polaris 40 - EFFEBI

Recommendations

Info

TECHNICAL FEATURES: Temperature limits: for fluids from -15°C to +100°C for gas from -15°C to + 60°C Pressure limits: for fluids from 40 bar to 32 bar for gas MOP 5 Application fields: VENUS Angle series is particularly recommended in gas installations. Threaded end connections: • Standard female and male according to UNI ISO 7/1 Operation devices: aluminium T-handle. Available colours: yellow. LIST OF COMPONENTS: description/materials/treatments body and threaded end gland stem chromium pl. polished ball seals O-ring stem packing operation device fixing nut surface treatment per type and size nominal diameter gas size in inch Ø D bore mm A mm B mm Ø C mm E mm F mm weight gr yellow violet orange red blue blue yellow green — hot stamped from bar machined from bar machined from bar machined from bar virgin PTFE NBR die-cast alum. alloy polyur c. zinc plated steel brilliant nickel-plating GENERAL TABLE: valve dimensions 15 1/2" 15 47 32 32 38 33 212 20 3/4" 20 56 38 40 46 38 365 BRASS BALL VALVES FOR GAS VENUS Angle CW617N CW614N CW617N CW617N 25 1" 25 56 46 48 50 46 566 UNI EN 12165 UNI EN 12164 UNI EN 12164 UNI EN 12164 DIN 3535 UNI 5076 UNI EN ISO 9001: 2000 Progettazione, Sviluppo, Fabbricazione Certificato n° 0024/3 SPECIFIC FEATURES: The VENUS angle valve, with full bore, is heavy and well dimensioned. The VENUS stem packing guarantees a high reliability above all in applications with low and very low pressures, which are typical in domestic installations. The T-handle is in polyurethan coated aluminium and ensures solidity and durability. • blow-out proof stem • does not need any maintenance, is equipped with wrapping seats ensuring long life cycles • an antiftriction ring forms the first automatic sealing at high pressure • two self-adjusting cone-shaped seals, with PTFE-PTFE sliding, therefore without wear, form the second sealing at low pressure • 1 O-Ring in NBR for sealing at very low pressure and vacuum • All valves are tested according to a strict procedure covering severe inspections on the entire production. PRESSURE/TEMPERATURE DIAGRAM at each pressure level corresponds a specific admissible temperature level and viceversa 22
Art. 1076..XG f/nut + tail Art. 1079..XG m/nut + tail BRASS BALL VALVES FOR GAS VENUS Angle with nut LIST OF COMPONENTS: description/materials/treatments body and threaded end gland stem chromium pl. polished ball nut tail seals operation device fixing nut surface treatment yellow violet orange red violet yellow blue yellow green — hot stamped from bar machined from bar machined from bar machined from bar hot stamped from bar hot stamped from bar virgin PTFE die-cast alum. alloy polyur c. zinc plated steel brilliant nickel-plating GENERAL TABLE: valve dimensions per type and size nominal diameter gas size in inch Ø D bore mm A mm B mm Ø C mm Ø G Ø H E mm female L mm male L mm 15 1/2"x1/2" 10 47 30 25 1/2" 1/2" 42 31 28 15 1/2"x3/4" 10 47 30 33 1/2" 3/4" 46 31 28 EN 331 TECHNICAL FEATURES: Temperature limits: for fluids from -15°C to +100°C for gas from -15°C to + 60°C Pressure limits: for fluids from 40 bar to 32 bar for gas MOP 5 Operation devices: Aluminium T-handle. Available colours: yellow. SPECIFIC FEATURES: CW617N CW614N CW617N CW617N CW617N CW617N B F A Ø G E UNI EN 12165 UNI EN 12164 UNI EN 12164 UNI EN 12164 UNI EN 12165 UNI EN 12165 UNI 5076 D Ø H Ø C Ø UNI EN ISO 9001: 2000 Progettazione, Sviluppo, Fabbricazione Certificato n° 0024/3 The connections have sizes moved by one position. Nevertheless size 1/2" x 1/2" is also available. The valve body derives from VENUS Angle: • blow-out proof stem • does not need any maintenance, is equipped with wrapping seats ensuring long life cycles • an antifriction ring forms the first automatic sealing at high pressure • two self-adjusting cone-shaped seals with PTFE-PTFE sliding, therefore without wear, form the second sealing at low pressure • all valves are tested according to a strict procedure covering severe inspections on the entire production. 23
