PDF | 4.9 MB - Wacker Chemie

CONSTRUCTION & PAINTS I POLyMER BINdERS I EMEA 

CREATING TOMORROW’S SOLUTIONS 

75 YEARS OF VINNAPAS ® DISPERSIONS 

FUTURE BOUND SINCE 1938 

CELEBRATE WITH US 

www.wacker.com/future-bound 

PROdUCT OvERvIEW 

vINNAPAS ® POLyMER dISPERSIONS 

1938 

2013

IMPROvING ThE QUALITy Of 

LIfE SINCE 1938 

Since the 1930s, WACKER has been developing polymer dispersions 

that are indispensable in the paints and construction industries. 

Today, we offer you an elaborate portfolio, dedicated to fulfilling both 

today’s and tomorrow’s demands. What do you want to improve? 

vINNAPAS ® is a registered trademark 

of Wacker Chemie AG. 

2 

Healthy Living 

e.g. with VINNAPAS ® VAE dispersions 

for low-VOC and plasticizer-free 

interior paints. 

Safety 

e.g. with VINNAPAS ® dispersions 

for fire-resistant and intumescent 

paints. 

Energy Saving 


for external thermal insulation 

composite systems (ETICS). 

Easy Application 


for ready-to-use tile adhesives.

Cost-Efficiency 


for exterior paints, renders and 

plasters. 

Longevity 


for cement admixtures. 

Find out more about: 

The general advantages of VINNAPAS ® 4 

Paint applications 10 

Product overview – paints 18 

Construction applications 24 

Product overview – construction 34 

In Europe, polymer binders were first used 

in the 1930s to improve the characteristics 

of mortars. WACKER was among the first to 

produce polymer dispersions and dispersible 

polymer powders for the paints and construction 

industries, sophisticating its portfolio for 

decades under the VINNAPAS ® tradename. 

Today, WACKER is a global market and technology 

leader with production sites on three 

continents and over 100 subsidiaries, sales 

offices and technical centers all over the world. 

VINNAPAS ® dispersions are co- and terpolymers 

based on vinyl acetate, ethylene and other 

monomers. Vinyl acetate-ethylene (VAE), in 

particular, combines technical performance with 

environmental benefits. The portfolio comprises 

many grades that are stabilized without the use 

of APEO-based surfactants and with low residual 

monomer content (< 500 ppm). 

To download or order the brochure 

“Product Overview Dispersible Powder Europe", 

printing number 6968, please go to 

www.wacker.com/publications 

3

WhAT dO yOU ExPECT 

fROM US? 

4 

Reliability 

You have no time or patience for mistakes? 

VINNAPAS ® is produced according to the same 

quality standards worldwide, securing a constant, 

reliable product performance. You can count 

on that as well as on our commitment to your 

success. This is what unites us with our 

customers – in some cases for decades of 

partnership. 

Sustainability 

We are dedicated members of the Responsible 

Care ® and the UN’s Global Compact programs. 

We also proactively support other initiatives and 

programs to reduce environmental impact. 

With our VINNAPAS ® dispersions, it is our goal 

to combine both ultimate performance and 

environmental excellence – reliably and 

comprehensively. You can be sure that our 

environmental achievements are always backed 

up by hard facts and objective criteria. 

See also: www.wacker.com/sustainability

Creativity Vision 

The status quo is never enough for you? You are 

constantly looking for ways to do things better? 

Then we could do this together. We are one of 

the most research-intensive chemical companies, 

strong in fundamental research as well as application-oriented 

innovation. Talk to us! 

With new VINNAPAS ® grades, we help to make 

new architectural and material solutions possible. 

See also: www.wacker.com/research 

Do you believe in collaboration? We see no way 

around it in an increasingly global surrounding. 

Not surprisingly, VINNAPAS ® was the seedling 

from which the WACKER ACADEMY grew into 

a worldwide unique platform for exchanging 

knowledge and ideas. Today, VINNAPAS ® is 

present in all key regions of the world, enabling 

us to learn from one another and to envision 

what quality of life should be like – for all of us. 

See also: www.wacker.com/wacker-academy 

5

MAKE ThE MOvE TO ThE 

TEChNOLOGy Of ThE fUTURE ... 

Solvents, vOC content and plasticizers in interior paints 

are just examples of the topics that are under discussion 

concerning the environmental impact of construction 

materials. WACKER recognized the importance of a low 

vOC content decades ago and developed specialized 

vINNAPAS ® vAE copolymer dispersions. 

Between the end of the 1980s and the early 

1990s, the main challenge was to reduce 

the VOC content without reducing the 

performance. The result was VINNAPAS ® VAE 

copolymer dispersions that combine many 

advantages: 

• Superior film formation without film-forming aids 

• Low residual monomer content 

• Low odor 

• Polymerization without APEO-containing 

substances 

• Low formaldehyde content 

More Performance with Fewer Ingredients 

VINNAPAS ® VAE dispersions provide excellent 

film-forming properties without the addition of 

coalescing agents. And they achieve this at very 

low temperatures of less than 5 °C. At the same 

time, it is possible to formulate interior paints that 

fulfill high standards of e.g. scrub or blocking resistance. 

This results in a favorable cost-in-use ratio. 

6 

Compliance with Strict Labels 

With our cutting-edge VINNAPAS ® VAE dispersions, 

the construction and paints industries are equipped 

to meet stringent governmental regulations, as well 

as the requirements of internationally recognized 

ecolabels and certifications, such as Blue Angel, EU 

Ecolabel, LEED and Green Seal. 

