Process Integral Development Eng&Tech - Equilabo.com

Recommendations

Info

European Directives PED - Directive 97/23/EC 28 ISO 9001:2000 ISO 14001:2004 Our equipments meet the Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment. Conformity asessment applied procedures, according to the equipment category: Equipment Category Asessment Module CONFORMITY ASESSMENT PROCEDURES I A Internal production control II A1 Internal manufacturing checks with monitoring of the final asessment III B+C1 EC Type-examination + Conformity to type IV B+F EC Type-examination + Product verification Unit G EC Unit verification EMC - Directive 2004/108/EC (and former Directive 89/336/EEC modified by the Directives 91/263/CEE, 92/31/CEE, 93/68/CEE and 93/97/CEE) Our equipments meet the European Directive 2004/108/EC on the approximation of the laws of the Member States relating to Electromagnetic Compatibility. Its conformity has been checked with the Harmonized Standard EN 61326:1997 (and its amendments EN 61326/A1:1998 and EN 61326/A2:2001) for "Electrical equipment for measurement, control and laboratory use – EMC requirements" approved by the European Standardisation Organisation CENELEC. Tests of EMC immunity according to the standard EN 61326: - EN 61000-4-2: Electrostatic discharge immunity test. - EN 61000-4-3: Radiated, radio-frequency, electromagnetic field immunity test. - EN 61000-4-4: Electrical fast transient/burst immunity test. - EN 61000-4-5: Surge immunity test. - EN 61000-4-6: Immunity to conducted disturbances, induced by radio-frequency fields. - EN 61000-4-11: Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests.
Tests of EMC emission according to the standard EN 61326: - EN 61000-3-2: Limits for harmonic current emissions (equipment input current up to and including 16 A per phase). - EN 61000-3-3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current
Page 1: PROCESS INTEGRAL DEVELOPMENT ENG&TE
Page 4 and 5: The MICROACTIVITY-Reference is an a
Page 6 and 7: The reference in modular catalytic
Page 8 and 9: and the options… Starting with a
Page 10 and 11: Catal ysts for Chlorinated VOCs Aba
Page 12: Pd-modifie d Cu-Zn c at alys t for
Page 17 and 18: SUPERCRITICAL EXTRACTION SF PID Eng
Page 19 and 20: EXPERIMENTAL CONDITIONS This system
Page 21 and 22: Quartz tubular reactor described in
Page 23 and 24: POLYMERIZATION MICROPLANT PI DIAGRA
Page 25 and 26: PID Eng&Tech was born as a spin-off
Page 27: PID Eng&Tech experiences continuous

Process Integral Development Eng&Tech - Equilabo.com

Create successful ePaper yourself

Delete template?

Save as template?