning, gearbox designs (chapter 2) Example: Paint RAL 7012 (basalt grey) 6. Specify the gearbox options Y Drive dimensioning, gearbox designs (Chapter 2) 7. Specify the motor options. Y Drive dimensioning, motor designs (Chapter 2) 1-8 G-motion const en 7/2006 CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
G-motion const en 7/2006 Quantity i = G S T 0 7 Other ordering data Mounting position Position of system blocks (mark non-fixed positions with 0) Colour GST 03 Options Special lubricant - GST 04...14 Special paint RAL Output shaft bearing Shaft sealing rings Gearbox with mounting flange GST 03...14 - 1...3N Ventilation 1 X 2 3 X 56,250 M N W a X B C D E F Terminal boxes 2 X 3 4 5 X n 1 = rpm Not painted (aluminium housing) X a General Example order B X k V 0 9 0 C 3 2 Paint RAL 7012 (basalt grey) Grey primer C Rated frequency CLP HC 320 (synthetic) CLP HC 220 USDA H1 (for the food and beverages industry) Reinforced bearings for GST 04...09 - 2 Viton X 50 Hz 60 Hz R L 200 Solid shaft d = (only on GST03) mm Flange a2 = mm Grey primer (only on GST 03) Clamping hub Clamping ring hub Motor frame size (M) Drive size (N, W) Breather elements for compensation reservoir in mounting position C for GST 05...07 GST 09...14 For order data concerning motor options, please refer to the motor options on the fax order form CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net 1-9 1
Page 1 and 2: G-motion const Geared motors G-moti
Page 3 and 4: Product key Geared motors Type desi
Page 5 and 6: We can offer you automation solutio
Page 7 and 8: 9300 servo inverter 9300 vector fre
Page 9 and 10: G-motion servo MC/MD Dynamic geared
Page 11 and 12: Contents G-motion const Product key
Page 13 and 14: G-motion const en 7/2006 General G-
Page 15 and 16: Helical geared motors GST 0.06 to 4
Page 17 and 18: [°] Angle of action of radial forc
Page 19: We aim to process your order quickl
Page 23 and 24: Customer no. G S T Other ordering d
Page 25 and 26: Customer no. G K R - 2 Other orderi
Page 27 and 28: Customer no. G S S Other ordering d
Page 29 and 30: G-motion const en 7/2006 CTi Automa
Page 31 and 32: Drive dimensioning G-motion const D
Page 33 and 34: Torque derating for 4-pole motors T
Page 35 and 36: Operating mode S1 G-motion const en
Page 37 and 38: Gearbox efficiency Site altitude kh
Page 39 and 40: Drive dimensioning Dimensioning Dut
Page 41 and 42: G-motion const en 7/2006 q [J] Driv
Page 43 and 44: Additional radial force factors of
Page 45 and 46: GSS 05-2 G-motion const en 7/2006 D
Page 51 and 52: Moments of inertia for helical gear
Page 53 and 54: Moments of inertia for shaft-mounte
Page 55 and 56: Moments of inertia for bevel gearbo
Page 57 and 58: Moments of inertia for helical-beve
Page 59 and 60: Moments of inertia for drive design
Page 61 and 62: Basic designs Gearbox type Gearbox
Page 63 and 64: Gearbox with mounting flange design
Page 65 and 66: Gearbox with mounting flange design
Page 67 and 68: Gearbox with ventilation Gearbox si
Page 69 and 70: General data Drive dimensioning Mot
Page 71 and 72:
Options (note possible combinations
Page 73 and 74:
Configuration aid Drive dimensionin
Page 75 and 76:
G-motion const en 7/2006 Helical ge
Page 77 and 78:
GST òò-1 Technical data - Helical
Page 79 and 80:
GST òò-1 Verdrehspiel Output back
Page 81 and 82:
Technical data - Helical gearboxes
Page 83 and 84:
On the designs listed in the table,
Page 85 and 86:
GSTòò - 1M G-motion const en 7/20
Page 87 and 88:
GSTòò - 1N G-motion const en 7/20
Page 89 and 90:
GSTòò - 1W G-motion const en 7/20
Page 91 and 92:
G-motion const en 7/2006 CTi Automa
Page 93 and 94:
P1 = 0.12 kW P1 = 0.15 kW 12 89 1.9
Page 95 and 96:
P1 = 0.25 kW P1 = 0.31 kW 140 17 4.