VAE dispersions are … 

… copolymers produced by the emulsion 

polymerization of the hard, polar monomer vinyl 

acetate and the soft, hydrophobic monomer 

ethylene. Ethylene functions as an optimal 

flexibilizer for vinyl acetate, which gives permanent 

flexibility to VAE polymers. No external 

plasticizer is thus necessary in VAEs.

... ANd TO 

SUPERIOR SERvICE 

Our services are as innovative as our products. 

They have consequently developed, too. In one 

direction: toward you and your needs. If you 

have any questions, please contact us. 

How do you want to order? 

We adapt to your needs. You can order electronically 

via our e-solution login4more.com, 

via ELEMICA or by traditional methods, such 

as fax or phone – whatever works best for you. 

Which delivery form suits you? 

It is your choice: VINNAPAS ® comes to you 

in small units for lab purposes, in special 

barrels, trains or tanks. 

Do you need technical advice? 

Our technical centers are located in all key 

regions and are fully equipped to assist you 

in adjusting formulations or testing products 

according to national and international 

standards. 

Do you want to talk to someone who 

really understands you? 

Our experts know our products – and your 

market. They speak your language and are 

at home in your region and industry. 

WACKER ACADEMY and Technical Centers: 

Our Global Network of Experts 

USA 

MExICO 

GERMANy 

BRAZIL 

UAE 

RUSSIA 

INdIA 

KOREA 

ChINA 

SINGAPORE 

AUSTRALIA 

7

vARIETy Of PAINTS ANd 

CONSTRUCTION APPLICATIONS 

8 

ExTERIOR PAINTS 

Page 12 

INTERIOR PAINTS 

Page 10 

INTUMESCENT & 

fIRE-RESISTANT PAINTS 

SPECIALTy PAINTS 

Page 16 

Page 14 

PRIMERS 

Page 24

RENdERS, PLASTERS & ETICS 

Page 28 

WATER PROOfING 

MEMBRANES 

Page 30 

REAdy-TO-USE TILE AdhESIvES 

Page 26 

CEMENT AdMIxTURES 

Page 32 

9

LOW vOC MEETS hIGh 

PERfORMANCE 

VINNAPAS ® VAE dispersions meet the highest 

technical demands and the environmental 

requirements of the most stringent ecolabels 

in Europe, the Middle East and Africa. 

General Benefits 

• High formulation versatility 

• Produced without APEO surfactants 

• Low to very low VOC formulations possible 

• Production advantages through grades 

with a higher solids content 

• High compatibility with slurries 

• Excellent scrub resistance 

• Favorable cost-in-use ratio 

Application Spectrum 

• Paints, textured coatings and plasters 

• From matt to semigloss and gloss finishes 

• Pastel or deep color paints 

10 

Fulfilling Tomorrow’s Demands Today 

The first modern paints were solvent-based with 

solvent/VOC contents of up to 70%. Later, waterborne 

paints with a considerably lower VOC 

content were developed. Today, coatings with a 

VOC content of < 700 ppm are state-of-the-art. 

The challenge is to reduce VOCs without compromising 

performance. VINNAPAS ® VAE copolymer 

dispersions do this via “hydrofication”: water takes 

the role of an internal flexibilizer, enhancing the 

coalescence of the polymer particles. They thus 

exhibit excellent film-forming characteristics 

without the addition of coalescing agents – even 

at temperatures well below 5 °C. 

Evolution of VOC Reduction in Architectural Coatings 

VOC (g/l) 

800 

700 

600 

500 

400 

300 

200 

100 

0 

1940 1950 1970 1990 2007 2010 

Solvent- Latex Clean Amend- CA Blue Angel 

borne Air Act ment

PROdUCT 

RECOMMENdATIONS 

Grade Product Benefit Performance Attributes 

VINNAPAS ® EP 3360 Excellent scrub resistance and high solids 

content, supports modern manufacturing 

processes 

VINNAPAS ® EP 3355 Current standard binder for environmentally 

friendly high-PVC paints 

VINNAPAS ® EF 3777 Low blocking in silk paints 

VINNAPAS ® EZ 3010 Standard binder that offers a good price/ 

performance ratio 

VINNAPAS ® CEZ 18 Broad formulation ability up to high 

pH values 

VINNAPAS ® LL 3019 Broad formulation ability up to high 

pH values and VC-free 

VINNAPAS ® EAF 380 Excellent gloss, low blocking and 

compatible with effect additives 

Excellent Good 

Please Note 

To find out about how VINNAPAS ® dispersions combine 

perfectly with SILRES ® BS additives, please download or 

order the flyer “Interior Paints/SILRES ® and VINNAPAS ® / 

Europe", printing number 6744, at 

www.wacker.com/publications 

Scrub 

Resistance 

INTERIOR 

PAINTS 

VINNAPAS ® VAE dispersions 

allow the combination of very 

low environmental impact 

with high performance at an 

advantageous cost/benefit 

ratio. 

Gloss 

Development 

Block 

Resistance 

Compatibility 

with Tinting Systems 

11

SAfEGUARdING 

ThE BUILdING STRUCTURE 

VINNAPAS ® dispersions extend the durability 

of houses by protecting the substrates. 



