SMCD3GN Wireless Cable Modem Gateway User Manual - Charter ...
SMCD3GN Wireless Cable Modem Gateway User Manual - Charter ...
SMCD3GN Wireless Cable Modem Gateway User Manual - Charter ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Restoring Factory Defaults<br />
Getting to Know Your <strong>Gateway</strong><br />
Using the Reset button on the back panel, you can power cycle the <strong>Gateway</strong> and return it to<br />
its original factory default settings. As a result, any changes you made to the <strong>Gateway</strong>’s<br />
default settings will be removed. To reset the <strong>Gateway</strong> and keep any overrides you made to<br />
the factory default settings, use the software reset method described under “Using the<br />
Reboot Menu to Reboot the <strong>Gateway</strong>” on page 59.<br />
1. Leave power plugged into the <strong>Gateway</strong>.<br />
2. Find the Reset button on the back panel, then press and hold it for at least 10 seconds.<br />
3. Release the Reset button.<br />
14<br />
<strong>SMCD3GN</strong> <strong>Wireless</strong> <strong>Cable</strong> <strong>Modem</strong> <strong>Gateway</strong> <strong>User</strong> <strong>Manual</strong>