polaris 40 - EFFEBI

Recommendations

Info

Art. 1150 3-way L-ported with lever in aluminium. Available range: from 1/4" to 2" LIST OF COMPONENTS: description/materials/treatments body and threaded end gland gland nut stem chromium pl. polished ball seals operation device fixing screw surface treatment yellow violet green orange red blue black green – A B THE DIRECTION OF THE FLOW IS UNDERSTANDABLE FROM THE STEM MARKING. POSITION A: from position B the handle is operated by a clockwise quarter turn. POSITION B: from position A the handle is operated by an anticlockwise quarter turn. POSITION A POSITION B hot stamped from bar CW617N machined from bar CW614N machined from bar CW614N machined from bar CW617N virgin PTFE CW617N die-cast alumin. alloy polyur c. stainless steel zinc plated steel brillant nickel-plating BRASS BALL VALVES DELTA UNI EN 12165 UNI EN 12164 UNI EN 12164 UNI EN 12164 UNI EN 12164 UNI 5076 TECHNICAL FEATURES: Temperature limits: for fluids from -10°C to +120°C Pressure limits: for fluids 10 bar max UNI EN ISO 9001: 2000 Progettazione, Sviluppo, Fabbricazione Certificato n° 0024/3 Application fields: DELTA series is available with L bore and allows only the diversion of the flow without shutting off the flow with the typical operation of a standard two-way valve. It is suggested for gas and water distribution, industrial and civil heating, water plants at medium pressure, hydraulics and pneumatics, oil and petrochemical fields, non aggressive media. Threaded end connections: • Standard Female to ISO 7/1 Rp Operation devices: Alluminium lever. Available colours: black. Specific features: • the DELTA valve with full bore is a product of easy and safe utilization guaranteeing a long working endurance • does not need any maintenance, is equipped with wrapping seats ensuring long life cycles • four self-adjusting cone-shaped seals, with PTFE-PTFE sliding, therefore without wear, form two sealings with automatic functioning • an adjusting gland allows the sealing reset on the stem • all valves are tested according to a strict procedure covering severe inspections on the entire production. LOSS OF HEAD DIAGRAM: the Kv value is the port capacity causing a pressure drop of 1 bar. GENERAL TABLE: valve dimensions per type and size nominal diameter gas size in inch Ø D bore mm A mm B mm Ø C mm E mm L mm weight gr 8 1/4" 10 100 61 29 26 52 295 10 3/8" 10 100 61 29 27 55 270 15 1/2" 14 100 64 36 33 69 410 20 3/4" 19 120 76 45 38 77 680 25 1" 24 120 80 54 46 89 1000 32 1"1/4 30,5 150 98 65 54 103 1740 40 1"1/2 38,5 150 104 79 61 114 2490 50 2" 48,5 175 119 96 73 134 4020 36
Art. 1206 3-piece bolted and flanged with lever in alluminium. Available range: from DN 20 to DN 100 LIST OF COMPONENTS: description/materials/treatments body and threaded end gland gland nut stem chromium pl. polished ball seals O-Ring for flange sealing operation device tie rods, nuts and spring washers fixing screw surface treatment yellow violet geen orange red blue blue black violet green — GENERAL TABLE: valve dimensions per type and size nominal diameter size Ø D bore mm A mm B mm Ø C mm Ø E mm number of holes Ø F mm L mm weight gr 20 DN 20 20 160 91 105 14 4 75 130 2390 25 DN 25 25 160 95 115 14 4 85 140 3050 FLANGED BRASS BALL VALVES OLYMPIC hot stamped from bar machined from bar machined from bar machined from bar machined from bar virgin PTFE VITON die-cast alumin. alloy polyur c. yellow zinc plated steel zinc plated steel brilliant nickel-plating 32 DN 32 32 195 112 140 18 4 100 165 4800 40 DN 40 40 195 118 150 18 4 110 165 6140 50 DN 50 50 235 132 165 18 4 125 203 8720 65 DN 65 65 280 155 185 18 4 145 222 12800 TECHNICAL FEATURES: Temperature limits: for fluids from -15°C to +120°C Pressure limits: for fluids 16 bar for all the sizes available CW617N CW614N CW614N CW617N CW617N UNI EN 12165 UNI EN 12164 UNI EN 12164 UNI EN 12164 UNI EN 12164 UNI 5076 UNI EN ISO 9001: 2000 Progettazione, Sviluppo, Fabbricazione Certificato n° 0024/3 Application fields: OLYMPIC series is suggested in the case of frequent interchangeability of components, e.g. for maintenance reasons. It is usually employed for gas and water distribution, industrial and civil heating, water plants, hydraulics and pneumatics, oil and petrochemical fields, non aggressive media. Connections: • Standard Flanges to UNI 2240 and 2229 (sealing raised face PN 16) overall length to ISO 5752 (table 6 medium series PN 16) Operation devices: Aluminium lever. Available colours: black, yellow. 