• Most grades produced without APEO surfactants 

• Low-VOC formulations possible 

• Excellent compatibility with pigment pastes 

• Excellent color stability 

• Ideal workability and applicability 

• High to very high durability 

• High flexibility with low dirt pick-up 

• Good water repellency 

• Good water-vapor permeability 


• Exterior masonry paints 

• Textured or structured coatings 

• Silicone resin emulsion paints 

• Silicate paints 

• Lime paints 

• Pastel or deep color paints 

• Elastomeric or crack-bridging systems 

12 

Combining Breathability and Low Flammability 

Exterior coatings are exposed to varying climatic 

conditions: it can be hot or cold, humid or dry in 

different combinations. This is accompanied by 

different degrees of UV radiation. VINNAPAS ® 

dispersions feature high water resistance combined 

with high mechanical strength, leading to 

outstanding exterior weathering behavior. They 

thus allow the formulation of coatings with a high 

resistance to dirt pick-up and long-lasting performance 

even when exposed to harsh conditions. 

VINNAPAS ® polymer dispersions based on vinyl 

acetate-ethylene-vinyl chloride additionally provide 

low flammability for flame-retardant formulations 

that match Fire Class B as per EN 13501-1. 

Exterior Weathering Test at Burghausen Test Fence 

Competitor VINNAPAS ® Competitor VINNAPAS ® 

Competitor VINNAPAS ® Competitor VINNAPAS ®

PROdUCT 



VINNAPAS ® LL 3019 Broad formulation ability 

up to high pH values and 

suitable for environmentally 

friendly paints 

VINNAPAS ® CEZ 18 Broad utility binder with 

excellent color stability 

VINNAPAS ® CEF 52 Binder for state-of-the-art 

formulations 

VINNAPAS ® SAF 34 Breathable in combination 

with SILRES ® for silicone 

resin emulsion paints 

VINNAPAS ® SAF 72 Low odor and breathable 

in combination with 

SILRES ® for silicone resin 

emulsion paints 


Some VINNAPAS ® dispersions are highly compatible 

with our SILRES ® Please Note 

BS silicone resins and therefore ideal 

for manufacturing silicone resin emulsion paints. 

Resistance 

to Dirt 

Pick-Up 

Hydrophobicity/ 

Water 

Resistance 

ExTERIOR 

PAINTS 

VINNAPAS ® VAE and S-A 

dispersions represent an 

attractive alternative to 

conventional acrylic and 

styrene-acrylic systems for 

exterior applications. 

Flexibility Color 

Stability 

Saponification/ 

Alkaline 

Resistance 

Flame 

Resistance 

Durability 

13

fIREPROOf 

SOLUTIONS 

Intumescent & Fire-Resistant Paints 

When in contact with fire, intumescent (swelling) 

coatings based on VINNAPAS ® dispersions burn 

to a firm foam with extremely low thermal conductivity, 

protecting steel beams, for example, for 

a predictable period of time. Fire-resistant paints 

based on vinyl-chloride-containing VINNAPAS ® 

terpolymers improve the fire-retardant effectiveness 

based on the self-extinguishing properties 

of chlorine. 


• Excellent foam development that provides 

high expansion factors for coatings with 

a low dry film thickness (DFT) 

• Good adhesion to steel beams 

• Excellent compatibility with intumescent 

coating additives 

• High shelf life of final intumescent coatings 

even under difficult climatic conditions 

• Manufactured without APEOs or plasticizers 

• Low amount of VOC and very low amount 

of formaldehyde 


• Fire-resistant, water-based paints or systems 

• Intumescent, water-based paints or systems 

14 

New: VINNAPAS ® LL 3112 

Intumescent fire protection coatings are used 

to protect steel girders in the event of a fire. The 

coating is usually applied one to four millimeters 

thick and, when subjected to heat, foams to tens 

of hundreds of times its original thickness, protecting 

the steel girders against the heat of the fire for 

a defined period. They thus retain their strength for 

longer. The new VINNAPAS ® LL 3112, based on 

vinyl acetate-ethylene-vinyl ester terpolymers, 

shows particularly pronounced foaming and 

expansion, as well as long-term foam stability. 

At the same time, the adhesion and strength of 

the intumescent coatings improve, so that the 

protective layer firmly adheres to the substrate 

and forms a heat barrier for a limited period. 

Without the binder, the foam layer would be too 

brittle and would have inadequate adhesion to 

the steel substrate. 

High-rise buildings, 

abundant in tomorrow’s 

megacities, are built high. 

The steel skeletons of 

these constructions must 

be protected against fire. 

Otherwise, they could bend 

and collapse within five to 

ten minutes.

PROdUCT 


Intumescent Paints 


Foam Foam Stability/ 

Development Integrity 

VINNAPAS ® LL 3112 Premier binder that combines 

the highest performance and 

broadest applicability 

VINNAPAS ® EZ 3010 Standard binder that offers 

a good price/performance 

ratio 

INTUMESCENT & 

fIRE-RESISTANT 

PAINTS 

VINNAPAS ® VAE dispersions 

allow the formulation of 

reliable, state-of-the-art 

intumescent and fireresistant 

paints. 

Paint Storage 

Stability under 

Demanding 

Conditions 

Broad 

Formulation 

Ability 

Fire-Resistant Paints 


Flame Retardancy Hydrophobicity Flexibility 

VINNAPAS ® CEF 52 Excellent inherent 

fire-resistant properties 

VINNAPAS ® CEZ 18 General-purpose binder 

with good fire-resistant 

properties 


With SILRES ® Please Note 

MPF 52E, WACKER offers a water-based, 

alkoxy-functional silicone resin emulsion that significantly 

improves the heat resistance of binders. 

Dry Film 

Thickness (DFT) 

Efficiency 

15

SUPERIOR SOLUTIONS fOR 

SPECIAL APPLICATIONS 

The VINNAPAS ® dispersion technology is a 

suitable base for a wide range of products, 

offering an adapted, technically convenient 

solution, which is very often also an environmentally 

friendly one. 



