Datavideo SE-2800 Instruction Manual A4 - Holdan.eu

Switcher tab
This first tab can be used to choose the method of
connection between the computer and the switcher.
In this case the SE-2800 is connected using selected
Ethernet IP addresses.
Note that the first three numbers in the IP addresses
of the switcher and computer should be the same.
The last number in each IP address should be
unique.
If you are connecting for the first time you may be
asked by the computer to change the firewall setting
to allow this application to connect to the switcher.
Profiles
It is possible to store the current profile or settings of the switcher to your computer. This file can then be restored
to the machine at a later date allowing simple configuration of the unit. Depending on the included levels of the
profile this save process may take some time to complete.
Settings tab
The settings tab is another way to change the menu
settings of the switcher. The options may appear in a
slightly different order to those in the onscreen menu
described on page 17.
Each menu option can be expanded by clicking on the
plus sign in the left hand pane. The right hand pane
shows any values which can be changed.
Input settings tab
The Input settings tab allows each input to be
configured from the computer.
Note due to the design of the switcher different inputs
may have more or less options as they are not all the
same. See page 9, Video Input Module.
Each menu option can be expanded by clicking on the
plus sign in the left hand pane. The right hand pane
shows any values which can be changed.
26