polaris 40 - EFFEBI

Recommendations

Info

Art. 1216 with mobile flanges with lever in aluminium. Available range: from DN 15 to DN80 LIST OF COMPONENTS: description/materials/treatments body and threaded end gland gland nut stem chromium pl. polished ball seals o-ring operation device turnable flanges threaded joint fixing screw surface treatment yellow violet geen orange red blue blue black yellow red violet — GENERAL TABLE: valve dimensions per type and size nominal diameter size Ø D bore mm A mm B mm Ø C mm Ø E mm number of holes Ø F mm L mm weight gr 15 DN 15 15 100 64 95 14 4 65 105 1635 20 DN 20 20 160 92 105 14 4 75 118 2470 FLANGED BRASS BALL VALVES hot stamped from bar machined from bar machined from bar machined from bar machined from bar virgin PTFE NBR die-cast alumin. alloy polyur c. zinc plated steel hot stamped from bar zinc plated steel brilliant nickel-plating 25 DN 25 25 160 96 115 14 4 85 135 3280 32 DN 32 32 195 113 140 18 4 100 149 5200 ROLLY 40 DN 40 40 195 120 150 18 4 110 161 6700 50 DN 50 50 235 135 165 18 4 125 181 9200 TECHNICAL FEATURES: Temperature limits: for fluids from -20°C to +130°C Pressure limits: for fluids 16 bar for all the sizes available CW617N CW614N CW614N CW617N CW617N CW617N UNI EN 12165 UNI EN 12164 UNI EN 12164 UNI EN 12164 UNI EN 12164 DIN 3535 UNI 5076 UNI EN 12165 UNI EN ISO 9001: 2000 Progettazione, Sviluppo, Fabbricazione Certificato n° 0024/3 Application fields: ROLLY series can be employed as an alternative to OLYMPIC. It is usually employed for gas and water distribution, industrial and civil heating, water plants, hydraulics and pneumatics, oil and petrochemical fields, non aggressive media. Connections: • Standard Flanges to UNI 2278 (sealing raised face PN16) Operation devices: Aluminium lever. Available colours: black 65 DN 65 65 280 155 185 18 4 145 209 12550 SPECIFIC FEATURES: • the ROLLY valve, with full bore, employs the TOTAL ball valve as the basic component • the flanges in steel are revolving and allow the positioning of the valve with respect to pipe axis • does not need any maintenance, is equipped with wrapping seats ensuring long life cycles • four self-adjusting cone-shaped seals, with PTFE-PTFE sliding, therefore without wear, form two sealings with automatic functioning • an adjusting gland allows the sealing reset on the stem • all valves are tested according to a strict procedure covering severe inspections on the entire production. 80 DN 80 80 280 167 200 18 8 160 238 17000 LOSS OF HEAD DIAGRAM: the Kv value is the port capacity causing a pressure drop of 1 bar. 38
Art. 1511 F/F with driving screw from 1/8" to 1/2" Art. 1512 M/F with driving screw from 1/8" to 1/2" Art. 1513 M/M with driving screw from 1/8" to 1/2" Art. 1571 F/H with little lever from 1/8" to 1/2" Art. 1572 M/H with little lever from 1/8" to 1/2" BRASS BALL VALVES MINIBALL Art. 1521 C/F with little lever from 3/8" to 1/2" Art. 1522 C/M with little lever from 3/8" to 1/2" Art. 1523 C/C with little lever from 3/8" to 1/2" Art. 1531 C/F with driving screw from 3/8" to 1/2" Art. 1532 C/M with driving screw from 3/8" to 1/2" Art. 1533 C/C with driving screw from 3/8" to 1/2" UNI EN ISO 9001: 2000 Progettazione, Sviluppo, Fabbricazione Certificato n° 0024/3 Art. 1501 F/F with little lever. Available range: from 1/8" to 1/2" Art. 1502 M/F with little lever. Available range: from 1/8" to 1/2" Art. 1503 M/F with little lever. Available range: from 1/8" to 1/2" Art. 1591 F/F with little lever chromium plated from 1/8" to 1/2" Art. 1592 M/F with little lever chromium plated from 1/8" to 1/2" Art. 1593 M/M with little lever chromium plated from 1/8" to 1/2" 39