• Most grades produced without APEO surfactants 

• Low-VOC formulations/low-emission specialty 

coatings possible 


• Oil-resistant coatings 

• Substrate preparation and impregnation 

• Roof paints 

• Joint compounds 

16

PROdUCT 


SPECIALTy 

PAINTS 

VINNAPAS ® dispersions 

can also be helpful in 

a wide variety of niche, 

but critical, specialty 

applications. 

Oil-Resistant Paints 


Barrier Efficiency Flexibility Ease of Use 

VINNAPAS ® EP 16 Excellent oil barrier properties 

Substrate Preparation 


Penetration Adhesion to 

Critical Substrates 

VINNAPAS ® SAF 608 Binder for surface preparation 

with excellent penetration and 

consolidation power 

Flexibility Water Compatibility with 

Resistance Final Paint Systems 

Roof Paints 


Flexibility Water Resistance Durability UV-Light Resistance 

VINNAPAS ® SAF 34 Binder for durable, waterresistant 

roof coatings 

VINNAPAS ® SAF 72 Plasticizer-free binder for 

durable, water-resistant 

roof coatings 

Joint Compounds 


Flexibility Water 

Resistance 

VINNAPAS ® EP 3410 High suitability for joint 

compounds 


Compatibility with 

Final Paint Systems 

Broad Formulation 

Ability 

Adhesion 

17

VInnapas ® DIspersIons 

for paInts 

Grade Product Benefit Recommended Applications Typical General Properties 1 Grade 

18 

Interior Applications Exterior Applications Specialty Applications 

Flat 

Paints 

Silk 

Paints 

Gloss 

Paints 

Plasters 

and Textured 

Paints 

Pastel or Deep 

Color Paints 

Masonry 

Paints 

Textured 

Paints 

Elastomeric/ 

Crack-Bridging 

Paints 

Silicate 

Paints 

Silicone 

Resin 

Emulsion 

Paints 

Pastel or 

Deep Color 

Paints 

Vinyl Acetate-Ethylene Copolymer Dispersions 

VINNAPAS ® CEF 10 All-around dispersion for conventional coalesced paints VAc-E-VC 50% 2,700 ± 800 5 – 7.5 16 °C 5 °C 0.1 µm ST4 VINNAPAS ® CEF 10 

VINNAPAS ® CEF 50 All-around dispersion for conventional coalesced paints VC-E-A 51% 1,700 ± 800 7.5 – 8.5 20 °C 17 °C 0.1 µm ST4 VINNAPAS ® CEF 50 

VINNAPAS ® CEF 52 Binder for high-quality exterior applications with fire 

resistance properties 

VC-E-VE 60% 5,500 ± 2,500 7 – 9 14 °C 7 °C 0.3 µm ST VINNAPAS ® CEF 52 

VINNAPAS ® CEZ 18 General-purpose binder for interior and exterior paints VAc-E-VC 50% 12,000 ± 3,000 4 – 5 7 °C 2 °C 0.7 µm CD & ST VINNAPAS ® CEZ 18 

VINNAPAS ® EAF 380 Binder for gloss and effect paints VAc-E-A 51% 1,100 ± 500 7 – 9 12 °C 8 °C 0.3 µm ST VINNAPAS ® EAF 380 

VINNAPAS ® EF 3777 Binder with excellent blocking properties for medium- 

PVC, environmentally friendly paints 

VAc-E 56% 1,000 ± 850 3.5 – 5.5 10 °C 1 °C 0.2 µm ST VINNAPAS ® EF 3777 

VINNAPAS ® EP 16 Binder with excellent oil barrier properties VAc-E 50% 9,000 ± 3,000 4 – 5 1 °C 0 °C 1 µm PVOH & ST4 VINNAPAS ® EP 16 

VINNAPAS ® EP 3355 Binder with high scrub resistance at high PVC levels VAc-E 55% 1,500 ± 1,000 4 – 6 10 °C 2 °C 0.3 µm PVOH & ST VINNAPAS ® EP 3355 

VINNAPAS ® EP 3360 Superior binding power for modern high-performance 

and high-PVC, environmentally friendly paints 

VAc-E 60% 4,500 ± 1,500 4 – 6 10 °C 2 °C 0.3 µm PVOH & ST VINNAPAS ® EP 3360 

VINNAPAS ® EP 3410 Binder particularly recommended for joint compounds VAc-E 55% 4,000 ± 1,000 4 – 5 5 °C 0 °C 0.8 µm PVOH & ST VINNAPAS ® EP 3410 

VINNAPAS ® EZ 3010 Standard binder that offers a good price/performance ratio VAc-E 55% 4,300 ± 1,600 4.5 – 5.5 7 °C 0 °C 0.4 µm CD & ST VINNAPAS ® EZ 3010 

VINNAPAS ® LL 3019 General-purpose binder for interior and exterior VC-free 

and environmentally friendly paints 

VAc-E-VE 50% 3,000 ± 900 4.5 – 5.5 11 °C 2 °C 0.3 µm CD & ST VINNAPAS ® LL 3019 

VINNAPAS ® LL 3112 Premier binder that combines the highest performance and 

broadest applicability 

VAc-E-VE 50% 2,900 ±1,100 4.5 – 5.5 9 °C 0 °C 0.4 µm CD & ST VINNAPAS ® LL 3112 

Styrene-Acrylate Copolymer Dispersions 

VINNAPAS ® SAF 34 Breathable in combination with SILRES ® S-A 50% 9,000 ± 3,000 7.5 – 8.5 20 °C 12 °C 0.1 µm ST VINNAPAS ® SAF 34 

VINNAPAS ® SAF 72 Low odor and breathable in combination with SILRES ® S-A 50% 2,500 ± 1,000 7.5 – 8.3 18 °C 23 °C 0.1 µm ST VINNAPAS ® SAF 72 

VINNAPAS ® SAF 608 Excellent penetration S-A 50% 1,850 ± 1,150 7 – 8 0 °C 0 °C 0.1 µm ST VINNAPAS ® SAF 608 

Highly recommended recommended 

Intumescent 

Paints 

Fire- 

Resistant 

Paints 

Oil- 

Resistant 

Paints 

Substrate 

Preparation 

Roof 

Paints 

Joint 

Compounds 

Polymer 

Base 2 

Solids 

content 

+/- 1% 5 

1 these figures are only intended 

as a guide and are not part of 

supply specifications. 

