Lenze G-Motion Gear Motors - CTi Automation

More documents

Recommendations

Info

6 For dimensions, see page 6-144 onwards. Helical-bevel gearbox selection table Gearbox with mounting flange M2 perm ^ 1330 Nm GKS07-3N òòò 50 Hz 60 Hz 50 Hz 60 Hz Gearbox Mounting flange size i Consultation Motor frame size P1 perm M2 perm n2 P1 perm M2 perm n2 required for Flange diameter mounting [kW] [Nm] [rpm] [kW] [Nm] [rpm] position n1 = 1400 rpm n1 = 1680 rpm GKS07 - 3N òòò òE 11.378 6.60 486 123 7.62 468 148 1E 1E 2E 3E 4E 5E 17.270 6.60 738 81 7.62 711 97 100 112 90 80 90 182/184TC 25.244 6.60 1079 56 7.62 1039 67 160 160 160 160 200 Nema 28.274 6.56 1202 50 7.58 1157 59 31.858 5.68 1172 44 6.56 1129 53 36.063 5.52 1290 39 6.38 1242 47 44.178 4.54 1300 32 5.45 1300 38 50.345 3.99 1300 28 4.78 1300 33 57.501 3.52 1310 24 4.22 1310 29 64.790 2.85 1195 22 3.42 1195 26 70.474 2.89 1320 20 3.47 1320 24 79.407 2.34 1205 18 2.81 1205 21 92.563 2.22 1330 15 2.66 1330 18 104.296 1.80 1215 13 2.16 1215 16 112.338 1.83 1330 13 2.19 1330 15 126.578 1.48 1215 11 1.78 1215 13 140.548 1.46 1330 10.0 1.75 1330 12 158.364 1.18 1215 8.8 1.42 1215 11 184.600 1.11 1330 7.6 1.33 1330 9.1 208.000 0.90 1215 6.7 1.08 1215 8.1 224.037 0.92 1330 6.3 1.10 1330 7.5 252.436 0.74 1215 5.6 0.89 1215 6.7 GKS07 - 3N òòò òF 5.955 6.60 255 235 7.62 245 282 C, D 1F 1F 2F 3F 8.254 6.60 353 170 7.62 340 204 C, D 100 112 90 90 9.171 6.60 392 153 7.62 377 183 C, D 160 160 160 200 10.124 6.60 433 138 7.62 417 166 C, D 11.378 6.60 486 123 7.62 468 148 C, D 12.711 6.60 543 110 7.62 523 132 C, D 14.798 6.60 633 95 7.62 609 114 C, D 16.674 6.60 713 84 7.62 686 101 C, D 17.270 6.60 738 81 7.62 711 97 C, D 20.511 6.60 877 68 7.62 844 82 C, D 23.111 6.60 988 61 7.62 951 73 C, D 25.244 6.60 1079 56 7.62 1039 67 C, D 28.274 6.56 1202 50 7.58 1157 59 C, D 31.858 5.68 1172 44 6.56 1129 53 C, D 36.063 5.52 1290 39 6.38 1242 47 C, D 40.906 4.87 1290 34 5.62 1242 41 C, D 44.178 4.54 1300 32 5.45 1300 38 C, D 50.345 3.99 1300 28 4.78 1300 33 C, D 57.501 3.52 1310 24 4.22 1310 29 C, D 64.790 2.85 1195 22 3.42 1195 26 C, D 70.474 2.89 1320 20 3.47 1320 24 C, D 79.407 2.34 1205 18 2.81 1205 21 C, D 140.548 1.46 1330 10.0 1.75 1330 12 C, D 158.364 1.18 1215 8.8 1.42 1215 11 C, D GKS07 - 3N òòò òG 5.955 12.19 470 235 14.09 453 282 C, D 1G 2G 2G 3G 5G 8.254 10.11 540 170 11.68 520 204 C, D 132 100 112 132 213/215TC 9.171 12.19 725 153 14.09 698 183 C, D 300 250 250 250 Nema 10.124 12.19 800 138 14.09 770 166 C, D 11.378 8.32 613 123 9.61 590 148 C, D 12.711 10.11 832 110 11.68 802 132 C, D 14.798 10.85 1040 95 12.53 1001 114 C, D 16.674 9.91 1071 84 11.45 1031 101 C, D 17.270 8.92 998 81 10.31 961 97 C, D 20.511 8.35 1110 68 9.65 1069 82 C, D 23.111 7.80 1168 61 9.01 1125 73 C, D 25.244 7.20 1177 56 8.31 1133 67 C, D 28.274 6.56 1202 50 7.58 1157 59 C, D 31.858 5.68 1172 44 6.56 1129 53 C, D 36.063 5.52 1290 39 6.38 1242 47 C, D 40.906 4.87 1290 34 5.62 1242 41 C, D 44.178 4.54 1300 32 5.45 1300 38 C, D 50.345 3.99 1300 28 4.78 1300 33 C, D 6-62 G-motion const en 7/2006 CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
