Produkt- information Set-Compact-Video SET CV 850-1 bis ... - Siedle
Produkt- information Set-Compact-Video SET CV 850-1 bis ... - Siedle
Produkt- information Set-Compact-Video SET CV 850-1 bis ... - Siedle
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Programming - manual<br />
Programming internal calls<br />
Application<br />
You wish a bus telephone to be<br />
able to call and communicate with<br />
another bus telephone in the system.<br />
The muting and light buttons<br />
of the bus telephones can be<br />
reprogrammed if required for<br />
internal call functions.<br />
1 Switch on the programming mode.<br />
At the VSNG <strong>850</strong>-..., press the programming<br />
mode button briefly. The<br />
LED1 flashes in a 2-second rhythm<br />
to indicate that the programming<br />
mode is active.<br />
4 Lift the receiver at the second<br />
bus telephone you wish to enable<br />
for internal calls. The programming<br />
mode tone is audible.Hold the light<br />
button down for 4 seconds. The<br />
acknowledgement tone is audible.<br />
Do not replace the receiver.<br />
22<br />
2 Lift the receiver at the first bus<br />
telephone you wish to enable for<br />
internal calls. The programming<br />
mode tone is audible.<br />
5 Hold the light button down for<br />
4 seconds. The acknowledgement<br />
tone is audible. Do not replace the<br />
receiver.<br />
3 Hold the light button down for<br />
4 seconds. The acknowledgement<br />
tone is audible. Do not replace the<br />
receiver.<br />
6 A speech connection now exists<br />
between the two bus telephones.