CATALOGUE 2012 - Klingspor

More documents

Recommendations

Info

The abrasive mop discs in the new CMT series include an innovative rapid action system. Attachment is by means of the CMT 555 mounting plate designed specifically for CMT products. The CMT series abrasive mop discs can be fitted to the mounting plate and removed again with a quick turn of the hand. No tightening tools or retightening required. This makes the new grinding tools highly user-friendly at all levels, and significantly reduces setting-up times. 126 Abrasive mop discs Applications guide Since being introduced onto the market, KLINGSPOR Abrasive Mop Discs have found practical and economical use in many areas of surface finishing work. The fan-shaped radial fitting of the abrasive cloth flaps offers a far better grinding performance compared with other abrasive products. KLINGSPOR Abrasive Mop Discs are made of alumina zirconia, aluminium oxide or ceramic aluminium oxide coated flaps fastened to glass-fibre reinforced or glass-fabric backing plates. The even arrangement of the flaps guarantees high flexibility, constant high grinding performance and low-vibration running. Wear safety goggles or glasses to protect the eyes Wear a dust mask Incorrectly mounted Use ear muffs Observe safety instructions Wear safety gloves to protect hands Correctly mounted Do not use for wet grinding KLINGSPOR Abrasive Mop Discs are available in two designs. The flat disc form is mainly used for face and surface grinding. The convex disc form is mainly used for working on edges and welded seams as well as for face and surface grinding. The abrasive mop discs of the CMT series can only be used with the CMT 555 mounting plate. Flat form Convex form Applications guide The chart contains complete details of all products, individual materials and areas of application available for abrasive mop discs. grinding Surface Type Grain Form Page SMT 615 Extra Alumina zirconia / Al. oxide convex 127 SMT 616 Extra Alumina zirconia / Al. oxide flat 127 SMT 618 Extra Alumina zirconia / Al. oxide flat 128 SMT 619 Extra Alumina zirconia / Al. oxide convex 128 SMT 624 Supra Alumina zirconia convex 129 SMT 626 Supra Alumina zirconia convex 130 SMT 627 Supra Aluminium oxide convex 130 SMT 628 Supra Alumina zirconia flat 131 SMT 625 Special Alumina zirconia flat 131 SMT 630 Special Alumina zirconia multibond convex 132 SMT 656 Special Alumina zirconia convex 132 SMT 696 Special Ceramic Al. oxide multibond convex 133 SMT 800 Special Aluminium oxide (non woven) convex 133 NCD 200 Special SiC (coarse cleaning) flat 135 CMT 726 Supra Alumina zirconia convex 134 CMT 728 Supra Alumina zirconia flat 134 CMT 800 Special Aluminium oxide (non woven) convex 134 = main application = possible application The safe use of KLINGSPOR abrasives All KLINGSPOR Abrasive Mop Discs have been approved for an operating speed of 80 m/s. Each product is labelled with the appropriate safety pictograms. Applications Materials Working of welded seams Grinding of edges Metal Steel Tool steel Stainless steel High-alloy stainless steel Aluminium / NF metals Brass / Bronze Plastic / Polyester Paint/Varnish Wood More manufactured items from page 136
Abrasive mop disc Abrasive mop disc SMT 615 Diameter x Bore in mm Abrasive mop disc for universal applications on metals, especially suited for edge grinding, good price-performance ratio Available grits: Applications: 16 24 30 36 40 j 50 60 j 80 j 100 Grit Max. operating speed 120 150 180 220 240 280 320 360 400 Max. RPM 500 600 800 1000 1200 1500 2000 127 Metal d Design Convex Bonding agent Resin Grain Al. zirconia/Al. oxide Backing plate Glass fibre Packing unit/pcs. Cat. number 115 x 22,23 40 80 m/s 13,300 rpm 10 280228 115 x 22,23 60 80 m/s 13,300 rpm 10 280229 115 x 22,23 80 80 m/s 13,300 rpm 10 280230 125 x 22,23 40 80 m/s 12,200 rpm 10 280231 125 x 22,23 60 80 m/s 12,200 rpm 10 280232 125 x 22,23 80 80 m/s 12,200 rpm 10 280233 Abrasive mop disc SMT 616 Diameter x Bore in mm Abrasive mop disc for universal applications on metals, especially suited for surface grinding, good price-performance ratio Available grits: Applications: 16 24 30 36 40 j 50 60 j 80 j 100 Grit Max. operating speed 120 150 180 220 240 280 320 360 400 Max. RPM 500 600 800 1000 1200 1500 2000 Metal d Design Flat Bonding agent Resin Grain Al. zirconia/Al. oxide Backing plate Glass fibre Packing unit/pcs. Cat. number 115 x 22,23 40 80 m/s 13,300 rpm 10 280234 115 x 22,23 60 80 m/s 13,300 rpm 10 280245 115 x 22,23 80 80 m/s 13,300 rpm 10 280246 125 x 22,23 40 80 m/s 12,200 rpm 10 280247 125 x 22,23 60 80 m/s 12,200 rpm 10 280248 125 x 22,23 80 80 m/s 12,200 rpm 10 280249 Please observe: Please see Applications Guide on page 126. How to order: Instructions on page 187. Abrasive mop disc