For dimensions, see page 6-144 onwards. G-motion const en 7/2006 Helical-bevel gearbox selection table Gearbox with mounting flange M2 perm ^ 1330 Nm GKS07-3N òòò 50 Hz 60 Hz 50 Hz 60 Hz Gearbox Mounting flange size i Consultation Motor frame size P1 perm M2 perm n2 P1 perm M2 perm n2 required for Flange diameter mounting [kW] [Nm] [rpm] [kW] [Nm] [rpm] position n1 = 1400 rpm n1 = 1680 rpm GKS07 - 3N òòò òH 5.955 12.19 470 235 14.09 453 282 C, D 1H 3H 5H 8.254 10.11 540 170 11.68 520 204 C, D 160 132 254/256TC 9.171 12.19 725 153 14.09 698 183 C, D 350 300 Nema 10.124 12.19 800 138 14.09 770 166 C, D 11.378 8.32 613 123 9.61 590 148 C, D 12.711 10.11 832 110 11.68 802 132 C, D 14.798 10.85 1040 95 12.53 1001 114 C, D 16.674 9.91 1071 84 11.45 1031 101 C, D 17.270 8.92 998 81 10.31 961 97 C, D 20.511 8.35 1110 68 9.65 1069 82 C, D 23.111 7.80 1168 61 9.01 1125 73 C, D 25.244 7.20 1177 56 8.31 1133 67 C, D 28.274 6.56 1202 50 7.58 1157 59 C, D 31.858 5.68 1172 44 6.56 1129 53 C, D 40.906 4.87 1290 34 5.62 1242 41 C, D 50.345 3.99 1300 28 4.78 1300 33 C, D n1 = 700 rpm n1 = 840 rpm GKS07 - 3N òòò òC 92.563 0.84 1010 7.6 1.01 1010 9.1 1C 2C 3C 4C 5C 6C 7C 104.296 0.84 1138 6.7 1.01 1138 8.1 80 71 71 71 56C 63 80 112.338 0.70 1024 6.2 0.84 1024 7.5 160 160 105 120 Nema 160 120 126.578 0.70 1154 5.5 0.84 1154 6.6 184.600 0.56 1330 3.8 0.67 1330 4.6 208.000 0.45 1215 3.4 0.54 1215 4.0 224.037 0.46 1330 3.1 0.55 1330 3.8 252.436 0.37 1215 2.8 0.45 1215 3.3 283.193 0.36 1330 2.5 0.43 1330 3.0 319.091 0.29 1215 2.2 0.35 1215 2.6 GKS07 - 3N òòò òD 36.063 1.54 719 19 1.85 719 23 1D 2D 5D 57.501 1.54 1147 12 1.85 1147 15 90 80 143/145TC 64.790 1.42 1195 11 1.71 1195 13 160 160 Nema 70.474 1.43 1307 9.9 1.72 1307 12 79.407 1.17 1205 8.8 1.41 1205 11 92.563 1.11 1330 7.6 1.33 1330 9.1 104.296 0.90 1215 6.7 1.08 1215 8.1 112.338 0.91 1330 6.2 1.10 1330 7.5 126.578 0.74 1215 5.5 0.89 1215 6.6 140.548 0.73 1330 5.0 0.88 1330 6.0 158.364 0.59 1215 4.4 0.71 1215 5.3 184.600 0.56 1330 3.8 0.67 1330 4.6 208.000 0.45 1215 3.4 0.54 1215 4.0 224.037 0.46 1330 3.1 0.55 1330 3.8 252.436 0.37 1215 2.8 0.45 1215 3.3 283.193 0.36 1330 2.5 0.43 1330 3.0 319.091 0.29 1215 2.2 0.35 1215 2.6 GKS07 - 3N òòò òE 11.378 4.16 613 62 4.99 613 74 1E 1E 2E 3E 4E 5E 17.270 4.40 984 41 5.28 984 49 100 112 90 80 90 182/184TC 25.244 3.60 1177 28 4.32 1177 33 160 160 160 160 200 Nema 28.274 3.28 1202 25 3.94 1202 30 31.858 2.84 1172 22 3.41 1172 26 36.063 2.76 1290 19 3.31 1290 23 44.178 2.27 1300 16 2.72 1300 19 