2 Vac= vinyl acetate 

a = acrylate 

e = ethylene 

s = styrene 

VC = vinyl chloride 

Ve = vinyl ester 

Viscosity, 

Brookfield 

(mPa.s) 

pH 

Value 

3 pVoH = polyvinyl alcohol 

CD = cellulosic derivative 

st = surfactant 

4 Contains apeo surfactants 

5 residue after drying 

6 approximately 

Glass 

Transition 

Temperature 

Tg (DSC) 6 

Minimum 

Film-Forming 

Temperature 

(ISO 2115) 6 

Predominant 

Particle 

Size 6 

Low-VOC 

& SVOC 

Paints 

Please Note 

Stabilization 

System 3 

This table only reflects a part of our product range. 

For more choice, please contact us: 

Infoline: +49 89 6279-1741, info@wacker.com 

19 20

Hydrophobization 

Adhesion 

Insulation 

vINNAPAS ® dISPERSIONS 

fOR ThE CONSTRUCTION INdUSTRy 

22 

Sealing 

Esthetics

Go for the Optimum! 

Polymer and silicone chemistry have changed the construction industry 

worldwide. WACKER offers you this expertise in a unique way. WACKER is: 

• A worldwide leader in polymer binders for construction materials 

• One of the biggest silicone producers worldwide 

• Close to you through native expert staff 

• And offers individual technical assistance and trainings through our 

technical centers and the WACKER ACADEMY in all key regions. 

Profit from a Comprehensive Portfolio 

Our diversified product portfolio and know-how in organic and inorganic 

chemistry enables us to recommend and develop optimum customized 

solutions independent of technologies. 

Find out more about our solutions for the 

construction industry at 

www.wacker.com/construction 

23

ThE BASIS fOR 

QUALITy 

VINNAPAS ® dispersions provide primers 

with the necessary properties for the 

next layer to function properly. 


• Good impregnation due to high penetration 

into pores 

• Excellent barrier properties 

• Low and uniform absorbency 

• Good adhesion of emulsion paints and coatings 

even on critical substrates 

• High compatibility with different substrates 

• Good consolidation of construction surfaces 

• Bridging of small cracks 


• Adhesion-promoting layer 

• Equalization of low absorption properties 

• Barrier layer for migration protection 

• Construction surface consolidation 

• Stain blocking/resistance 

Ideal for Many Applications 

Most buildings are built one layer upon the next. 

Primers are essential to ensure the long-term 

durability of each subsequent layer, either for 

interior or exterior applications. Under outdoor 

conditions, primers require high water repellency 

and good barrier properties, which is where 

hydrophobic dispersions such as VINNAPAS ® are 

24 

needed. Dispersions with small particles penetrate 

well into the surface and consolidate open-pore 

substrates such as concrete, cement and gypsum 

plasterboards and control the absorbency of the 

substrate. 

Test Method: Application of 2 g Dispersion 

Penetration Potential of Primer Dispersion as 

Deep Sealer 

Weight [g] of bound CaCO 3 

3.2 

2.8 

2.4 

2.0 

1.6 

1.2 

0.8 

0.4 

0 

Calcium carbonate bound by product 

Compacted calcium carbonate 

VINNAPAS ® 

240 HD 

VINNAPAS ® 

202 HD 

Tested at 10% solids content 

VINNAPAS ® 

224 HD 

Standard 

dispersion 

Penetration potential of 2 g 

of a 10% dispersion. 

Depending on the dispersion 

properties, the penetration 

potential in the CaCO 3 matrix 

and the bonding capacity are 

different.

PROdUCT 



Penetration Regulation of 

Absorbency 

VINNAPAS ® 240 HD High-performance primer 

with broad utility 

VINNAPAS ® 202 HD Low-VOC primer that 

provides maximum 

freedom in the choice 

of coalescing agents 

VINNAPAS ® 224 HD Proven benchmark for 

primers 


PRIMERS 


confer the right properties 

on primers as precursors for 

a variety of applications. 

Surface 

Consolidation 

Adhesion on 

Critical Substrates 

Flexibility Water 

Resistance 

25

SAvING MATERIAL, 

TIME ANd RESOURCES 

VINNAPAS ® dispersions enhance adhesion 

even to difficult substrates and improve 

the workability of tile adhesives. 


• Good compatibility with pigments and fillers 

• Excellent workability 

• High shear strength even under humid and 

wet conditions 

• Good adhesion to difficult substrates such as 

chipboards, gypsum boards and tiles 

• Excellent slip resistance in the formulation 

• High filler load 

• Long correction time 


• D1 tile adhesives (as per EN 12004) 

• D2 tile adhesives (as per EN 12004) 

26 

Perfect under Wet Conditions 

Traditionally, in some European countries, readyto-use 

tile adhesives are dominant for laying tiles. 

