Download - Sorst

More documents

Recommendations

Info

8 Technology EXPANDED METAL MESH HAS FOUR SIDES Expanded metal mesh displays, as a result of the production process, a contortion which lends it structural characteristics. A side in the direction of elongation (A = Profile side) B side in the direction of elongation (B = flat side) A side in the opposite direction of elongation B side in the opposite direction of elongation
E-5th Mesh Direction of elongation parallel to long side Hole diameter: 2,5mm Material Mesh Length in mm Mesh- Width in mm Strand Width in mm Strand Thickness in mm Thickness Experf Advantages of extended metal over perforated metal plate • High variability of free cross-sectional area Open Areas from 4 % to 90 % are possible. • Price Advantage Expanded is produced without material loss • flat-rolled or structured format possible Up to a thickness of 3.0 mm we are able to flat-roll virtually all expanded metal laths, enabling them to be deployed as perforated metal plate. • <strong>Sorst</strong> Streckmetall especially developed Experf- und Square-Mesh to substitute perforated metal plate and reduce your costs. in mm Sheet Size in mm Ref. No. Open Steel sendzimir 5 3,8 1 0,7 1 1000x2000 E5-4-KF-DX-07 47,4 2,9 Steel sendzimir 5 3,8 1,1 1 1 1000x2000 E5-4-KF-DX-10 42 4,1 E-8th Mesh Direction of elongation parallel to long side Hole diameter: 3mm Material Mesh Length in mm Application Sendzimir Application Sendzimir Mesh- Width in mm Strand Width in mm Strand Thickness in mm Thickness in mm Sheet Size in mm Steel sendzimir 8 6,5 1,4 1 1 1000x2000 1250x2500 Area in % Ref. No. Open E8-7-KF-DX-10 E8-7-MF-DX-10 Area in % Weight Kg / m 2 Weight Kg / m 2 57 3,5 9
Page 1 and 2: Square Mesh Expanded Metal Experf P
Page 3 and 4: The company Sorst Streckmetall has
Page 5 and 6: EXPANDED METAL MESH Expanded metal
Page 7: COMPARISON flat-rolled standard CAL
Page 11 and 12: Q-8th Mesh Direction of elongation
Page 13 and 14: 6th Mesh Direction of elongation pa
Page 15 and 16: 16th Mesh Direction of elongation p
Page 23 and 24: 115th Mesh Direction of elongation
Page 25 and 26: NewYork Direction of elongation par
Page 33 and 34: Rv 3-5 Round hole staggered pitch R
Page 35 and 36: Qg 8-11 Square holes square pitch M
Page 37 and 38: Profile edging for expanded metal A
Page 39 and 40: Powder Coating • Surface coating

Download - Sorst

Create successful ePaper yourself

Delete template?

Save as template?