Page 97 and 98:
P1 = 0.37 kW P1 = 0.45 kW 141 24 2.
Page 99 and 100:
P1 = 0.55 kW P1 = 0.68 kW 192 27 2.
Page 101 and 102:
P1 = 0.75 kW P1 = 0.92 kW 220 32 1.
Page 103 and 104:
P1 = 1.1 kW P1 = 1.3 kW 268 38 1.3
Page 105 and 106:
P1 = 1.5 kW P1 = 1.8 kW 399 35 3.0
Page 107 and 108:
P1 = 2.2 kW P1 = 2.6 kW 643 32 1.6
Page 109 and 110:
P1 = 2.2 kW P1 = 2.6 kW 5.4 3749 1.
Page 111 and 112:
P1 = 3.0 kW P1 = 3.6 kW 11 2494 2.4
Page 113 and 114:
P1 = 4.0 kW P1 = 4.8 kW 24 1518 1.0
Page 115 and 116:
P1 = 5.5 kW P1 = 6.6 kW 37 1381 1.6
Page 117 and 118:
P1 = 9.0/9.2 kW P1 = 11.0 kW 930 93
Page 119 and 120:
P1 = 11.0 kW P1 = 13.2 kW 28 3654 1
Page 121 and 122:
P1 = 22.0 kW P1 = 26.4 kW 188 1085
Page 123 and 124:
Page 125 and 126:
For dimensions, see page 3-162 onwa
Page 127 and 128:
Page 129 and 130:
M2 perm ^ 73 Nm GST04-2N òòò 50
Page 131 and 132:
M2 perm ^ 73 Nm GST04-2N òòò 50
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
M2 perm ^ 172 Nm GST05-3W òòò 50
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Gearbox Gearbox size o* o 1 p* h* a
Page 221 and 222:
Helical gearbox dimensions Geared m
Page 223 and 224:
Gearbox Solid shaft Output flange s
Page 225 and 226:
Geared motor GSTòò-2M VBR Motor G
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Geared motor GSTòò-3M VBR Motor G
Page 233 and 234:
Geared motor GSTòò-3M VCR Motor G
Page 235 and 236:
Geared motor GSTòò-3M VCK Motor G
Page 237 and 238:
Gearbox GSTòò-1N VBR Housing k 1
Page 239 and 240:
Gearbox GSTòò-1N VCR Housing k 1
Page 241 and 242:
Gearbox GSTòò-1N VCK Housing k 1
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Gearbox GSTòò-2N VCK G-motion con
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Gearbox GSTòò-3N VCK G-motion con
Page 255 and 256:
Gearbox GSTòò-2N òòò Housing k
Page 257 and 258:
Gearbox Drive size 1A 1B 1C 1D 1E 1
Page 259 and 260:
Gearbox Drive size GSTòò-3W òò
Page 261 and 262:
Output design VAL Helical gearbox d
Page 263 and 264:
Shaft-mounted helical gearbox (low-
Page 265 and 266:
VCK Technical data - Shaft-mounted
Page 267 and 268:
GFL òò-2 Output backlash 14' Verd
Page 269 and 270:
GFL Technical data - Shaft-mounted
Page 271 and 272:
Technical data - Shaft-mounted heli
Page 273 and 274:
Technical data - Shaft-mounted heli
Page 275 and 276:
50 Hz 60 Hz Shaft-mounted 50 Hz 60
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Shaft-mounted helical gearbox selec
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
G-motion const en 7/2006 Shaft-moun
Page 381 and 382:
Page 383 and 384:
Shaft-mounted helical gearbox dimen
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Gearbox GFLòò-3N òòò Housing k
Page 413 and 414:
Gearbox Drive size GFLòò-3W òò
Page 415 and 416:
Hollow shaft with shrink disc G-mot
Page 417 and 418:
Pitch circle in position 4 G-motion
Page 419 and 420:
Page 421 and 422:
Bevel gearbox G-motion const Techni
Page 423 and 424:
Hòò Technical data - Bevel gearbo
Page 425 and 426:
GKRòò-2M HòR Technical data - Be
Page 427 and 428:
Page 429 and 430:
50 Hz 60 Hz Geared motors 50 Hz 60
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
For dimensions, see page 5-40 onwar
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Geared motor Motor frame size 063 0
Page 455 and 456:
