DISTRIBUTION PRODUCTS - Hubbell Power Systems

More documents

Recommendations

Info

DC 22 ALUMINUM VCP L VERSA-CRIMP® ALUMINUM COMPRESSION TAP Product Data & Conductor Size CONDUCTOR RANGE (AWG) CATALOG MAIN TAP NUMBER AAC ACSR COPPER AAC ACSR COPPER VCP44 2/0 (19, 7) 1/0 (19, 7) #1 (19, 7) #2 (19, 7) #3 (7), #4 (7) #6 (7) 1/0 (6/1) #1 (6/1) #2 (7/1, 6/1) #4 (7/1, 6/1) #6 (6/1) #2 (7/1) #4 (7/1) #6 (7/1) 1/0 (19,7) #1 (19,7) #2 (19,7) #3 (7) #4 (7) #6 (7) 1/0 (6/1) #1 (6/1) #2 (7/1 6/1) #4 (7/1,6/1) #6 (6/1) #2 (7, 1) #4 (7, 1) #6 (7, 1) ΔΔ For use with all VERSA-CRIMP Type VC6 four (4) nib tool only. • For use with VERSA-CRIMP ® Type VC6 (all) tools, except VC6350 and VC6500. • For aluminum to aluminum or aluminum to copper conductor taps. • For AAC or ACSR loop dead-ending on slack span construction when installed in tandem. Material: Body—Aluminum Alloy Factory inhibited and packaged in individual boxes. VERSA-CRIMP TOOL TYPE LENGTH INCHES (MM) APPROX. WT. EACH LBS. (KG) DECEMBER 2012 ANDERSON HUBBELL ® POWER SYSTEMS FARGO ® VC6 (ALL) ΔΔ 1-7/8 (47.6) .10 (.05)
• For use with VERSA-CRIMP ® or conventional tooling. • For aluminum to aluminum or aluminum to copper conductor tee combinations. • Uses the same installation tools and dies as VACS and VACL. • Color coded end plugs for easy die selection. Material: Aluminum Alloy-Tin Plated Factory inhibited VERSAtile ALUMINUM COMPRESSION TEE ALUMINUM OR COPPER CONDUCTOR MAIN TAP VERSA-CRIMP DIMENSIONS INCHES (MM) CATALOG CONVENTIONAL VERSA-CRIMP CONVENTIONAL VERSA-CRIMP TOOL NUMBER WIRE SIZE SYSTEM RANGE WIRE SIZE SYSTEM RANGE TYPE L H VACT1010 1/0 Str. Al/Cu #8-1/0 Str. Al/Cu 1/0 Str. Al/Cu #8-1/0 Str. Al/Cu VC6 (ALL) 4-1/2 (114.3) 2-5/8 (66.7) VACT4040 4/0 Str. Al/Cu #2-4/0 Str. Al/Cu 4/0 Str. Al/Cu #2-4/0 Str. Al/Cu VC6 (ALL) 5-1/4 (133.4) 3-1/16 (77.8) VACT300300 300 MCM Al/Cu 1/0-300 MCM Al/Cu 300 MCM Al/Cu 1/0-300 MCM Al/Cu VC6 (ALL) 5-1/2 (139.7) 3-5/16 (84.2) VACT500500 500 MCM Al/Cu 4/0-500 MCM Al/Cu 500 MCM Al/Cu 4/0-500 MCM Al-Cu VC6-3 VC6-FT 7-9/16 (192.1) 4-7/16 (112.7) VACT750750 750 MCM Al 500-750 MCM Al 500 MCM Cu 750 MCM Al 500-750 MCM Al 500 MCM Cu VC6-FT VC8 8-13/16 (223.9) 5-1/4 (133.4) Refer to page DC-29 & DC-30 for recommended tool and die information. AL9CU (90°C Rated) Product Data & Conductor Size L H ALUMINUM ANDERSON HUBBELL ® POWER SYSTEMS FARGO ® DECEMBER 2012 VACT APPROX. WT. EACH LBS. (KG) .106 (.05) .237 (.11) .350 (.16) .579 HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at 34.5 KV. The other U.L. listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 2000 volts, however Anderson recommends these connectors for application through 34.5 KV subject to the manufacturers’ limitations and recommendations for the insulation material. For further information, contact factory. LISTED 261L (.26) .747 (.34) DC 23 DB-23
Page 1 and 2: DISTRIBUTION PRODUCTS INDEX OvERHEa
Page 3 and 4: OVERHEAD PRIMARY TAPS HOT LINE TAP
Page 5 and 6: For Aluminum, ACSR, and armor rod c
Page 7 and 8: Fargo stirrups are designed for eas
Page 9 and 10: For copper conductor. For installat
Page 11 and 12: The arrester line connectors allow
Page 13 and 14: • Wide body contact area and two
Page 15 and 16: Bronze “Line Snapper” clamps ar
Page 17 and 18: For copper conductor. Eyestem is at
Page 19 and 20: • GA100S Series Hot Line Stirrup
Page 21 and 22: • For use with Versa-Crimp ® or
Page 23: OVERHEAD PRIMARY TAPS COMPRESSION V
Page 27 and 28: • For use with VERSA-CRIMP ® Typ
Page 29 and 30: • For use with either VERSA-CRIMP
Page 31 and 32: CONVENTIONAL COMPRESSION DIE TOOLIN
Page 33: VCCT ANDERSON VERSA-CRIMP® COMPRES

DISTRIBUTION PRODUCTS - Hubbell Power Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?