CATALOGUE 2012 - Klingspor
CATALOGUE 2012 - Klingspor
CATALOGUE 2012 - Klingspor
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
KLINGSPOR offers fibre discs for use on a<br />
diverse range of machines and with a variety<br />
of hole patterns. These discs are suitable for<br />
use on steel, stainless steel, NF metals and<br />
cast iron. The extensive grit range means you<br />
will find exactly the right product for every<br />
job. With these discs, even the most difficult<br />
surfaces can be worked and finished with ease.<br />
KLINGSPOR fibre discs are characterised by a<br />
high surface removal rate, long service life and<br />
optimum surface finishing. The programme is<br />
rounded off by matching backing pads.<br />
The safe use of KLINGSPOR abrasives<br />
The products of this group are labelled<br />
with the appropriate safety pictograms<br />
in compliance with FEPA Safety<br />
Recommendations for the Proper Use of<br />
Coated Abrasives.<br />
Wear safety<br />
goggles or<br />
glasses to protect<br />
the eyes<br />
Wear a dust<br />
mask<br />
Do not use for wet<br />
grinding<br />
KLINGSPOR abrasive fibre discs are<br />
out-standing for rough grinding and<br />
sanding, de-rusting metal parts, de-burring<br />
and grinding welded seams. These discs are<br />
also suitable for precision finishing work on<br />
metals.<br />
62<br />
Fibre discs<br />
Applications guide<br />
Quality and performance<br />
- Low clogging rate<br />
- Above-average long service life<br />
- Even grinding finish<br />
- Cool grinding<br />
Applications Fibre Discs<br />
Application Type Grain Backing Coating Characteristics Page<br />
Steel CS 561<br />
Stainless steel<br />
CS 564<br />
ACT<br />
Aluminium<br />
oxide<br />
Aluminium<br />
oxide<br />
Fibre Abrasive fibre disc for working on steel und NF metals 63<br />
Fibre <br />
CS 565 Alumina zirc. Fibre <br />
CS 570 Alumina zirc. Fibre <br />
CS 661<br />
Ceramic Al.<br />
oxide<br />
close semi-open open<br />
Minimum order quantities<br />
Disc diameter Min. order quantities<br />
to 230 mm<br />
Use ear muffs<br />
Wear safety<br />
gloves to protect<br />
hands<br />
1000 pieces<br />
Observe safety<br />
instructions<br />
Use a back-up<br />
pad<br />
Fibre <br />
Abrasive fibre disc for processing steel and non-ferrous metals. High<br />
aggressiveness and long service life due to new Advanced Coating<br />
Technology<br />
Abrasive fibre disc with high stock removal rate for rough grinding and<br />
deburring of steel and stainless steel<br />
High-performance fibre disc with additional multibond for high stock removal<br />
rate and long service life for cool grinding on stainless steel and high-alloy<br />
steel, especially for surface grinding<br />
High-performance fibre disc with very high stock removal rate and extremely<br />
long service life, with self-sharpening ceramic grain for the processing of<br />
high-alloy steel, multibond for cool grinding<br />
Hole pattern for fibre discs<br />
10 = round hole<br />
30 = star shaped hole<br />
65<br />
65<br />
66<br />
68
Change language