SMC2482W

More documents

Recommendations

Info

27 5.3 | Configure the Wireless Bridge using Web-based Utility (Advanced Setup) The Advanced Setup option provides more configuration options for the SMC2482W Wireless Bridge. 1. Log into the SMC2482W Web-based Utility. (See section 4.2 for more information) 2. Click on [Advanced Setup] link. 3. To change the IP configuration on the SMC2482W, click on the [LAN] link on the left hand navigation menu. From this section, you can configure the following: • Static IP or DHCP Configuration For static IP settings, you can configure: • IP Address • Subnet Mask • Gateway
4. When you have completed configuring these settings, click the [APPLY] button to save the settings and reboot the Wireless Bridge. 5. To configure wireless settings, click on the [Wireless] link on the left hand navigation menu, and then choose the [Configuration] option. From this section, you can configure: • AP Name • SSID • Transmission Rate • Basic Rate • Channel • Preamble • Beacon Interval • RTS Threshold • Fragmentation Threshold • DTIM Interval • Authentication Type • Antenna • SSID Broadcast Note: Definitions of these settings can be found in the Glossary section at the end of this User Guide. 6. When you have completed configuring these settings, click the [APPLY] button to save the settings and reboot the Bridge. 28
Page 1 and 2: SMC2482W
Page 4 and 5: 1 Compliances FCC Class B Federal C
Page 6 and 7: 3 Warranty Limited Warranty Stateme
Page 8 and 9: 5 WARRANTIES EXCLUSIVE: IF AN SMC P
Page 10 and 11: 7 Congratulations on your purchase
Page 12 and 13: 9 Section 1 | Getting Started Site
Page 14 and 15: 11 3. Hold down the [Reset] button
Page 16 and 17: 13 Section 2 |Understanding Wireles
Page 18 and 19: 15 2.4 | Understanding Wireless Sec
Page 20 and 21: 17 3.2 | Installing the Utility Sof
Page 22 and 23: 19 Section 4 | Accessing the SMC248
Page 24 and 25: 21 Note: The SMC2482W is DHCP-enabl
Page 26 and 27: 23 3. From this section, you can co
Page 28 and 29: 25 4. The first step in the Setup W
Page 32 and 33: 29 5.4 | SMC2482W Operating Modes T
Page 34 and 35: 31 6.1 | Configure WEP using Window
Page 36 and 37: 33 6.3 | Configure MAC Filtering us
Page 38 and 39: 35 7.1 | View Wireless Bridge infor
Page 40 and 41: 37 Section 8 | Changing the Passwor
Page 42 and 43: 39 5. When you have the correct ins
Page 44 and 45: 41 10.2 | Restore the SMC2482W conf
Page 46 and 47: Section 12 | Technical Specificatio
Page 48 and 49: 45 Section 14 | Glossary 802.11 - 8
Page 50 and 51: 47 is modulated with a narrowband c
Page 52 and 53: 49 Static IP Address - A permanent
Page 54: FOR TECHNICAL SUPPORT, CALL: From U

SMC2482W

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?