G-motion const en 7/2006 Bevel gear
Page 457 and 458:
Geared motor GKRòò-2M VòR Motor
Page 459 and 460:
Gearbox Solid shaft Output flange s
Page 461 and 462:
Gearbox GKRòò-2N HòR Housing k 1
Page 463 and 464:
Gearbox GKRòò-2N HAK Housing k 1
Page 465 and 466:
Gearbox GKRòò-2N VòR Housing k 1
Page 467 and 468:
Gearbox GKRòò-2N VAK Housing k 1
Page 469 and 470:
Hollow shaft with shrink disc G-mot
Page 471 and 472:
Hoseproof hollow shaft cover Gearbo
Page 473 and 474:
GKR 05/06 Torque plate at threaded
Page 475 and 476:
G-motion const en 7/2006 Bevel gear
Page 477 and 478:
Helical-bevel gearbox G-motion cons
Page 479 and 480:
Helical-bevel gearbox GKSòò VAK V
Page 481 and 482:
Helical-bevel gearbox GKSòò-3 Out
Page 483 and 484:
GKS 05 -3 06 -3 07 -3 -4 09 -4 Tech
Page 485 and 486:
GKSòò-3M HòR Motor frame size Ge
Page 487 and 488:
Gearbox additional weights G-motion
Page 489 and 490:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 491 and 492:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 493 and 494:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 495 and 496:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 497 and 498:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 499 and 500:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 501 and 502:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 503 and 504:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 505 and 506:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 507 and 508:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 509 and 510:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 511 and 512:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 513 and 514:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
M2 perm ^ 190 Nm GKS04-3W òòò Fo
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
M2 perm ^ 1330 Nm GKS07-3W òòò F
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
M2 perm ^ 11784 Nm GKS14-3W òòò
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Gearbox Hollow shaft Threaded pitch
Page 607 and 608:
G-motion const en 7/2006 Helical-be
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Geared motor GKSòò-4M HòR Motor
Page 615 and 616:
Geared motor GKSòò-4M HAK Motor G
Page 617 and 618:
Geared motor GKSòò-4M VòR Motor
Page 619 and 620:
Geared motor GKSòò-4M VAK Motor G
Page 621 and 622:
Gearbox GKSòò-3N HòR Housing k 1
Page 623 and 624:
Gearbox GKSòò-3N HAK Housing k 1
Page 625 and 626:
Gearbox GKSòò-3N VòR Housing k 1
Page 627 and 628:
Gearbox GKSòò-3N VAK Housing k 1
Page 629 and 630:
Gearbox GKSòò-4N HòR Housing k 1
Page 631 and 632:
Gearbox GKSòò-4N HAK Housing k 1
Page 633 and 634:
Gearbox GKSòò-4N VòR Housing k 1
Page 635 and 636:
Gearbox GKSòò-4N VAK Housing k 1
Page 637 and 638:
Gearbox GKSòò-4N òòò Housing k
Page 639 and 640:
Gearbox Drive size 1A 1B 1C 1D 1E 1
Page 641 and 642:
Gearbox with 2nd output shaft end H
Page 643 and 644:
Torque plate at threaded pitch circ
Page 645 and 646:
Page 647 and 648:
Helical-worm gearbox G-motion const
Page 649 and 650:
VAK Hòò G-motion const en 7/2006
Page 651 and 652:
G-motion const en 7/2006 Technical
Page 653 and 654:
GSS 05 -2 06 -2 07 -2 G-motion cons
Page 655 and 656:
GSSòò-2N HòR Technical data - He
Page 657 and 658:
Page 659 and 660:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 661 and 662:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 663 and 664:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 665 and 666:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 667 and 668:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 669 and 670:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 671 and 672:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 673 and 674:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 675 and 676:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 677 and 678:
n1 = 2800 rpm n1 = 3360 rpm GSS04 -
Page 679 and 680:
n1 = 700 rpm n1 = 840 rpm GSS04 - 2
Page 681 and 682:
M2 perm ^ 360 Nm GSS05-2N òòò 50
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
G-motion const en 7/2006 Helical-wo
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Geared motor GSSòò-2M HòR Motor
Page 729 and 730:
Geared motor GSSòò-2M HAK Motor g
Page 731 and 732:
Geared motor GSSòò-2M VòR Motor
Page 733 and 734:
Geared motor GSSòò-2M VAK Motor g
Page 735 and 736:
Geared motor GSSòò-3M HòR G-moti
Page 737 and 738:
Geared motor GSSòò-3M HAK G-motio
Page 739 and 740:
Geared motor GSSòò-3M VòR G-moti
Page 741 and 742:
Geared motor GSSòò-3M VAK G-motio
Page 743 and 744:
Gearbox GSSòò-2N HòR Housing k 1
Page 745 and 746:
Gearbox GSSòò-2N HAK Housing k 1
Page 747 and 748:
Gearbox GSSòò-2N VòR Housing k 1
Page 749 and 750:
Gearbox GSSòò-2N VAK Housing k 1
Page 751 and 752:
Gearbox GSSòò-3N HòR Housing k 1
Page 753 and 754:
Gearbox GSSòò-3N HAK Housing k 1
Page 755 and 756:
Gearbox GSSòò-3N VòR Housing k 1
Page 757 and 758:
Gearbox GSSòò-3N VAK Housing k 1
Page 759 and 760:
Gearbox GSSòò-3N òòò Housing k
Page 761 and 762:
Page 763 and 764:
Gearbox with 2nd output shaft end H
Page 765 and 766:
Torque plate at threaded pitch circ
Page 767 and 768:
Gearbox size 04 115 100 G-motion co
Page 769 and 770:
Motors G-motion const Technical dat
Page 771 and 772:
Page 773 and 774:
No. of pairs of poles 1 (2-pole) Mo
Page 775 and 776:
No. of pairs of poles 1 (2-pole) Te
Page 777 and 778:
Motor frame size Connection 063C02
Page 779 and 780:
Motor terminal box Technical data -
Page 781 and 782:
Motor terminal box KK1 Dimensions a
Page 783 and 784:
Motor terminal box with connector I
Page 785 and 786:
Motor terminal box with connector I
Page 787 and 788:
Motor terminal box with HAN 10E con
Page 789 and 790:
Motor terminal box with HAN 10E con
Page 791 and 792:
starttec motor starter Functions an
Page 793 and 794:
starttec motor starter Dimensions a
Page 795 and 796:
Geared motors and geared brake moto
Page 797 and 798:
Brake motors are fitted with spring
Page 799 and 800:
Rated data G-motion const en 7/2006
Page 801 and 802:
Voltages G-motion const en 7/2006 T
Page 803 and 804:
G-motion const en 7/2006 Technical
Page 805 and 806:
Built-on accessories Integral fan I
Page 807 and 808:
Built-on accessories Integral fan w
Page 809 and 810:
Built-on accessories Integral fan w
Page 811 and 812:
Built-on accessories Blower with pr
Page 813:
G-motion const en 7/2006 Dimensions
show all

Lenze G-Motion Gear Motors - CTi Automation

Create successful ePaper yourself

Delete template?

Save as template?