80 DN 80 80 280 167 200 18 8 160 241 16520 SPECIFIC FEATURES: • the OLYMPIC valve with full bore, manufactured according to international standards, is of the type bolted with connection round flanges • does not need any maintenance, is equipped with wrapping seats ensuring long life cycles • four self-adjusting cone-shaped seals, with PTFE-PTFE sliding, therefore without wear, form two sealings with automatic functioning • an adjusting gland allows the sealing reset on the stem • all valves are tested according to a strict procedure covering severe inspections on the entire production. 100 DN 100 100 280 180 220 18 8 180 305 24500 LOSS OF HEAD DIAGRAM: the Kv value is the port capacity causing a pressure drop of 1 bar. 37
Page 2 and 3: INDEX The Company pag. 1 Company Ce
Page 4: COMPANY CERTIFICATIONS In 1991 Effe
Page 7 and 8: PN 100 Art. 0121 F/F with T-handle
Page 9 and 10: PN 80 BRASS BALL VALVES KOSMOS Art.
Page 11 and 12: BRASS BALL VALVES MERCURY Art. 0401
Page 13 and 14: BRASS BALL VALVES GALAXY Art. 0501
Page 15 and 16: Art. 0827 F/H connector with T-hand
Page 17 and 18: BRASS BALL VALVES COMET Art. 0901 F
Page 19 and 20: BRASS BALL VALVES FOR GAS VENUS Art
Page 21 and 22: Art. 1021..XG f/nut + tail Art. 102
Page 23 and 24: Art. 1071 f/f with T-handle from 1/
Page 25 and 26: Art. 1076..XG f/nut + tail Art. 107
Page 27 and 28: EN 331 EN 1775 Art. 1111 f/f with s
Page 29 and 30: TECHNICAL FEATURES Temperature limi
Page 31 and 32: GENERAL TABLE: valve dimensions per
Page 33 and 34: Art 4095 Flare/Flare SAE 45° with
Page 35 and 36: size 1 size 2 Ø D bore mm A mm B m
Page 37: Art. 1100 3-way L-ported with lever
Page 41 and 42: Art. 1511 F/F with driving screw fr
Page 43 and 44: Art. 1600 for wall embedding f/f wi
Page 45 and 46: Art. 1670 Wall embedding ball valve
Page 47 and 48: PATENTED VALVE Art. 2071 (dx) LIST
Page 49 and 50: Art. 2027 F/Nut+tail with T-handle.
Page 51 and 52: Art. 2047 F/Nut+tail with T-handle.
Page 53 and 54: Art. 2170 F/F with lever in alumini
Page 55 and 56: Art. 2151 f/plug with aluminium lev
Page 57 and 58: PN210 Art. 2321 for high pressure F
Page 59 and 60: Art. 2351 F/F with lever in alumini
Page 61 and 62: TECHNICAL FEATURES: Temperature lim
Page 63 and 64: Art. 2411 f/f “CR” alloy with s
Page 65 and 66: Art. 2435 F/F ISO 7/1 Rc “CR” a
Page 67 and 68: Art. E 101 metal tube joint nut-fem
Page 69 and 70: MAIN STANDARD FEATURES CONSTRUCTION
Page 71 and 72: MAIN STANDARD FEATURES CONSTRUCTION
Page 73 and 74: ACTUATOR FEATURES • Rotation angl
Page 77 and 78: MAIN STANDARD FEATURES • CONSTRUC
Page 87 and 88: AUTOMATED INDUSTRIAL VALVES SUN WP
Page 91 and 92:
MAIN STANDARD FEATURES • CONSTRUC
Page 93 and 94:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
AUTOMATED INDUSTRIAL VALVES TITAN 3
Page 107 and 108:
Page 109 and 110:
AUTOMATED INDUSTRIAL VALVES ARGOS 3
Page 111 and 112:
Page 113 and 114:
AUTOMATED INDUSTRIAL VALVES MOON AI
Page 115 and 116:
Page 117 and 118:
AUTOMATED INDUSTRIAL VALVES MOON AI
Page 119 and 120:
Page 121 and 122:
AUTOMATED INDUSTRIAL VALVES MOON A1
Page 123 and 124:
Page 125 and 126:
ACTUATOR FEATURES AUTOMATED INDUSTR
Page 127 and 128:
INDUSTRIAL VALVES MOON ND AISI 316
Page 129 and 130:
AUTOMATED INDUSTRIAL VALVES UNI EN
Page 131 and 132:
19 12 14 10 3 1 BAR 18 12 8 6 INDUS
Page 133 and 134:
Page 137 and 138:
Page 141 and 142:
Page 143 and 144:
AUTOMATED INDUSTRIAL VALVES SELENE
Page 145 and 146:
SPECIAL EXECUTIONS • 15% GLASS-FI
Page 147 and 148:
AUTOMATED INDUSTRIAL VALVES SELENE
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 159 and 160:
Page 165 and 166:
Page 167 and 168:
ACTUATOR FEATURES • Rotation angl
Page 169 and 170:
Page 171 and 172:
AUTOMATED INDUSTRIAL VALVES TOTAL 2
Page 173 and 174:
Page 177 and 178:
12 32 4 = = SIZE 045 052 063 075 08
Page 179 and 180:
GALAXY ASTER ISIS A mm Ø B mm KOSM
Page 181 and 182:
MINIBALL A mm B mm L mm KOSMOS A mm
Page 183:
Art. 7100 INCAS K Knob/rosette (ope
Page 191 and 192:
1 = EXCELLENT • 2 = GOOD 3 = NOT
Page 193 and 194:
1 = EXCELLENT • 2 = GOOD 3 = NOT
Page 195 and 196:
1 = EXCELLENT 2 = GOOD 3 = INSUFFIC
Page 197 and 198:
1 = EXCELLENT 2 = GOOD 3 = INSUFFIC
Page 199 and 200:
PRESSION (BAR) p 0,010 0,020 0,030
show all

polaris 40 - EFFEBI

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?