Page 2 and 3: INDEX The Company pag. 1 Company Ce
Page 4: COMPANY CERTIFICATIONS In 1991 Effe
Page 7 and 8: PN 100 Art. 0121 F/F with T-handle
Page 9 and 10: PN 80 BRASS BALL VALVES KOSMOS Art.
Page 11 and 12: BRASS BALL VALVES MERCURY Art. 0401
Page 13 and 14: BRASS BALL VALVES GALAXY Art. 0501
Page 15 and 16: Art. 0827 F/H connector with T-hand
Page 17 and 18: BRASS BALL VALVES COMET Art. 0901 F
Page 19 and 20: BRASS BALL VALVES FOR GAS VENUS Art
Page 21 and 22: Art. 1021..XG f/nut + tail Art. 102
Page 23 and 24: Art. 1071 f/f with T-handle from 1/
Page 25 and 26: Art. 1076..XG f/nut + tail Art. 107
Page 27 and 28: EN 331 EN 1775 Art. 1111 f/f with s
Page 29 and 30: TECHNICAL FEATURES Temperature limi
Page 31 and 32: GENERAL TABLE: valve dimensions per
Page 33 and 34: Art 4095 Flare/Flare SAE 45° with
Page 35 and 36: size 1 size 2 Ø D bore mm A mm B m
Page 37 and 38: Art. 1100 3-way L-ported with lever
Page 39: Art. 1206 3-piece bolted and flange
Page 43 and 44: Art. 1600 for wall embedding f/f wi
Page 45 and 46: Art. 1670 Wall embedding ball valve
Page 47 and 48: PATENTED VALVE Art. 2071 (dx) LIST
Page 49 and 50: Art. 2027 F/Nut+tail with T-handle.
Page 51 and 52: Art. 2047 F/Nut+tail with T-handle.
Page 53 and 54: Art. 2170 F/F with lever in alumini
Page 55 and 56: Art. 2151 f/plug with aluminium lev
Page 57 and 58: PN210 Art. 2321 for high pressure F
Page 59 and 60: Art. 2351 F/F with lever in alumini
Page 61 and 62: TECHNICAL FEATURES: Temperature lim
Page 63 and 64: Art. 2411 f/f “CR” alloy with s
Page 65 and 66: Art. 2435 F/F ISO 7/1 Rc “CR” a
Page 67 and 68: Art. E 101 metal tube joint nut-fem
Page 69 and 70: MAIN STANDARD FEATURES CONSTRUCTION
Page 71 and 72: MAIN STANDARD FEATURES CONSTRUCTION
Page 73 and 74: ACTUATOR FEATURES • Rotation angl
Page 77 and 78: MAIN STANDARD FEATURES • CONSTRUC
Page 87 and 88: AUTOMATED INDUSTRIAL VALVES SUN WP
Page 91 and 92:
MAIN STANDARD FEATURES • CONSTRUC
Page 93 and 94:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
AUTOMATED INDUSTRIAL VALVES TITAN 3
Page 107 and 108:
Page 109 and 110:
AUTOMATED INDUSTRIAL VALVES ARGOS 3
Page 111 and 112:
Page 113 and 114:
AUTOMATED INDUSTRIAL VALVES MOON AI
Page 115 and 116:
Page 117 and 118:
AUTOMATED INDUSTRIAL VALVES MOON AI
Page 119 and 120:
Page 121 and 122:
AUTOMATED INDUSTRIAL VALVES MOON A1
Page 123 and 124:
Page 125 and 126:
ACTUATOR FEATURES AUTOMATED INDUSTR
Page 127 and 128:
INDUSTRIAL VALVES MOON ND AISI 316
Page 129 and 130:
AUTOMATED INDUSTRIAL VALVES UNI EN
Page 131 and 132:
19 12 14 10 3 1 BAR 18 12 8 6 INDUS
Page 133 and 134:
Page 137 and 138:
Page 141 and 142:
Page 143 and 144:
AUTOMATED INDUSTRIAL VALVES SELENE
Page 145 and 146:
SPECIAL EXECUTIONS • 15% GLASS-FI
Page 147 and 148:
AUTOMATED INDUSTRIAL VALVES SELENE
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 159 and 160:
Page 165 and 166:
Page 167 and 168:
ACTUATOR FEATURES • Rotation angl
Page 169 and 170:
Page 171 and 172:
AUTOMATED INDUSTRIAL VALVES TOTAL 2
Page 173 and 174:
Page 177 and 178:
12 32 4 = = SIZE 045 052 063 075 08
Page 179 and 180:
GALAXY ASTER ISIS A mm Ø B mm KOSM
Page 181 and 182:
MINIBALL A mm B mm L mm KOSMOS A mm
Page 183:
Art. 7100 INCAS K Knob/rosette (ope
Page 191 and 192:
1 = EXCELLENT • 2 = GOOD 3 = NOT
Page 193 and 194:
1 = EXCELLENT • 2 = GOOD 3 = NOT
Page 195 and 196:
1 = EXCELLENT 2 = GOOD 3 = INSUFFIC
Page 197 and 198:
1 = EXCELLENT 2 = GOOD 3 = INSUFFIC
Page 199 and 200:
PRESSION (BAR) p 0,010 0,020 0,030
show all

polaris 40 - EFFEBI

Create successful ePaper yourself

Delete template?

Save as template?