50.345 1.99 1300 14 2.39 1300 17 57.501 1.76 1310 12 2.11 1310 15 64.790 1.42 1195 11 1.71 1195 13 70.474 1.45 1320 9.9 1.73 1320 12 79.407 1.17 1205 8.8 1.41 1205 11 92.563 1.11 1330 7.6 1.33 1330 9.1 104.296 0.90 1215 6.7 1.08 1215 8.1 112.338 0.91 1330 6.2 1.10 1330 7.5 126.578 0.74 1215 5.5 0.89 1215 6.6 140.548 0.73 1330 5.0 0.88 1330 6.0 158.364 0.59 1215 4.4 0.71 1215 5.3 CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net 6-63 6
Page 1 and 2:
G-motion const Geared motors G-moti
Page 3 and 4:
Product key Geared motors Type desi
Page 5 and 6:
We can offer you automation solutio
Page 7 and 8:
9300 servo inverter 9300 vector fre
Page 9 and 10:
G-motion servo MC/MD Dynamic geared
Page 11 and 12:
Contents G-motion const Product key
Page 13 and 14:
G-motion const en 7/2006 General G-
Page 15 and 16:
Helical geared motors GST 0.06 to 4
Page 17 and 18:
[°] Angle of action of radial forc
Page 19 and 20:
We aim to process your order quickl
Page 21 and 22:
G-motion const en 7/2006 Quantity i
Page 23 and 24:
Customer no. G S T Other ordering d
Page 25 and 26:
Customer no. G K R - 2 Other orderi
Page 27 and 28:
Customer no. G S S Other ordering d
Page 29 and 30:
G-motion const en 7/2006 CTi Automa
Page 31 and 32:
Drive dimensioning G-motion const D
Page 33 and 34:
Torque derating for 4-pole motors T
Page 35 and 36:
Operating mode S1 G-motion const en
Page 37 and 38:
Gearbox efficiency Site altitude kh
Page 39 and 40:
Drive dimensioning Dimensioning Dut
Page 41 and 42:
G-motion const en 7/2006 q [J] Driv
Page 43 and 44:
Additional radial force factors of
Page 45 and 46:
GSS 05-2 G-motion const en 7/2006 D
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Moments of inertia for helical gear
Page 53 and 54:
Moments of inertia for shaft-mounte
Page 55 and 56:
Moments of inertia for bevel gearbo
Page 57 and 58:
Moments of inertia for helical-beve
Page 59 and 60:
Moments of inertia for drive design
Page 61 and 62:
Basic designs Gearbox type Gearbox
Page 63 and 64:
Gearbox with mounting flange design
Page 65 and 66:
Gearbox with mounting flange design
Page 67 and 68:
Gearbox with ventilation Gearbox si
Page 69 and 70:
General data Drive dimensioning Mot
Page 71 and 72:
Options (note possible combinations
Page 73 and 74:
Configuration aid Drive dimensionin
Page 75 and 76:
G-motion const en 7/2006 Helical ge
Page 77 and 78:
GST òò-1 Technical data - Helical
Page 79 and 80:
GST òò-1 Verdrehspiel Output back
Page 81 and 82:
Technical data - Helical gearboxes
Page 83 and 84:
On the designs listed in the table,
Page 85 and 86:
GSTòò - 1M G-motion const en 7/20
Page 87 and 88:
GSTòò - 1N G-motion const en 7/20
Page 89 and 90:
GSTòò - 1W G-motion const en 7/20
Page 91 and 92:
Page 93 and 94:
P1 = 0.12 kW P1 = 0.15 kW 12 89 1.9
Page 95 and 96:
P1 = 0.25 kW P1 = 0.31 kW 140 17 4.