Especially in the case of renovation, advantages 

regarding ease of use and cleanness of the working 

area are obvious. VINNAPAS ® dispersions provide 

high binding power and cohesion as well as 

excellent adhesive strength even under humid 

and wet conditions. 

Shear bond strength @ wet [N/mm 2 ] 

VINNAPAS ® Dispersions for D2 Ready-to-Use 

Tile Adhesives (as per EN 1324) 

1.4 

1.2 

1.0 

0.8 

0.6 

0.4 

0.2 

0 

VINNAPAS ® 

202 HD 

VINNAPAS ® 

224 HD 

VINNAPAS ® 

240 HD 

Shear bond strength after water storage 

Standard 

S-A dispersion

PROdUCT 



VINNAPAS ® 202 HD Product without ammonia that 

provides maximum freedom 

in the choice of coalescing 

agents 

VINNAPAS ® 240 HD Optimal combination of 

high performance and 

ecological aspects 

(fulfills EMICODE ® EC1) 

VINNAPAS ® 224 HD The proven benchmark 

for D2 tile adhesives 

VINNAPAS ® 523 ND A product with a high cohesive 

force and versatility 


Please Note 

We also offer VINNAPAS ® dispersible polymer powders 

for one-component cementitious tile adhesives. 

For joint-sealing compounds, our portfolio includes 

SILRES ® BS silicone resin binders and additives. 

Find out more about VINNAPAS ® polymer powders 

and SILRES ® BS at www.wacker.com/construction 

Class D1 

(EN 12004) 

Class D2 

(EN 12004) 

REAdy-TO-USE 

TILE AdhESIvES 


combine strong adhesion 

with flexibility and allow 

secure and durable tiling. 

Filler Load Slip Resistance Low Emission 

27

PROTECTING BUILdINGS – 

SAvING ENERGy 

VINNAPAS ® dispersions improve essential 

characteristics of renders and plasters, 

securing a durable and efficient coating. 


• Good adhesion (on masonry, concrete and 

EPS panels) and flexibility at the same time 

• Good compatibility toward cement and 

alkaline surfaces 

• Excellent hydrophobicity/weatherability 

• High flame retardancy 

(particularly VC containing terpolymers) 

• High impact resistance 


• Two-component adhesive mortars 

• Two-component or ready-to-use 

embedding mortars/base coats 

• Synthetic resin-bound renders 

• Silicate-bound renders 

• Silicone-bound renders 

28 

External Thermal Insulation Composite 

Systems (ETICS): Sustainability Starts Here 

Worldwide, 40% of primary energy is used for 

buildings. Up to 70% of heating energy could 

be saved through insulation. The most effective 

way is to insulate walls from the outside, e.g. 

with ETICS. 

Advantages of VAc-E Copolymers 

A major challenge with ETICS has been that 

cementitious materials do not adhere to organic 

insulation materials such as polystyrene. Ethylene 

exhibits exceptionally good adhesion to EPS, 

which is why VINNAPAS ® VAE dispersions are 

especially suitable. VINNAPAS ® VC-VAc-E grades 

additionally exhibit high flame retardancy, compared 

to styrene acrylics, for example. 

VINNAPAS ® Dispersions for ETICS 

Components Flammability 

Flammability/self-extinguishing 

properties [sec.] 

70 

60 

50 

40 

30 

20 

10 

0 

VINNAPAS ® 

822 HD 

VINNAPAS ® 

828 ND 

VINNAPAS ® 

LL 3019 

Without flame retarder With flame retarder 

Standard 

S-A dispersion

PROdUCT 


RENdERS, 

PLASTERS 

& ETICS 

VINNAPAS ® dispersions provide 

renders and plasters 

with the necessary properties 

for long-term durability and 

functionality, e.g. in ETICS. 

Adhesives & Base Coats 


Flame Resistance Flexibility Hydrophobicity Cement Compatibility 

VINNAPAS ® 828 ND A proven all-rounder with 

special rheological qualities 

VINNAPAS ® 822 HD Excellent hydrophobic 

product with high versatility 

VINNAPAS ® LL 3019 Hydrophobic binder with 

special rheological properties 

VINNAPAS ® 202 HD Solvent-free, hydrophobic 

product with high adhesive 

and cohesive strength 

VINNAPAS ® 224 HD Proven benchmark for 

ready-to-use tile adhesives 

and embedding mortars 

Top Coats & Renders/Plasters 


Synthetic Resin- Silicone-Bound 

Bound Renders Renders 

VINNAPAS ® 828 ND A proven all-rounder with good 

fire resistance properties and 

special rheological qualities 

VINNAPAS ® 822 HD Excellent hydrophobic product 

with very low flammability 

VINNAPAS ® LL 3019 Hydrophobic all-rounder with 

good color stability 

VINNAPAS ® 202 HD Product without ammonia that 

provides maximum freedom in 

the choice of coalescing agents 

VINNAPAS ® 224 HD Proven benchmark for a wide 

range of applications 


Silicate-Bound 

Renders 

Resistance to 

Dirt Pick-Up 

Color 

Stability 

Durability 

29

ThE WATERTIGhT 

SOLUTION 

VINNAPAS ® -modified water proofing 

membranes reliably keep water out 

and in. These highly elastic membranes 

are also able to bridge cracks. 


• Improvement of adhesion and cohesion 

• Significant increase in flexibility 

• High resistance to hydrostatic water pressure 

• Significant increase of crack-bridging ability 

even at low temperatures 

• Vapor permeability 

• Excellent compatibility with cement 


• One-component, ready-to-use water proofing 

membranes (1K DM WPM) 

• Two-component, cementitious water proofing 

membranes (2K cementitious WPM) 

• Water proofing membranes for all kinds of wet 

rooms (e.g. bathrooms, swimming pools and 

wellness areas) and for wastewater drains, 

water reservoirs and tanks. 

