SMCD3GN Wireless Cable Modem Gateway User Manual - Charter ...
SMCD3GN Wireless Cable Modem Gateway User Manual - Charter ...
SMCD3GN Wireless Cable Modem Gateway User Manual - Charter ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuring Your <strong>Gateway</strong><br />
Figure 17. Ether Switch Port Control Menu<br />
The following procedure describes how to change the settings in the Ether Switch Port<br />
Control menu.<br />
1. To change a port from auto-negotiation to a fixed speed and duplex setting:<br />
a. Uncheck the Auto check box for the port.<br />
b. Click the radio that corresponds to the fixed speed you want to use for that port.<br />
c. Under the Mode H/F column, leave the check mark for full-duplex mode or uncheck it<br />
for half-duplex mode.<br />
2. To disable a port, regardless of the auto-negotiation and duplex settings, uncheck Enable<br />
for the port.<br />
3. Click Apply.<br />
34<br />
<strong>SMCD3GN</strong> <strong>Wireless</strong> <strong>Cable</strong> <strong>Modem</strong> <strong>Gateway</strong> <strong>User</strong> <strong>Manual</strong>
Change language