Page 97 and 98:
P1 = 0.37 kW P1 = 0.45 kW 141 24 2.
Page 99 and 100:
P1 = 0.55 kW P1 = 0.68 kW 192 27 2.
Page 101 and 102:
P1 = 0.75 kW P1 = 0.92 kW 220 32 1.
Page 103 and 104:
P1 = 1.1 kW P1 = 1.3 kW 268 38 1.3
Page 105 and 106:
P1 = 1.5 kW P1 = 1.8 kW 399 35 3.0
Page 107 and 108:
P1 = 2.2 kW P1 = 2.6 kW 643 32 1.6
Page 109 and 110:
P1 = 2.2 kW P1 = 2.6 kW 5.4 3749 1.
Page 111 and 112:
P1 = 3.0 kW P1 = 3.6 kW 11 2494 2.4
Page 113 and 114:
P1 = 4.0 kW P1 = 4.8 kW 24 1518 1.0
Page 115 and 116:
P1 = 5.5 kW P1 = 6.6 kW 37 1381 1.6
Page 117 and 118:
P1 = 9.0/9.2 kW P1 = 11.0 kW 930 93
Page 119 and 120:
P1 = 11.0 kW P1 = 13.2 kW 28 3654 1
Page 121 and 122:
P1 = 22.0 kW P1 = 26.4 kW 188 1085
Page 123 and 124:
Page 125 and 126:
For dimensions, see page 3-162 onwa
Page 127 and 128:
Page 129 and 130:
M2 perm ^ 73 Nm GST04-2N òòò 50
Page 131 and 132:
M2 perm ^ 73 Nm GST04-2N òòò 50
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
M2 perm ^ 172 Nm GST05-3W òòò 50
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Gearbox Gearbox size o* o 1 p* h* a
Page 221 and 222:
Helical gearbox dimensions Geared m
Page 223 and 224:
Gearbox Solid shaft Output flange s
Page 225 and 226:
Geared motor GSTòò-2M VBR Motor G
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Geared motor GSTòò-3M VBR Motor G
Page 233 and 234:
Geared motor GSTòò-3M VCR Motor G
Page 235 and 236:
Geared motor GSTòò-3M VCK Motor G
Page 237 and 238:
Gearbox GSTòò-1N VBR Housing k 1
Page 239 and 240:
Gearbox GSTòò-1N VCR Housing k 1
Page 241 and 242:
Gearbox GSTòò-1N VCK Housing k 1
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Gearbox GSTòò-2N VCK G-motion con
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Gearbox GSTòò-3N VCK G-motion con
Page 255 and 256:
Gearbox GSTòò-2N òòò Housing k
Page 257 and 258:
Gearbox Drive size 1A 1B 1C 1D 1E 1
Page 259 and 260:
Gearbox Drive size GSTòò-3W òò
Page 261 and 262:
Output design VAL Helical gearbox d
Page 263 and 264:
Shaft-mounted helical gearbox (low-
Page 265 and 266:
VCK Technical data - Shaft-mounted
Page 267 and 268:
GFL òò-2 Output backlash 14' Verd
Page 269 and 270:
GFL Technical data - Shaft-mounted
Page 271 and 272:
Technical data - Shaft-mounted heli
Page 273 and 274:
Technical data - Shaft-mounted heli
Page 275 and 276:
50 Hz 60 Hz Shaft-mounted 50 Hz 60
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Shaft-mounted helical gearbox selec
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
G-motion const en 7/2006 Shaft-moun
Page 381 and 382:
Page 383 and 384:
Shaft-mounted helical gearbox dimen
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Gearbox GFLòò-3N òòò Housing k
Page 413 and 414:
Gearbox Drive size GFLòò-3W òò
Page 415 and 416:
Hollow shaft with shrink disc G-mot
Page 417 and 418:
Pitch circle in position 4 G-motion
Page 419 and 420:
Page 421 and 422:
Bevel gearbox G-motion const Techni
Page 423 and 424:
Hòò Technical data - Bevel gearbo
Page 425 and 426:
GKRòò-2M HòR Technical data - Be
Page 427 and 428:
Page 429 and 430:
50 Hz 60 Hz Geared motors 50 Hz 60