30 

Setting the Standard 

Special VINNAPAS ® grades additionally improve 

mechanical properties and stay highly elastic even 

at low temperatures. They can be used to formulate 

two-component, cementitious as well as one-component, 

DM water proofing membranes that fulfill 

EN 14891 and ETAG 022 requirements. 

Crack-bridging test according to WACKER internal test method. Water proofing membrane 

after liquid water impermeability 

test (according to 

EN 14891 and ETAG 022) – 

observation of moisture 

penetration.

PROdUCT 



VINNAPAS ® 240 HD Optimal combination of 

high performance and 

ecological aspects 

(fulfills EMICODE ® EC1) 

VINNAPAS ® 250 ED Highly flexible product 

for excellent crack-bridging 

properties 


Please Note 

We also offer VINNAPAS ® dispersible polymer powders 

for water proofing membranes. With GENIOSIL ® WP, 

our portfolio comprises hybrid polymers for ready-touse, 

liquid, solvent- and plasticizer-free water proofing 

membranes. 

To download or order the brochure “Product Overview 

Dispersible Powder Europe”, printing number 6968, 

please go to www.wacker.com/publications 

Dispersion Mortar 

DM (EN 14891) 

Cement Mortar 

CM (EN 14891) 

WATER 

PROOfING 

MEMBRANES 


stand for reliable barriers 

against water, even 

under pressure and at 

low temperatures. 

Flexibility Adhesion 

31

AddING PERfORMANCE 

ON SITE 

VINNAPAS ® dispersions are ideal for 

modification of all kinds of mortars 

or grouts, improving their properties, 

especially in critical applications. 


• Excellent compatibility with cement 

• Increase of flexural strength and reduction 

of elastic modulus 

• High cohesive strength 

• Excellent workability with long pot life 

32 


• Modification of “on-site mortars” 

• “Add-on” dispersions to improve adhesion, 

cohesion and durability of critical substrates 

or to meet increased requirements 

Improved Performance 

Special VINNAPAS ® grades can additionally be 

used to specifically increase mechanical strength, 

flexibility, crack-bridging, water uptake, and 

lower flammability. 

Cement admixtures modified with VINNAPAS ® dispersions are 

easy to use and provide the basis for a variety of applications.

PROdUCT 



Flexibility Adhesion Hydrophobicity E-Modulus 

Reduction 

VINNAPAS ® 530 ND A product that reduces 

the elastic modulus and 

enhances adhesion 

VINNAPAS ® 822 HD Excellent hydrophobic 

product with high 

versatility 

VINNAPAS ® 825 ED All-rounder with high 

mechanical strength 

VINNAPAS ® 250 ED Highly flexible product 

for excellent crackbridging 

properties 


CEMENT 

AdMIxTURES 


can be used to improve 

placing, pumping, finishing, 

appearance and performance 

characteristics as desired. 

Flexural 

Strength 

Pot Life 

33

Vinnapas ® dispersions 

for construction 

Grade Product Benefit Recommended Applications Typical General Properties 1 Grade 

34 

Primers Ready-to-Use 

Tile Adhesives 

External Thermal Insulation 

Composite Systems (ETICS) 

Renders/Plasters Water Proofing Membranes Cement Admixtures Polymer 

Base 2 

Vinyl Acetate-Ethylene Copolymer Dispersions 

VINNAPAS ® 523 ND A product with a high cohesive force and versatility VAc-E 60% 4,500 ± 1,500 4 – 6 10 °C 2 °C 0.3 µm PVOH & ST VINNAPAS ® 523 ND 

VINNAPAS ® 530 ND A product that reduces the elastic modulus and 

enhances adhesion 

VAc-E 55% 2,400 ± 400 4 – 5 5 °C 0 °C 0.9 µm PVOH VINNAPAS ® 530 ND 

VINNAPAS ® LL 3019 Hydrophobic all-rounder with good color stability VAc-E-VE 50% 3,000 ± 900 4.5 – 5.5 11 °C 2 °C 0.3 µm CD & ST VINNAPAS ® LL 3019 

VINNAPAS ® 810 ND A proven all-rounder with basic hydrophobicity VC-E-A 50% 1,700 ± 800 7.5 – 8.5 20 °C 17 °C 0.1 µm ST4 VINNAPAS ® 810 ND 

VINNAPAS ® 822 HD Excellent hydrophobic properties with very 

low flammability 

VC-E-VE 60% 5,500 ± 2,500 7 – 9 14 °C 7 °C 0.3 µm ST VINNAPAS ® 822 HD 

VINNAPAS ® 825 ED All-rounder with high mechanical strength VC-E-VAc 50% 2,000 ± 1,500 4.5 – 7.5 10 °C 7 °C 0.8 µm PVOH VINNAPAS ® 825 ED 

VINNAPAS ® 828 ND A proven all-rounder with good fire resistance 

properties and special rheological qualities 

VAc-E-VC 50% 12,000 ± 3,000 4 – 5 7 °C 2 °C 0.7 µm CD & ST VINNAPAS ® 828 ND 

Styrene-Acrylate Copolymer Dispersions 

VINNAPAS ® 202 HD Product without ammonia that provides maximum 

freedom in the choice of coalescing agents 

S-A 50% 2,500 ± 1,000 7.5 – 8.3 18 °C 23 °C 0.1 µm ST VINNAPAS ® 202 HD 

VINNAPAS ® 224 HD Proven benchmark for a wide range of applications S-A 50% 9,000 ± 3,000 7.5 – 8.5 20 °C 12 °C 0.1 µm ST VINNAPAS ® 224 HD 

