Lenze G-Motion Gear Motors - CTi Automation

8
Motor terminal box with connector ICN
General data
Technical data - Motors
Motor connection
Design Rotatable connector in accordance with industry standard, with screwed connection.
The motor circuit is specified in the terminal box and must be checked prior to
commissioning. (The counter plug is not included in the scope of supply.)
Enclosure IP65
No. of contacts Power: 3 + PE Signal: 4
Permissible rated current 20 A 2.5 A
Permissible rated voltage 630 V AC/DC 250 V AC/DC
Design Designation
1 Connector ICN
2 Motor terminal box
Connector assignments
4 not labelled
Male plugs are not included in the scope of supply.
Caution! Before commissioning the motor,
the motor circuit (Y or ∆)
must be checked.
Pin no. Connection Connection designation Motor frame size
1 Phase U
2 PE conductor PE
3 Phase W
4
A
Phase
Thermal detector
V
TCO/PTC/KTY+
063....112
B Thermal detector TCO/PTC/KTY-
C Brake Br
D Brake Br
8-16 G-motion const en 7/2006
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net