User Guide - SMC

Advanced Web Configuration (Access Point mode)
40
After logging into the SMC2870W, all the System Information will
be displayed. You can proceed to another configuration page
using the navigational menu on the left.
Go to the Status | Associations page to view all the wireless
clients that are connected to your SMC2870W. The MAC
Addresses of the clients will be shown. This is helpful if you plan
to configure MAC Address Filtering in the future. You can simply
highlight the appropriate MAC Address, copy and paste it in the
section called Wireless | Access List.
Go to Wireless | Basic Settings to change parameters such as the
SSID, channel, and transmit rate. You can also change the
“Visibility Status”. Selecting [Visible] enables SSID broadcast
whereas selecting [Invisible] disables the SSID broadcast. The
“Wireless Mode” dictates what type of wireless client is allowed to