Brides hydrauliques - Fr.stauff.com

OBTURATEURS (OBAG)
Flanges Plug
BRIDES HYDRAULIQUES/FLANGES
ISO 6162-1 -S.A.E. 3000 – ISO 6164 - CETOP / 250 ISO 6162-2 - S.A.E. 6000 – ISO 6164 - CETOP / 400
REFERENCES DN Ø C H L REFERENCES DN Ø C H L
OBAG-250-3000-3/8" 10 24.5 18 15 OBAG-400-3/8" 10 26 18 18
OBAG-250-3000-1/2" 13 30.5 24 15 OBAG-400-6000-1/2" 13 32 24 19
OBAG-250-3000-3/4" 19 38.4 31.5 16 OBAG-400-3/4" 19 39.5 32 21
OBAG-250-3000-1" 25 44.7 38 18 OBAG-6000-3/4" 19 41.6 32 21
OBAG-250-3000-1"1/4 32 51.1 43 18 OBAG-400-6000-1" 25 47.9 38 26
OBAG-250-3000-1"1/2 38 60.6 50 18 OBAG-400-6000-1"1/4 32 54.3 43.8 31
OBAG-250-3000-2" 51 71.4 61.8 21 OBAG-400-6000-1"1/2 38 63.8 50.8 34
OBAG-250-2"1/2 64 87.2 76 21 OBAG-400-6000-2" 51 79.4 66.5 42
OBAG-3000-2"1/2 64 84.1 73.8 21 OBAG-400-2"1/2 56 94.2 80 47
OBAG-250-3000-3" 76 101.6 90 24 OBAG-400-3" 63 104 90 54
OBAG-250-3"1/2 89 119 102 45 OBAG-400-3"1/2 70 119 102 61
OBAG-3000-3"1/2 89 114.2 102 45 OBAG-400-4" 80 131 114 61
OBAG-250-4" 102 131 114 55
OBAG-3000-4" 102 127 114 55
ADAPTEURS (AD)
Adaptors (AD)
ADAPTEURS SOCKET WELDING PASSAGE INTEGRAL
Socket Welding Adaptors
REFERENCES DN Ø EXTERIEUR DU TUBE Ø A Ø C Ø L1 Ø L2 K L
MM GAZ SCHD
AD-SWI/BW-1/2"-20.5 13 20 20.5 30 22 13 13 30
AD-SWI/BW-1/2"-21.7 13 21.25 21.34 21.7 30 22 13 13 30
AD-SWI/BW-3/4"-25.5 19 25 25.5 35 28 19 13 30
AD-SWI/BW-3/4"-27.3 19 26.75 26.68 27.3 35 28 19 13 30
AD-SWI/BW-1"-30.5 25 30 30.5 44 35 25 16 35
AD-SWI/BW-1"-32.5 25 32 32.5 44 35 25 16 35
AD-SWI/BW-1"-34 25 33.50 33.40 34 44 35 25 16 35
AD-SWI/BW-1"35.5 25 35 35.5 44 35 25 16 35
AD-SWI/BW-1"1/4-38.5 32 38 38.5 55 43 32 18 45
AD-SWI/BW-1"1/4-40.5 32 40 40.5 55 43 32 18 45
AD-SWI/BW-1"1/4-43 32 42 42.25 42.16 43 55 43 32 18 45
AD-SWI/BW-1"1/2-49 38 48 48.25 48.26 49 63 50 38 20 50
AD-SWI/BW-1"1/2-50.4 38 50 50.4 63 50 38 20 50
AD-SWI/BW-2"-61 51 60 60.30 60.32 61 79 62 47 22 55
AD-SWI/BW-2"65.8 51 65 65.8 79 62 47 22 55
- Adapteurs permettant, après soudure, de transformer un collet Butt Welding en collet Socket Welding avec emmanchement de
tube, selon croquis ci-dessus.
- A souder sur collet Butt Welding de même DN
- Adapters allowing after welding a Butt Welding flang head to be changed to a Socket Welding flange head with pipe sweating, as shown on the drawing above.
- To be welded on a Butt Welding flange head of the same DN
12
+
19011 – Rev.2 12/10