User Guide - SMC

Advanced Web Configuration (Wireless Bridge mode)
36
or what it means, please review the Terminology section before
continuing. Any erroneous changes made here may cause
unwanted results.)
In the Device Name section, you can change the name of a
particular SMC2870W device. This is very useful if you have
more than one SMC2870W on your network.
In the IP Settings section, you can configure the unit with a static
IP or set it up to use Dynamic Host Configuration Protocol
(DHCP). Note: If you want to use DHCP, you must first make sure
that you have a DHCP Server on your network ready to distribute
additional IP Addresses.