Page 1 and 2:
CATALOGUE 2012 Abrasive tools for e
Page 3 and 4:
Contents General Information Conten
Page 5 and 6:
Index L Long-belt machines . . . .
Page 7 and 8:
Product overview Abrasive mop discs
Page 9 and 10:
Product guide Description Abrasive
Page 11 and 12:
Product guide Description Abrasive
Page 13 and 14:
Rolls Coated abrasives Abrasive pap
Page 15 and 16:
Rolls Coated abrasives Finishing pa
Page 17 and 18:
Rolls Coated abrasives ATTENTION: C
Page 19 and 20:
Rolls Coated abrasives Abrasive clo
Page 21 and 22:
Rolls Coated abrasives ATTENTION: C
Page 23 and 24:
Rolls, non-woven web Coated abrasiv
Page 25 and 26:
Abrasive belts Applications guide
Page 27 and 28:
Short and long belts Applications g
Page 29 and 30:
Short and long belts Applications g
Page 31 and 32:
Abrasive belts Coated abrasives Abr
Page 33 and 34:
Abrasive belts Coated abrasives ATT
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Non-woven web belts Non-woven texti
Page 51 and 52:
Short belts for hand held machines
Page 53 and 54:
Wide belts Applications guide Manuf
Page 55 and 56:
Wide belts Coated abrasives Abrasiv
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Abrasive sleeves / Rubber drums Coa
Page 63 and 64:
Fibre discs Coated abrasives Abrasi
Page 65 and 66:
Fibre discs Coated abrasives Abrasi
Page 67 and 68:
Fibre discs Coated abrasives ATTENT
Page 69 and 70:
Backing pads Backing pad ST 358 A S
Page 71 and 72:
Strips/Sheets/Discs Applications gu
Page 73 and 74:
Strips/Sheets Applications guide Ma
Page 75 and 76: Strips/Sheets Coated abrasives Abra
Page 77 and 78: Strips/Sheets Coated abrasives Fini
Page 79 and 80: Strips/Sheets Coated abrasives Abra
Page 81 and 82: Strips, self-fastening Coated abras
Page 83 and 84: Strips, self-fastening / Hand block
Page 85 and 86: Abrasive sponge Abrasive sponge, fl
Page 87 and 88: Discs Applications guide Random orb
Page 89 and 90: Discs, self-fastening Coated abrasi
Page 95 and 96: Discs, self-fastening / Backing pad
Page 97 and 98: Backing pad Backing pad NDS 555 Dia
Page 99 and 100: Quick Change Discs Applications gui
Page 101 and 102: Quick Change Discs Quick Metal Conn
Page 103 and 104: Quick Change Discs Quick Metal Conn
Page 105 and 106: Quick Change Discs Quick Roll Conne
Page 107 and 108: Quick Change Discs Quick Roll Conne
Page 109 and 110: Abrasive Mops Applications guide Op
Page 111 and 112: Abrasive mop wheels Abrasive mop AT
Page 113 and 114: Abrasive mop wheels Abrasive mop Mo
Page 115 and 116: Abrasive mop wheels Abrasive mop Ab
Page 117 and 118: Small abrasive mop Abrasive mop Sma
Page 119 and 120: Small abrasive mop Abrasive mop ATT
Page 121 and 122: Small abrasive mop Abrasive mop Sma
Page 123 and 124: Small abrasive mop Abrasive mop ATT
Page 125: Abrasive fl ap drums Abrasive mop N
Page 129 and 130: Abrasive mop disc Abrasive mop disc
Page 135 and 136: Abrasive mop disc Mounting plate CM
Page 137 and 138: Notes 137 Abrasive mop disc
Page 139 and 140: Kronenflex grinding discs for hand
Page 145 and 146: Kronenfl ex cup grinding wheels for
Page 147 and 148: Kronenflex Cutting-Off Wheels Marki
Page 149 and 150: Kronenflex cutting-off wheels for h
Page 151 and 152: Kronenfl ex cutting-off wheels for
Page 153 and 154: Kronenflex cutting-off wheels for h
Page 155 and 156: Kronenfl ex cutting-off wheels for
Page 157 and 158: Kronenflex cutting-off wheels for p
Page 159 and 160: Kronenflex cutting-off wheels for p
Page 161 and 162: Kronenflex cutting-off wheels for s
Page 163 and 164: Diamond cutting blades Quality diam
Page 165 and 166: Diamond cutting blades Professional
Page 167 and 168: Diamond cutting blades High-perform
Page 169 and 170: Flexible abrasives Applications gui
Page 171 and 172: Flexible abrasives Hand block Hand
Page 173 and 174: Notes 173 Flexible abrasives
Page 175 and 176: Carbide Burrs Applications guide Im
Page 177 and 178:
Carbide Burrs Carbide burr HF 100 C
Page 179 and 180:
Carbide Burrs Carbide burr HF 100 G
Page 181 and 182:
Carbide Burrs Carbide burr HF 100 L
Page 183 and 184:
Carbide Burrs Carbide burr HF 100 S
Page 185 and 186:
Safety Recommendations • After mo
Page 187 and 188:
Using the catalogue How to order Th
show all

CATALOGUE 2012 - Klingspor

Create successful ePaper yourself

Delete template?

Save as template?