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
For dimensions, see page 5-40 onwar
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Geared motor Motor frame size 063 0
Page 455 and 456:
G-motion const en 7/2006 Bevel gear
Page 457 and 458:
Geared motor GKRòò-2M VòR Motor
Page 459 and 460:
Gearbox Solid shaft Output flange s
Page 461 and 462:
Gearbox GKRòò-2N HòR Housing k 1
Page 463 and 464:
Gearbox GKRòò-2N HAK Housing k 1
Page 465 and 466:
Gearbox GKRòò-2N VòR Housing k 1
Page 467 and 468:
Gearbox GKRòò-2N VAK Housing k 1
Page 469 and 470:
Hollow shaft with shrink disc G-mot
Page 471 and 472:
Hoseproof hollow shaft cover Gearbo
Page 473 and 474:
GKR 05/06 Torque plate at threaded
Page 475 and 476:
G-motion const en 7/2006 Bevel gear
Page 477 and 478:
Helical-bevel gearbox G-motion cons
Page 479 and 480:
Helical-bevel gearbox GKSòò VAK V
Page 481 and 482:
Helical-bevel gearbox GKSòò-3 Out
Page 483 and 484:
GKS 05 -3 06 -3 07 -3 -4 09 -4 Tech
Page 485 and 486:
GKSòò-3M HòR Motor frame size Ge
Page 487 and 488: Gearbox additional weights G-motion
Page 489 and 490: 50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 515 and 516: G-motion const en 7/2006 CTi Automa
Page 517 and 518: For dimensions, see page 6-144 onwa
Page 537: For dimensions, see page 6-144 onwa
Page 563 and 564: G-motion const en 7/2006 CTi Automa
Page 565 and 566: M2 perm ^ 190 Nm GKS04-3W òòò Fo
Page 581 and 582: M2 perm ^ 1330 Nm GKS07-3W òòò F
Page 589 and 590:
M2 perm ^ 3080 Nm GKS09-3W òòò F
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
M2 perm ^ 11784 Nm GKS14-3W òòò
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Gearbox Hollow shaft Threaded pitch
Page 607 and 608:
G-motion const en 7/2006 Helical-be
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Geared motor GKSòò-4M HòR Motor
Page 615 and 616:
Geared motor GKSòò-4M HAK Motor G
Page 617 and 618:
Geared motor GKSòò-4M VòR Motor
Page 619 and 620:
Geared motor GKSòò-4M VAK Motor G
Page 621 and 622:
Gearbox GKSòò-3N HòR Housing k 1
Page 623 and 624:
Gearbox GKSòò-3N HAK Housing k 1
Page 625 and 626:
Gearbox GKSòò-3N VòR Housing k 1
Page 627 and 628:
Gearbox GKSòò-3N VAK Housing k 1
Page 629 and 630:
Gearbox GKSòò-4N HòR Housing k 1
Page 631 and 632:
Gearbox GKSòò-4N HAK Housing k 1
Page 633 and 634:
Gearbox GKSòò-4N VòR Housing k 1
Page 635 and 636:
Gearbox GKSòò-4N VAK Housing k 1
Page 637 and 638:
Gearbox GKSòò-4N òòò Housing k
Page 639 and 640:
Gearbox Drive size 1A 1B 1C 1D 1E 1
Page 641 and 642:
Gearbox with 2nd output shaft end H
Page 643 and 644:
Torque plate at threaded pitch circ
Page 645 and 646:
Page 647 and 648:
Helical-worm gearbox G-motion const
Page 649 and 650:
VAK Hòò G-motion const en 7/2006
Page 651 and 652:
G-motion const en 7/2006 Technical
Page 653 and 654:
GSS 05 -2 06 -2 07 -2 G-motion cons
Page 655 and 656:
GSSòò-2N HòR Technical data - He
Page 657 and 658:
Page 659 and 660:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 661 and 662:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 663 and 664:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 665 and 666:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 667 and 668:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 669 and 670:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 671 and 672:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 673 and 674:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 675 and 676:
50 Hz 60 Hz 50 Hz 60 Hz n2 M2 c n2
Page 677 and 678:
n1 = 2800 rpm n1 = 3360 rpm GSS04 -
Page 679 and 680:
n1 = 700 rpm n1 = 840 rpm GSS04 - 2
Page 681 and 682:
M2 perm ^ 360 Nm GSS05-2N òòò 50
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
G-motion const en 7/2006 Helical-wo
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Geared motor GSSòò-2M HòR Motor
Page 729 and 730:
Geared motor GSSòò-2M HAK Motor g
Page 731 and 732:
Geared motor GSSòò-2M VòR Motor
Page 733 and 734:
Geared motor GSSòò-2M VAK Motor g
Page 735 and 736:
Geared motor GSSòò-3M HòR G-moti
Page 737 and 738:
Geared motor GSSòò-3M HAK G-motio
Page 739 and 740:
Geared motor GSSòò-3M VòR G-moti
Page 741 and 742:
Geared motor GSSòò-3M VAK G-motio
Page 743 and 744:
Gearbox GSSòò-2N HòR Housing k 1
Page 745 and 746:
Gearbox GSSòò-2N HAK Housing k 1
Page 747 and 748:
Gearbox GSSòò-2N VòR Housing k 1
Page 749 and 750:
Gearbox GSSòò-2N VAK Housing k 1
Page 751 and 752:
Gearbox GSSòò-3N HòR Housing k 1
Page 753 and 754:
Gearbox GSSòò-3N HAK Housing k 1
Page 755 and 756:
Gearbox GSSòò-3N VòR Housing k 1
Page 757 and 758:
Gearbox GSSòò-3N VAK Housing k 1
Page 759 and 760:
Gearbox GSSòò-3N òòò Housing k
Page 761 and 762:
Page 763 and 764:
Gearbox with 2nd output shaft end H
Page 765 and 766:
Torque plate at threaded pitch circ
Page 767 and 768:
Gearbox size 04 115 100 G-motion co
Page 769 and 770:
Motors G-motion const Technical dat
Page 771 and 772:
Page 773 and 774:
No. of pairs of poles 1 (2-pole) Mo
Page 775 and 776:
No. of pairs of poles 1 (2-pole) Te
Page 777 and 778:
Motor frame size Connection 063C02
Page 779 and 780:
Motor terminal box Technical data -
Page 781 and 782:
Motor terminal box KK1 Dimensions a
Page 783 and 784:
Motor terminal box with connector I
Page 785 and 786:
Motor terminal box with connector I
Page 787 and 788:
Motor terminal box with HAN 10E con
Page 789 and 790:
Motor terminal box with HAN 10E con
Page 791 and 792:
starttec motor starter Functions an
Page 793 and 794:
starttec motor starter Dimensions a
Page 795 and 796:
Geared motors and geared brake moto
Page 797 and 798:
Brake motors are fitted with spring
Page 799 and 800:
Rated data G-motion const en 7/2006
Page 801 and 802:
Voltages G-motion const en 7/2006 T
Page 803 and 804:
G-motion const en 7/2006 Technical
Page 805 and 806:
Built-on accessories Integral fan I
Page 807 and 808:
Built-on accessories Integral fan w
Page 809 and 810:
Built-on accessories Integral fan w
Page 811 and 812:
Built-on accessories Blower with pr
Page 813:
G-motion const en 7/2006 Dimensions
show all

Lenze G-Motion Gear Motors - CTi Automation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?