SMC2482W

More documents

Recommendations

Info

33 6.3 | Configure MAC Filtering using Web-based Utility (Access Point mode) 1. Log into the <strong>SMC2482W</strong> Web-based Utility. (See section 4.2 for more information) 2. Click on [Advanced Setup] link. 3. Click on [Filter] link on the left hand navigation menu. 4. Check the [Enable] option. 5. Enter in the MAC address of the clients/users that you want to have access to your wireless network. Note: On the MAC Filtering option, there is a Connection list option. This drop-down menu will list all of the clients connecting to the AP who received a DHCP IP address. If you want to add one of these users to the MAC table, simply select them in the drop-down menu and select the ID that you want to copy them and click the [Copy to] button.
Section 7 | EZ Connect Turbo Wireless Bridge Information Both the Windows Utility and Web-based Utility provide information about the EZ Connect Turbo Wireless Bridge. The information below outlines which information can be found in which utility: Windows Utility: • AP Name • SSID • IP Address • Channel • WEP (Enable/Disable) • Utility Version Web Utility: LAN Information • IP Settings • IP Configuration SYSTEM Information • Firmware version • SSID • AP Name • MAC Address • Channel • WEP (Enable/Disable) • Network Activity Log 34
Page 1 and 2: SMC2482W
Page 4 and 5: 1 Compliances FCC Class B Federal C
Page 6 and 7: 3 Warranty Limited Warranty Stateme
Page 8 and 9: 5 WARRANTIES EXCLUSIVE: IF AN SMC P
Page 10 and 11: 7 Congratulations on your purchase
Page 12 and 13: 9 Section 1 | Getting Started Site
Page 14 and 15: 11 3. Hold down the [Reset] button
Page 16 and 17: 13 Section 2 |Understanding Wireles
Page 18 and 19: 15 2.4 | Understanding Wireless Sec
Page 20 and 21: 17 3.2 | Installing the Utility Sof
Page 22 and 23: 19 Section 4 | Accessing the SMC248
Page 24 and 25: 21 Note: The SMC2482W is DHCP-enabl
Page 26 and 27: 23 3. From this section, you can co
Page 28 and 29: 25 4. The first step in the Setup W
Page 30 and 31: 27 5.3 | Configure the Wireless Bri
Page 32 and 33: 29 5.4 | SMC2482W Operating Modes T
Page 34 and 35: 31 6.1 | Configure WEP using Window
Page 38 and 39: 35 7.1 | View Wireless Bridge infor
Page 40 and 41: 37 Section 8 | Changing the Passwor
Page 42 and 43: 39 5. When you have the correct ins
Page 44 and 45: 41 10.2 | Restore the SMC2482W conf
Page 46 and 47: Section 12 | Technical Specificatio
Page 48 and 49: 45 Section 14 | Glossary 802.11 - 8
Page 50 and 51: 47 is modulated with a narrowband c
Page 52 and 53: 49 Static IP Address - A permanent
Page 54: FOR TECHNICAL SUPPORT, CALL: From U

SMC2482W

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?