VINNAPAS ® 240 HD Optimal combination of high performance and ecological 

aspects (fulfills EMICODE ® EC1) 

S-A 50% 1,850 ± 1,150 7 – 8 0 °C 0 °C 0.1 µm ST VINNAPAS ® 240 HD 

VINNAPAS ® 250 ED Highly flexible product for excellent crack-bridging 

properties 

S-A 50.5% 14,000 ± 4,000 7.5 – 8.5 -7 °C 0 °C 0.1 µm ST VINNAPAS ® 250 ED 

Highly recommended recommended 

35 

Solids 

Content 

+/- 1% 5 

1 these figures are only intended 

as a guide and are not part of 

supply specifications. 

2 Vac= vinyl acetate 

a = acrylate 

e = ethylene 

s = styrene 

Vc = vinyl chloride 

Ve = vinyl ester 

Viscosity, 

Brookfield 

(mPa.s) 

pH 

Value 

3 pVoH = polyvinyl alcohol 

cd = cellulosic derivative 

st = surfactant 

4 contains apeo surfactants 

5 residue after drying 

6 approximately 

Glass 

Transition 

Temperature 

Tg (DSC) 6 

Minimum 

Film-Forming 

Temperature 

(ISO 2115) 6 

Predominant 

Particle 

Size 6 

Low-VOC 

& SVOC 

Paints 

Stabilization 

System 3 

Please Note 

This table only reflects a part of our product range. 

For more choice, please contact us: 

Infoline: +49 89 6279-1741, info@wacker.com 

36

WE LOvE QUESTIONS. 

WhAT ARE yOURS? 

How is your specific paint formulation best adapted 

to new environmental regulations? Or to legislation 

in another country? Does your bestseller product from 

France also perform in Russia? Which megatrends 

will accompany us through the next decades? 

What can we learn from the way other cultures see 

architecture and construction? 

At WACKER, we are driven by these questions. 

That is why we have developed tools to deal 

with them. 

38 

Technical Assistance at Your Doorstep – 

and Around the Globe. 

Our technical centers are situated around the 

globe, equipped with state-of-the-art testing 

facilities and regional experts that know their 

market. They know how products perform in 

different climatic zones and with different raw 

materials. Thus they can help you find answers 

fast and ingeniously. 

Knowledge 

Our WACKER ACADEMY was established as a 

knowledge platform for construction experts. 

It gives you the opportunity to meet people, to 

learn, to train, to share and discuss what matters 

to you – in a global context and an expert network 

with focus on your local needs. Try us! We love 

your questions.

ExpErtisE and sErvicE nEtwork 

on FivE continEnts 

WACKER is one of the world’s leading 

and most research-intensive chemical 

companies, with total sales of €4.63 billion. 

Products range from silicones, binders 

and polymer additives for diverse industrial 

sectors to bio-engineered pharmaceutical 

actives and hyperpure silicon for 

semiconductor and solar applications. As 

a technology leader focusing on sustain- 

ability, WACKER promotes products and 

ideas that offer a high value-added 

potential to ensure that current and future 

generations enjoy a better quality of life 

based on energy efficiency and protection 

of the climate and environment. Spanning 

all figures are based on fiscal 2012. 

the globe with five business divisions, 

operating 24 production sites, WACKER is 

currently active in over 100 countries. The 

Group maintains subsidiaries and sales 

offices in 29 countries across Europe, the 

Americas and Asia – including a solidly 

established presence in China. With a 

workforce of 16,300, WACKER sees itself 

as a reliable innovation partner that 

develops trailblazing solutions for, and in 

collaboration with, its customers. WACKER 

also helps them boost their own success. 

Our technical centers employ local 

specialists who assist customers world- 

wide in the development of products 

• sales and production sites, plus 20 technical 

centers, ensure you a local presence worldwide. 

tailored to regional demands, supporting 

them during every stage of their complex 

production processes, if required. 

WACKER e-solutions are online services 

provided via our customer portal and as 

integrated process solutions. Our 

customers and business partners thus 

benefit from comprehensive information 

and reliable service to enable projects 

and orders to be handled fast, reliably 

and highly efficiently. Visit us anywhere, 

anytime around the world at: 

www.wacker.com 

39

Wacker Chemie AG 

Hanns-Seidel-Platz 4 

81737 München, Germany 

Tel. +49 89 6279-1741 

Fax +49 89 6279-1770 

info@wacker.com 

www.wacker.com 

www.wacker.com/vinnapas 

www.wacker.com/construction 

Wacker Chemicals Middle East FZE 

Dubai Silicon Oasis 

Dubai 

United Arab Emirates 

Tel. +971 4 709-9999 

info.dubai@wacker.com 

The data presented in this brochure are in accordance with the present state of our knowledge but do not absolve the user from carefully checking all supplies immediately on 

receipt. We reserve the right to alter product constants within the scope of technical progress or new developments. The recommendations made in this brochure should be 

checked by preliminary trials because of conditions during processing over which we have no control, especially where other companies’ raw materials are also being used. 

The information provided by us does not absolve the user from the obligation of investigating the possibility of infringement of third parties’ rights and, if necessary, clarifying 

the position. Recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the product for a particular purpose. 

6997e/05.13 replaces 6997e/03.13

PDF | 4.9 MB - Wacker Chemie

Create successful ePaper yourself

Delete template?

Save as template?