6724L3 1-a.book - SMC
6724L3 1-a.book - SMC
6724L3 1-a.book - SMC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Optional Media Extender Modules<br />
Optional 10/100/1000BASE-T Module (<strong>SMC</strong>6824GT)<br />
10/100/1000BASE-T Gigabit Module<br />
<strong>SMC</strong>6824GT<br />
DESCRIPTION OF HARDWARE<br />
Figure 1-4. Single-Port 1000BASE-T Gigabit Module<br />
Using Category 5, 5e, or 6 twisted-pair cable you can connect to another<br />
device up to 100 m (328 ft) away. The 1000BASE-T module operates at<br />
10/100/1000 Mbps. At 1000 Mbps it operates at full duplex and supports<br />
auto-negotiation of speed and flow control. At 10/100 Mbps it supports<br />
auto-negotiation of speed, duplex mode (i.e., half or full duplex), and flow<br />
control. Note that you should first test the cable installation for IEEE<br />
802.3ab compliance. See “1000BASE-T Cable Requirements” on page B-6.<br />
Optional 100BASE-FX Module (<strong>SMC</strong>6824FSSC)<br />
100BASE-FX Singlemode Module<br />
TX RX<br />
<strong>SMC</strong>6824FSSC<br />
Figure 1-5. Single-Port 100BASE-FX Single-Mode Module<br />
Using single-mode fiber optic cable, the 100BASE-FX port can be<br />
connected to a remote site up to 20 km (12.4 miles) away. The<br />
100BASE-FX module operates at 100 Mbps, with support for full-duplex<br />
mode and flow control.<br />
1-7
Change language