Page 2 and 3: INDEX The Company pag. 1 Company Ce
Page 4: COMPANY CERTIFICATIONS In 1991 Effe
Page 7 and 8: PN 100 Art. 0121 F/F with T-handle
Page 9 and 10: PN 80 BRASS BALL VALVES KOSMOS Art.
Page 11 and 12: BRASS BALL VALVES MERCURY Art. 0401
Page 13 and 14: BRASS BALL VALVES GALAXY Art. 0501
Page 15 and 16: Art. 0827 F/H connector with T-hand
Page 17 and 18: BRASS BALL VALVES COMET Art. 0901 F
Page 19 and 20: BRASS BALL VALVES FOR GAS VENUS Art
Page 21 and 22: Art. 1021..XG f/nut + tail Art. 102
Page 23: Art. 1071 f/f with T-handle from 1/
Page 27 and 28: EN 331 EN 1775 Art. 1111 f/f with s
Page 29 and 30: TECHNICAL FEATURES Temperature limi
Page 31 and 32: GENERAL TABLE: valve dimensions per
Page 33 and 34: Art 4095 Flare/Flare SAE 45° with
Page 35 and 36: size 1 size 2 Ø D bore mm A mm B m
Page 37 and 38: Art. 1100 3-way L-ported with lever
Page 39 and 40: Art. 1206 3-piece bolted and flange
Page 41 and 42: Art. 1511 F/F with driving screw fr
Page 43 and 44: Art. 1600 for wall embedding f/f wi
Page 45 and 46: Art. 1670 Wall embedding ball valve
Page 47 and 48: PATENTED VALVE Art. 2071 (dx) LIST
Page 49 and 50: Art. 2027 F/Nut+tail with T-handle.
Page 51 and 52: Art. 2047 F/Nut+tail with T-handle.
Page 53 and 54: Art. 2170 F/F with lever in alumini
Page 55 and 56: Art. 2151 f/plug with aluminium lev
Page 57 and 58: PN210 Art. 2321 for high pressure F
Page 59 and 60: Art. 2351 F/F with lever in alumini
Page 61 and 62: TECHNICAL FEATURES: Temperature lim
Page 63 and 64: Art. 2411 f/f “CR” alloy with s
Page 65 and 66: Art. 2435 F/F ISO 7/1 Rc “CR” a
Page 67 and 68: Art. E 101 metal tube joint nut-fem
Page 69 and 70: MAIN STANDARD FEATURES CONSTRUCTION
Page 71 and 72: MAIN STANDARD FEATURES CONSTRUCTION
Page 73 and 74: ACTUATOR FEATURES • Rotation angl
Page 75 and 76:
ACTUATOR FEATURES • Rotation angl
Page 77 and 78:
MAIN STANDARD FEATURES • CONSTRUC
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
AUTOMATED INDUSTRIAL VALVES SUN WP
Page 91 and 92:
Page 93 and 94:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
AUTOMATED INDUSTRIAL VALVES TITAN 3
Page 107 and 108:
Page 109 and 110:
AUTOMATED INDUSTRIAL VALVES ARGOS 3
Page 111 and 112:
Page 113 and 114:
AUTOMATED INDUSTRIAL VALVES MOON AI
Page 115 and 116:
Page 117 and 118:
AUTOMATED INDUSTRIAL VALVES MOON AI
Page 119 and 120:
Page 121 and 122:
AUTOMATED INDUSTRIAL VALVES MOON A1
Page 123 and 124:
Page 125 and 126:
ACTUATOR FEATURES AUTOMATED INDUSTR
Page 127 and 128:
INDUSTRIAL VALVES MOON ND AISI 316
Page 129 and 130:
AUTOMATED INDUSTRIAL VALVES UNI EN
Page 131 and 132:
19 12 14 10 3 1 BAR 18 12 8 6 INDUS
Page 133 and 134:
Page 137 and 138:
Page 141 and 142:
Page 143 and 144:
AUTOMATED INDUSTRIAL VALVES SELENE
Page 145 and 146:
SPECIAL EXECUTIONS • 15% GLASS-FI
Page 147 and 148:
AUTOMATED INDUSTRIAL VALVES SELENE
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 159 and 160:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
AUTOMATED INDUSTRIAL VALVES TOTAL 2
Page 173 and 174:
Page 177 and 178:
12 32 4 = = SIZE 045 052 063 075 08
Page 179 and 180:
GALAXY ASTER ISIS A mm Ø B mm KOSM
Page 181 and 182:
MINIBALL A mm B mm L mm KOSMOS A mm
Page 183:
Art. 7100 INCAS K Knob/rosette (ope
Page 191 and 192:
1 = EXCELLENT • 2 = GOOD 3 = NOT
Page 193 and 194:
1 = EXCELLENT • 2 = GOOD 3 = NOT
Page 195 and 196:
1 = EXCELLENT 2 = GOOD 3 = INSUFFIC
Page 197 and 198:
1 = EXCELLENT 2 = GOOD 3 = INSUFFIC
Page 199 and 200:
PRESSION (BAR) p 0,010 0,020 0,030
show all

polaris 40 - EFFEBI

Create successful ePaper yourself

Delete template?

Save as template?